From: Shawn Guo <shawnguo@kernel.org>
To: soc@kernel.org, arm@kernel.org
Cc: Shawn Guo <shawnguo@kernel.org>, Stefan Agner <stefan@agner.ch>,
Li Yang <leoyang.li@nxp.com>,
linux-imx@nxp.com, kernel@pengutronix.de,
Fabio Estevam <festevam@gmail.com>,
linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL 5/6] i.MX arm64 device tree change for 5.11
Date: Wed, 2 Dec 2020 22:27:16 +0800 [thread overview]
Message-ID: <20201202142717.9262-5-shawnguo@kernel.org> (raw)
In-Reply-To: <20201202142717.9262-1-shawnguo@kernel.org>
The following changes since commit 3650b228f83adda7e5ee532e2b90429c03f7b9ec:
Linux 5.10-rc1 (2020-10-25 15:14:11 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt64-5.11
for you to fetch changes up to 0b84862688951ad5f6ad8990dd9a44e1363c4a2b:
arm64: dts: imx8mm-beacon-som: Assign PMIC clock (2020-12-01 09:49:49 +0800)
----------------------------------------------------------------
i.MX arm64 device tree changes for 5.11:
- New board support: LX2162A QDS, Kontron i.MX8M Mini SoMs and
baseboards.
- A number of patches from Adam Ford to add various audio devices for
i.MX8MM/MN and update imx8mm-beacon-som board on QSPI NOR and RTC.
- Correct WDOG_B pin configuration for i.MX8MM/MN/MP.
- A series from Ioana Ciornei complete the MAC/PCS/PHY representation
on DPAA2 devices.
- Add PMU device for i.MX8MP/MN.
- Add IR and CAN support for i.MX8MP/MN/MM EVK board.
- Adjust GIC CPU mask to match number of CPUs for i.MX8MP/MN/MM.
- A series of patch from Michael Walle to update LS1028A support with
addition of CAN and OPTEE, also ENETC PTP and FlexSPI clock input
correction.
- Add SPDIF sound card support on imx8mq-evk board.
- Misc random updates and device additions.
----------------------------------------------------------------
Adam Ford (11):
arm64: dts: imx8mm-beacon-som: Configure supplies on secondary cpus
arm64: dts: imx8mm-beacon-som: Add QSPI NOR flash support
arm64: dts: imx8mm: Add support for micfil
arm64: dts: imx8mm: Add node for SPDIF
arm64: dts: imx8mm-beacon-som: Fix whitespace issue
arm64: dts: imx8mn: Enable Asynchronous Sample Rate Converter
arm64: dts: imx8mn: Add SAI nodes
arm64: dts: imx8mn: Add support for micfil
arm64: dts: imx8mn: Add node for SPDIF
arm64: dts: imx8mm-beacon-som: Configure RTC aliases
arm64: dts: imx8mm-beacon-som: Assign PMIC clock
Anson Huang (4):
arm64: dts: imx8mn-evk: Add cpu-supply to enable cpufreq
arm64: dts: imx8mm: Correct WDOG_B pin configuration
arm64: dts: imx8mn: Correct WDOG_B pin configuration
arm64: dts: imx8mp-evk: Correct WDOG_B pin configuration
Frieder Schrempf (1):
arm64: dts: Add the Kontron i.MX8M Mini SoMs and baseboards
Ioana Ciornei (9):
arm64: dts: ls1088a: add external MDIO device nodes
arm64: dts: ls1088ardb: add QSGMII PHY nodes
arm64: dts: ls1088ardb: add necessary DTS nodes for DPMAC2
arm64: dts: ls208xa: add the external MDIO nodes
arm64: dts: ls2088ardb: add PHY nodes for the CS4340 PHYs
arm64: dts: ls2088ardb: add PHY nodes for the AQR405 PHYs
arm64: dts: ls208xa: add PCS MDIO and PCS PHY nodes
arm64: dts: lx2160a: add PCS MDIO and PCS PHY nodes
arm64: dts: lx2160ardb: add nodes for the AQR107 PHYs
Jacky Bai (2):
arm64: dts: freescale: Add pmu support on imx8mp
arm64: dts: freescale: Add pmu support on imx8mn
Joakim Zhang (4):
arm64: dts: imx8mp-evk: add CAN support
arm64: dts: imx8mq-evk: add linux,autosuspend-period property for IR
arm64: dts: imx8mm-evk: add IR support
arm64: dts: imx8mn-evk: add IR support
Krzysztof Kozlowski (5):
arm64: dts: imx8mq-librem5: align GPIO hog names with dtschema
arm64: dts: freescale: align watchdog node name with dtschema
arm64: dts: imx8mm: adjust GIC CPU mask to match number of CPUs
arm64: dts: imx8mn: adjust GIC CPU mask to match number of CPUs
arm64: dts: imx8mp: adjust GIC CPU mask to match number of CPUs
Meenakshi Aggarwal (1):
