From: Shawn Guo <shawnguo@kernel.org>
To: soc@kernel.org, arm@kernel.org
Cc: Shawn Guo <shawnguo@kernel.org>, Stefan Agner <stefan@agner.ch>,
Li Yang <leoyang.li@nxp.com>,
linux-imx@nxp.com, kernel@pengutronix.de,
Fabio Estevam <festevam@gmail.com>,
linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL 4/6] i.MX device tree update for 5.11
Date: Wed, 2 Dec 2020 22:27:15 +0800 [thread overview]
Message-ID: <20201202142717.9262-4-shawnguo@kernel.org> (raw)
In-Reply-To: <20201202142717.9262-1-shawnguo@kernel.org>
The following changes since commit 3650b228f83adda7e5ee532e2b90429c03f7b9ec:
Linux 5.10-rc1 (2020-10-25 15:14:11 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt-5.11
for you to fetch changes up to 327106e4217b8ef4f74640d7de15a0a287690aba:
ARM: dts: imx28: Fix label name for L2 switch (2020-12-01 09:42:11 +0800)
----------------------------------------------------------------
i.MX device tree update for 5.11:
- New board support: imx6dl-alti6p, imx6dl-lanmcu, mx6qp-prtwd3,
imx6ul-phytec-segin and imx7d-flex-concentrator.
- Fix schema warnings for pwm-leds, watchdog and GPIO hog devices.
- A few patches from Krzysztof Kozlowski to correct compatibles for
i.MX6/7 boards.
- A series from Matthias Schiffer to polish imx7-mba7 board support.
- Update i.MX6/7 device trees for fsl,stop-mode support.
- Correct fsl,rcpm-wakeup of LS1021A to get flextimer wake-up work.
- A series of patch from Stefan Riedmueller to update phytec and segin
devices.
- Other small and random changes.
----------------------------------------------------------------
Alexander Dahl (1):
ARM: dts: imx: Fix schema warnings for pwm-leds
Bruno Thomsen (1):
ARM: dts: imx7: add support for kamstrup flex concentrator
Jagan Teki (1):
ARM: dts: imx6q-icore-ofcap10: Use 10.1" Ampire panel compatible
Jonathan Neuschäfer (2):
ARM: dts: imx50-kobo-aura: Add 'grp' suffix to pinctrl node names
ARM: dts: imx50-kobo-aura: Enable eKTF2132 touchscreen
Krzysztof Kozlowski (8):
ARM: dts: imx: align GPIO hog names with dtschema
ARM: dts: imx: align watchdog node name with dtschema
ARM: dts: vf: align watchdog node name with dtschema
ARM: dts: imx6dl-pico: fix board compatibles
ARM: dts: imx6dl: add compatibles for Aristainetos boards
ARM: dts: imx6sl-warp: correct vendor in compatible to Revotics
ARM: dts: imx7s-warp: correct vendor in compatible to Element14
ARM: dts: imx6q-pico: fix board compatibles
Lukasz Majewski (1):
ARM: dts: imx28: Fix label name for L2 switch
Marc Kleine-Budde (1):
ARM: dts: imx: Change flexcan node name to "can"
Marco Felsch (1):
ARM: dts: imx6qdl-kontron-samx6i: increase i2c-frequency
Matthias Schiffer (10):
ARM: dts: imx7-mba7: update compatible strings
ARM: dts: imx7-mba7: drop incorrect num-chipselects property
ARM: dts: imx7-mba7: remove unsupported PHY LED setup
ARM: dts: imx7-mba7: disable ethernet PHY clock outputs
ARM: dts: imx7-mba7: configure watchdog
ARM: dts: imx7-mba7: update MMC aliases
ARM: dts: imx7-mba7: add audio support
ARM: dts: imx7-mba7: enable RS485 on UART7
ARM: dts: imx7-mba7: specify USB over-current polarity
ARM: dts: imx7-mba7: set dr_mode to otg on usbotg1
Oleksij Rempel (4):
ARM: dts: imx6/7: sync fsl,stop-mode with current flexcan driver
ARM: dts: add Altesco I6P board
ARM: dts: add Van der Laan LANMCU board
ARM: dts: add Protonic WD3 board
Peng Fan (1):
ARM: dts: imx: add usb alias
Ran Wang (2):
ARM: dts: ls1021a: fix flextimer failed to wake system
ARM: dts: ls1021a: fix rcpm failed to claim resource
Stefan Riedmueller (5):
ARM: dts: imx6ul: segin: Fix stmpe touchscreen subnode name
ARM: dts: imx6: phytec: Set correct eeprom compatible
ARM: dts: imx6: phytec: Add eeprom pagesize
ARM: dts: imx6ul: phytec: Add support for optional PEB-AV-02 LCD adapter
ARM: dts: imx6ul: segin: peb-av-02: Mark stmpe touch as wakeup-source
Yuantian Tang (1):
ARM: dts: ls1021a: update calibration table for TMU module
Yunus Bas (1):
ARM: dts: imx6ul: segin: Add phyBOARD-Segin with eMMC phyCORE-i.MX6UL
arch/arm/boot/dts/Makefile | 6 +
arch/arm/boot/dts/imx25.dtsi | 2 +-
arch/arm/boot/dts/imx27.dtsi | 2 +-
arch/arm/boot/dts/imx28.dtsi | 2 +-
arch/arm/boot/dts/imx31.dtsi | 3 +-
arch/arm/boot/dts/imx35.dtsi | 2 +-
arch/arm/boot/dts/imx50-kobo-aura.dts | 41 +-
