From: Mel Gorman <mgorman@techsingularity.net>
To: Peter Ziljstra <peterz@infradead.org>,
Ingo Molnar <mingo@redhat.com>,
LKML <linux-kernel@vger.kernel.org>
Cc: Barry Song <song.bao.hua@hisilicon.com>,
Juri Lelli <juri.lelli@redhat.com>,
Vincent Guittot <vincent.guittot@linaro.org>,
Aubrey Li <aubrey.li@linux.intel.com>,
Mel Gorman <mgorman@techsingularity.net>,
Valentin Schneider <valentin.schneider@arm.com>,
Linux-ARM <linux-arm-kernel@lists.infradead.org>
Subject: [PATCH 4/4] sched/fair: Return an idle cpu if one is found after a failed search for an idle core
Date: Tue, 8 Dec 2020 15:35:01 +0000 [thread overview]
Message-ID: <20201208153501.1467-5-mgorman@techsingularity.net> (raw)
In-Reply-To: <20201208153501.1467-1-mgorman@techsingularity.net>
select_idle_core is called when SMT is active and there is likely a free
core available. It may find idle CPUs but this information is simply
discarded and the scan starts over again with select_idle_cpu.
This patch caches information on idle CPUs found during the search for
a core and uses one if no core is found. This is a tradeoff. There may
be a slight impact when utilisation is low and an idle core can be
found quickly. It provides improvements as the number of busy CPUs
approaches 50% of the domain size when SMT is enabled.
With tbench on a 2-socket CascadeLake machine, 80 logical CPUs, HT enabled
5.10.0-rc6 5.10.0-rc6
schedstat idlecandidate
Hmean 1 500.06 ( 0.00%) 505.67 * 1.12%*
Hmean 2 975.90 ( 0.00%) 974.06 * -0.19%*
Hmean 4 1902.95 ( 0.00%) 1904.43 * 0.08%*
Hmean 8 3761.73 ( 0.00%) 3721.02 * -1.08%*
Hmean 16 6713.93 ( 0.00%) 6769.17 * 0.82%*
Hmean 32 10435.31 ( 0.00%) 10312.58 * -1.18%*
Hmean 64 12325.51 ( 0.00%) 13792.01 * 11.90%*
Hmean 128 21225.21 ( 0.00%) 20963.44 * -1.23%*
Hmean 256 20532.83 ( 0.00%) 20335.62 * -0.96%*
Hmean 320 20334.81 ( 0.00%) 20147.25 * -0.92%*
Note that there is a significant corner case. As the SMT scan may be
terminated early, not all CPUs have been visited and select_idle_cpu()
is still called for a full scan. This case is handled in the next
patch.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
---
kernel/sched/fair.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index 413d895bbbf8..ed6f45832d97 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -6066,6 +6066,7 @@ void __update_idle_core(struct rq *rq)
*/
static int select_idle_core(struct task_struct *p, struct sched_domain *sd, int target)
{
+ int idle_candidate = -1;
struct cpumask *cpus = this_cpu_cpumask_var_ptr(select_idle_mask);
int core, cpu;
@@ -6085,6 +6086,11 @@ static int select_idle_core(struct task_struct *p, struct sched_domain *sd, int
idle = false;
break;
}
+
+ if (idle_candidate == -1 &&
+ cpumask_test_cpu(cpu, p->cpus_ptr)) {
+ idle_candidate = cpu;
+ }
}
if (idle)
@@ -6098,7 +6104,7 @@ static int select_idle_core(struct task_struct *p, struct sched_domain *sd, int
*/
set_idle_cores(target, 0);
- return -1;
+ return idle_candidate;
}
/*
--
2.26.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-12-08 15:37 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-08 15:34 [PATCH 0/4] Reduce scanning of runqueues in select_idle_sibling Mel Gorman
2020-12-08 15:34 ` [PATCH 1/4] sched/fair: Remove SIS_AVG_CPU Mel Gorman
2020-12-08 16:13 ` Vincent Guittot
2020-12-08 15:34 ` [PATCH 2/4] sched/fair: Move avg_scan_cost calculations under SIS_PROP Mel Gorman
2020-12-08 16:03 ` Vincent Guittot
2020-12-08 16:30 ` Mel Gorman
2020-12-09 5:28 ` Li, Aubrey
2020-12-09 9:05 ` Mel Gorman
2020-12-09 11:07 ` Li, Aubrey
2020-12-09 11:33 ` Mel Gorman
2020-12-10 5:18 ` Li, Aubrey
2020-12-10 9:32 ` Mel Gorman
2020-12-08 15:35 ` [PATCH 3/4] sched/fair: Do not replace recent_used_cpu with the new target Mel Gorman
2020-12-08 16:14 ` Vincent Guittot
2020-12-10 9:40 ` Vincent Guittot
2020-12-11 6:25 ` Hillf Danton
2020-12-11 9:02 ` Mel Gorman
2020-12-11 9:34 ` Hillf Danton
2020-12-11 9:45 ` Mel Gorman
2020-12-08 15:35 ` Mel Gorman [this message]
2020-12-08 16:15 ` [PATCH 4/4] sched/fair: Return an idle cpu if one is found after a failed search for an idle core Vincent Guittot
2020-12-09 14:37 ` [PATCH 0/4] Reduce scanning of runqueues in select_idle_sibling Mel Gorman
2020-12-10 8:00 ` Vincent Guittot
2020-12-10 9:38 ` Vincent Guittot
2020-12-10 11:04 ` Mel Gorman
2020-12-11 9:51 ` Vincent Guittot
2020-12-11 10:23 ` Mel Gorman
2020-12-12 10:02 ` Vincent Guittot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201208153501.1467-5-mgorman@techsingularity.net \
--to=mgorman@techsingularity.net \
--cc=aubrey.li@linux.intel.com \
--cc=juri.lelli@redhat.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=peterz@infradead.org \
--cc=song.bao.hua@hisilicon.com \
--cc=valentin.schneider@arm.com \
--cc=vincent.guittot@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).