arm64: dts: lx2160a: add device tree for lx2162aqds board
Michael Walle (6):
arm64: dts: ls1028a: add missing CAN nodes
arm64: dts: freescale: sl28: add CAN node
arm64: dts: ls1028a: fix ENETC PTP clock input
arm64: dts: ls1028a: fix FlexSPI clock input
arm64: dts: ls1028a: add optee node
arm64: dts: freescale: sl28: combine SPI MTD partitions
Nathan Chancellor (1):
arm64: dts: imx: Fix imx8mm-kontron-n801x-s.dtb target
Serge Semin (1):
arm64: dts: layerscape: Harmonize DWC USB3 DT nodes name
Shengjiu Wang (2):
arm64: dts: imx8mq: Configure clock rate for audio plls
arm64: dts: imx8mq-evk: Add spdif sound card support
Vladimir Oltean (1):
arm64: dts: ls1028a: make the eMMC and SD card controllers use fixed indices
Xiaowei Bao (1):
arm64: dts: layerscape: Add PCIe EP node for ls1088a
Yuantian Tang (1):
arm64: dts: freescale: update calibration table for TMU module
arch/arm64/boot/dts/freescale/Makefile | 2 +
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 69 +++--
.../dts/freescale/fsl-ls1028a-kontron-sl28.dts | 18 +-
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 2 +
arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 2 +
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 30 +-
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 86 +++---
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 72 ++---
arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 119 ++++++++
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 136 ++++++++-
arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts | 120 ++++++++
arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 278 +++++++++++++++--
arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 32 ++
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 288 ++++++++++++++++--
arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts | 334 +++++++++++++++++++++
.../boot/dts/freescale/imx8mm-beacon-som.dtsi | 326 +++++++++++---------
arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi | 16 +-
.../boot/dts/freescale/imx8mm-kontron-n801x-s.dts | 322 ++++++++++++++++++++
.../dts/freescale/imx8mm-kontron-n801x-som.dtsi | 294 ++++++++++++++++++
arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi | 2 +-
arch/arm64/boot/dts/freescale/imx8mm.dtsi | 53 +++-
arch/arm64/boot/dts/freescale/imx8mn-evk.dts | 32 +-
arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi | 16 +-
arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi | 2 +-
arch/arm64/boot/dts/freescale/imx8mn.dtsi | 158 +++++++++-
arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 64 +++-
arch/arm64/boot/dts/freescale/imx8mp.dtsi | 45 ++-
arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 39 +++
arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 2 +-
arch/arm64/boot/dts/freescale/imx8mq.dtsi | 68 ++++-
30 files changed, 2681 insertions(+), 346 deletions(-)
create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-12-02 14:29 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-02 14:27 [GIT PULL 1/6] i.MX drivers change for 5.11 Shawn Guo
2020-12-02 14:27 ` [GIT PULL 2/6] i.MX SoC update " Shawn Guo
2020-12-09 16:41 ` Arnd Bergmann
2020-12-02 14:27 ` [GIT PULL 3/6] i.MX DT bindings " Shawn Guo
2020-12-08 23:09 ` Arnd Bergmann
2020-12-02 14:27 ` [GIT PULL 4/6] i.MX device tree " Shawn Guo
2020-12-08 23:09 ` Arnd Bergmann
2020-12-02 14:27 ` Shawn Guo [this message]
2020-12-08 23:09 ` [GIT PULL 5/6] i.MX arm64 device tree change " Arnd Bergmann
2020-12-02 14:27 ` [GIT PULL 6/6] i.MX defconfig update " Shawn Guo
2020-12-08 16:34 ` Arnd Bergmann
2020-12-08 23:31 ` [GIT PULL 1/6] i.MX drivers change " Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201202142717.9262-5-shawnguo@kernel.org \
--to=shawnguo@kernel.org \
--cc=arm@kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=soc@kernel.org \
--cc=stefan@agner.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).