linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Ard Biesheuvel <ardb@kernel.org>
To: linux-efi@vger.kernel.org
Cc: Samer El-Haj-Mahmoud <Samer.El-Haj-Mahmoud@arm.com>,
	Ard Biesheuvel <ardb@kernel.org>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/2] efi: capsule: clean scatter-gather entries from the D-cache
Date: Mon,  7 Dec 2020 19:02:15 +0100	[thread overview]
Message-ID: <20201207180216.3349-2-ardb@kernel.org> (raw)
In-Reply-To: <20201207180216.3349-1-ardb@kernel.org>

The UEFI spec 2.9 has recently been updated to include a requirement
that scatter-gather lists passed to UpdateCapsule() should be cleaned
from the D-cache to ensure that they are visible to the CPU after a
warm reboot before it enables the MMU. On ARM and arm64 systems, this
implies a D-cache clean by virtual address to the point of coherency.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
---
 arch/arm/include/asm/efi.h     |  5 +++++
 arch/arm64/include/asm/efi.h   |  5 +++++
 drivers/firmware/efi/capsule.c | 12 ++++++++++++
 3 files changed, 22 insertions(+)

diff --git a/arch/arm/include/asm/efi.h b/arch/arm/include/asm/efi.h
index 3ee4f4381985..e9a06e164e06 100644
--- a/arch/arm/include/asm/efi.h
+++ b/arch/arm/include/asm/efi.h
@@ -93,4 +93,9 @@ struct efi_arm_entry_state {
 	u32	sctlr_after_ebs;
 };
 
+static inline void efi_capsule_flush_cache_range(void *addr, int size)
+{
+	__cpuc_flush_dcache_area(addr, size);
+}
+
 #endif /* _ASM_ARM_EFI_H */
diff --git a/arch/arm64/include/asm/efi.h b/arch/arm64/include/asm/efi.h
index 973b14415271..00bd1e179d36 100644
--- a/arch/arm64/include/asm/efi.h
+++ b/arch/arm64/include/asm/efi.h
@@ -141,4 +141,9 @@ static inline void efi_set_pgd(struct mm_struct *mm)
 void efi_virtmap_load(void);
 void efi_virtmap_unload(void);
 
+static inline void efi_capsule_flush_cache_range(void *addr, int size)
+{
+	__flush_dcache_area(addr, size);
+}
+
 #endif /* _ASM_EFI_H */
diff --git a/drivers/firmware/efi/capsule.c b/drivers/firmware/efi/capsule.c
index 43f6fe7bfe80..768430293669 100644
--- a/drivers/firmware/efi/capsule.c
+++ b/drivers/firmware/efi/capsule.c
@@ -12,6 +12,7 @@
 #include <linux/highmem.h>
 #include <linux/efi.h>
 #include <linux/vmalloc.h>
+#include <asm/efi.h>
 #include <asm/io.h>
 
 typedef struct {
@@ -265,6 +266,17 @@ int efi_capsule_update(efi_capsule_header_t *capsule, phys_addr_t *pages)
 		else
 			sglist[j].data = page_to_phys(sg_pages[i + 1]);
 
+#if defined(CONFIG_ARM) || defined(CONFIG_ARM64)
+		/*
+		 * At runtime, the firmware has no way to find out where the
+		 * sglist elements are mapped, if they are mapped in the first
+		 * place. Therefore, on architectures that can only perform
+		 * cache maintenance by virtual address, the firmware is unable
+		 * to perform this maintenance, and so it is up to the OS to do
+		 * it instead.
+		 */
+		efi_capsule_flush_cache_range(sglist, PAGE_SIZE);
+#endif
 		kunmap_atomic(sglist);
 	}
 
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2020-12-07 18:03 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-07 18:02 [PATCH 0/2] efi capsule loader fixes Ard Biesheuvel
2020-12-07 18:02 ` Ard Biesheuvel [this message]
2020-12-07 18:02 ` [PATCH 1/2] efi: capsule: use atomic kmap for transient sglist mappings Ard Biesheuvel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201207180216.3349-2-ardb@kernel.org \
    --to=ardb@kernel.org \
    --cc=Samer.El-Haj-Mahmoud@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-efi@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).