arch/arm/boot/dts/imx50.dtsi | 2 +-
arch/arm/boot/dts/imx51-zii-rdu1.dts | 2 +-
arch/arm/boot/dts/imx51.dtsi | 4 +-
arch/arm/boot/dts/imx53-ppd.dts | 15 +-
arch/arm/boot/dts/imx53.dtsi | 4 +-
arch/arm/boot/dts/imx6dl-alti6p.dts | 564 +++++++++++++++++++++
arch/arm/boot/dts/imx6dl-aristainetos2_4.dts | 2 +-
arch/arm/boot/dts/imx6dl-aristainetos2_7.dts | 2 +-
arch/arm/boot/dts/imx6dl-aristainetos_4.dts | 2 +-
arch/arm/boot/dts/imx6dl-aristainetos_7.dts | 2 +-
arch/arm/boot/dts/imx6dl-lanmcu.dts | 470 +++++++++++++++++
arch/arm/boot/dts/imx6dl-pico-dwarf.dts | 2 +-
arch/arm/boot/dts/imx6dl-pico-hobbit.dts | 2 +-
arch/arm/boot/dts/imx6dl-pico-nymph.dts | 2 +-
arch/arm/boot/dts/imx6dl-pico-pi.dts | 2 +-
arch/arm/boot/dts/imx6q-icore-ofcap10.dts | 28 +-
arch/arm/boot/dts/imx6q-pico-dwarf.dts | 2 +-
arch/arm/boot/dts/imx6q-pico-hobbit.dts | 2 +-
arch/arm/boot/dts/imx6q-pico-nymph.dts | 2 +-
arch/arm/boot/dts/imx6q-pico-pi.dts | 2 +-
arch/arm/boot/dts/imx6qdl-cubox-i.dtsi | 4 +-
arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi | 6 +-
arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 3 +-
arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi | 3 +-
arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 8 +-
arch/arm/boot/dts/imx6qdl.dtsi | 12 +-
arch/arm/boot/dts/imx6qp-prtwd3.dts | 553 ++++++++++++++++++++
arch/arm/boot/dts/imx6sl-warp.dts | 4 +-
arch/arm/boot/dts/imx6sl.dtsi | 3 +
arch/arm/boot/dts/imx6sll.dtsi | 2 +
arch/arm/boot/dts/imx6sx-softing-vining-2000.dts | 8 +-
arch/arm/boot/dts/imx6sx.dtsi | 7 +-
arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts | 2 +-
arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi | 1 +
.../boot/dts/imx6ul-phytec-segin-ff-rdk-emmc.dts | 94 ++++
.../boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts | 1 +
.../boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi | 151 ++++++
arch/arm/boot/dts/imx6ul-phytec-segin.dtsi | 43 --
arch/arm/boot/dts/imx6ul.dtsi | 10 +-
.../boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts | 1 +
.../boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts | 1 +
.../boot/dts/imx6ull-phytec-segin-peb-av-02.dtsi | 26 +
arch/arm/boot/dts/imx6ull-phytec-segin.dtsi | 7 -
arch/arm/boot/dts/imx7-mba7.dtsi | 69 ++-
arch/arm/boot/dts/imx7d-flex-concentrator-mfg.dts | 25 +
arch/arm/boot/dts/imx7d-flex-concentrator.dts | 314 ++++++++++++
arch/arm/boot/dts/imx7d-mba7.dts | 7 +-
arch/arm/boot/dts/imx7d.dtsi | 6 +
arch/arm/boot/dts/imx7s-mba7.dts | 2 +-
arch/arm/boot/dts/imx7s-warp.dts | 4 +-
arch/arm/boot/dts/imx7s.dtsi | 6 +-
arch/arm/boot/dts/ls1021a.dtsi | 81 ++-
arch/arm/boot/dts/vfxxx.dtsi | 6 +-
60 files changed, 2445 insertions(+), 196 deletions(-)
create mode 100644 arch/arm/boot/dts/imx6dl-alti6p.dts
create mode 100644 arch/arm/boot/dts/imx6dl-lanmcu.dts
create mode 100644 arch/arm/boot/dts/imx6qp-prtwd3.dts
create mode 100644 arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-emmc.dts
create mode 100644 arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi
create mode 100644 arch/arm/boot/dts/imx6ull-phytec-segin-peb-av-02.dtsi
create mode 100644 arch/arm/boot/dts/imx7d-flex-concentrator-mfg.dts
create mode 100644 arch/arm/boot/dts/imx7d-flex-concentrator.dts
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-12-02 14:29 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-02 14:27 [GIT PULL 1/6] i.MX drivers change for 5.11 Shawn Guo
2020-12-02 14:27 ` [GIT PULL 2/6] i.MX SoC update " Shawn Guo
2020-12-09 16:41 ` Arnd Bergmann
2020-12-02 14:27 ` [GIT PULL 3/6] i.MX DT bindings " Shawn Guo
2020-12-08 23:09 ` Arnd Bergmann
2020-12-02 14:27 ` Shawn Guo [this message]
2020-12-08 23:09 ` [GIT PULL 4/6] i.MX device tree " Arnd Bergmann
2020-12-02 14:27 ` [GIT PULL 5/6] i.MX arm64 device tree change " Shawn Guo
2020-12-08 23:09 ` Arnd Bergmann
2020-12-02 14:27 ` [GIT PULL 6/6] i.MX defconfig update " Shawn Guo
2020-12-08 16:34 ` Arnd Bergmann
2020-12-08 23:31 ` [GIT PULL 1/6] i.MX drivers change " Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201202142717.9262-4-shawnguo@kernel.org \
--to=shawnguo@kernel.org \
--cc=arm@kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=soc@kernel.org \
--cc=stefan@agner.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).