From: Maxime Ripard <maxime@cerno.tech>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Thomas Zimmermann <tzimmermann@suse.de>,
Maxime Ripard <maxime@cerno.tech>,
Daniel Vetter <daniel.vetter@intel.com>,
David Airlie <airlied@linux.ie>, Eric Anholt <eric@anholt.net>
Cc: dri-devel@lists.freedesktop.org,
bcm-kernel-feedback-list@broadcom.com,
linux-rpi-kernel@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
Dave Stevenson <dave.stevenson@raspberrypi.com>
Subject: [PATCH v6 1/9] drm/vc4: hvs: Align the HVS atomic hooks to the new API
Date: Thu, 10 Dec 2020 15:23:21 +0100 [thread overview]
Message-ID: <20201210142329.10640-2-maxime@cerno.tech> (raw)
In-Reply-To: <20201210142329.10640-1-maxime@cerno.tech>
Since the CRTC setup in vc4 is split between the PixelValves/TXP and the
HVS, only the PV/TXP atomic hooks were updated in the previous commits, but
it makes sense to update the HVS ones too.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
drivers/gpu/drm/vc4/vc4_crtc.c | 4 +---
drivers/gpu/drm/vc4/vc4_drv.h | 4 ++--
drivers/gpu/drm/vc4/vc4_hvs.c | 8 +++++---
drivers/gpu/drm/vc4/vc4_txp.c | 8 ++------
4 files changed, 10 insertions(+), 14 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c
index 06088854c647..e02e499885ed 100644
--- a/drivers/gpu/drm/vc4/vc4_crtc.c
+++ b/drivers/gpu/drm/vc4/vc4_crtc.c
@@ -503,8 +503,6 @@ static void vc4_crtc_atomic_disable(struct drm_crtc *crtc,
static void vc4_crtc_atomic_enable(struct drm_crtc *crtc,
struct drm_atomic_state *state)
{
- struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state,
- crtc);
struct drm_device *dev = crtc->dev;
struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
struct drm_encoder *encoder = vc4_get_crtc_encoder(crtc);
@@ -517,7 +515,7 @@ static void vc4_crtc_atomic_enable(struct drm_crtc *crtc,
*/
drm_crtc_vblank_on(crtc);
- vc4_hvs_atomic_enable(crtc, old_state);
+ vc4_hvs_atomic_enable(crtc, state);
if (vc4_encoder->pre_crtc_configure)
vc4_encoder->pre_crtc_configure(encoder);
diff --git a/drivers/gpu/drm/vc4/vc4_drv.h b/drivers/gpu/drm/vc4/vc4_drv.h
index c5f2944d5bc6..c47c85533805 100644
--- a/drivers/gpu/drm/vc4/vc4_drv.h
+++ b/drivers/gpu/drm/vc4/vc4_drv.h
@@ -918,8 +918,8 @@ extern struct platform_driver vc4_hvs_driver;
void vc4_hvs_stop_channel(struct drm_device *dev, unsigned int output);
int vc4_hvs_get_fifo_from_output(struct drm_device *dev, unsigned int output);
int vc4_hvs_atomic_check(struct drm_crtc *crtc, struct drm_crtc_state *state);
-void vc4_hvs_atomic_enable(struct drm_crtc *crtc, struct drm_crtc_state *old_state);
-void vc4_hvs_atomic_disable(struct drm_crtc *crtc, struct drm_crtc_state *old_state);
+void vc4_hvs_atomic_enable(struct drm_crtc *crtc, struct drm_atomic_state *state);
+void vc4_hvs_atomic_disable(struct drm_crtc *crtc, struct drm_atomic_state *state);
void vc4_hvs_atomic_flush(struct drm_crtc *crtc, struct drm_crtc_state *state);
void vc4_hvs_dump_state(struct drm_device *dev);
void vc4_hvs_unmask_underrun(struct drm_device *dev, int channel);
diff --git a/drivers/gpu/drm/vc4/vc4_hvs.c b/drivers/gpu/drm/vc4/vc4_hvs.c
index b72b2bd05a81..04396dec63fc 100644
--- a/drivers/gpu/drm/vc4/vc4_hvs.c
+++ b/drivers/gpu/drm/vc4/vc4_hvs.c
@@ -391,11 +391,12 @@ static void vc4_hvs_update_dlist(struct drm_crtc *crtc)
}
void vc4_hvs_atomic_enable(struct drm_crtc *crtc,
- struct drm_crtc_state *old_state)
+ struct drm_atomic_state *state)
{
struct drm_device *dev = crtc->dev;
struct vc4_dev *vc4 = to_vc4_dev(dev);
- struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(crtc->state);
+ struct drm_crtc_state *new_crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
+ struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(new_crtc_state);
struct drm_display_mode *mode = &crtc->state->adjusted_mode;
bool oneshot = vc4_state->feed_txp;
@@ -404,9 +405,10 @@ void vc4_hvs_atomic_enable(struct drm_crtc *crtc,
}
void vc4_hvs_atomic_disable(struct drm_crtc *crtc,
- struct drm_crtc_state *old_state)
+ struct drm_atomic_state *state)
{
struct drm_device *dev = crtc->dev;
+ struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc);
struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(old_state);
unsigned int chan = vc4_state->assigned_channel;
diff --git a/drivers/gpu/drm/vc4/vc4_txp.c b/drivers/gpu/drm/vc4/vc4_txp.c
index 34612edcabbd..4a26750b5e93 100644
--- a/drivers/gpu/drm/vc4/vc4_txp.c
+++ b/drivers/gpu/drm/vc4/vc4_txp.c
@@ -406,23 +406,19 @@ static int vc4_txp_atomic_check(struct drm_crtc *crtc,
static void vc4_txp_atomic_enable(struct drm_crtc *crtc,
struct drm_atomic_state *state)
{
- struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state,
- crtc);
drm_crtc_vblank_on(crtc);
- vc4_hvs_atomic_enable(crtc, old_state);
+ vc4_hvs_atomic_enable(crtc, state);
}
static void vc4_txp_atomic_disable(struct drm_crtc *crtc,
struct drm_atomic_state *state)
{
- struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state,
- crtc);
struct drm_device *dev = crtc->dev;
/* Disable vblank irq handling before crtc is disabled. */
drm_crtc_vblank_off(crtc);
- vc4_hvs_atomic_disable(crtc, old_state);
+ vc4_hvs_atomic_disable(crtc, state);
/*
* Make sure we issue a vblank event after disabling the CRTC if
--
2.28.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-12-10 14:25 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-10 14:23 [PATCH v6 0/9] drm/vc4: hdmi: Support the 10/12 bit output Maxime Ripard
2020-12-10 14:23 ` Maxime Ripard [this message]
2020-12-10 14:23 ` [PATCH v6 2/9] drm/vc4: Pass the atomic state to encoder hooks Maxime Ripard
2020-12-10 14:23 ` [PATCH v6 3/9] drm/vc4: hdmi: Take into account the clock doubling flag in atomic_check Maxime Ripard
2020-12-10 14:23 ` [PATCH v6 4/9] drm/vc4: hdmi: Don't access the connector state in reset if kmalloc fails Maxime Ripard
2020-12-10 14:23 ` [PATCH v6 5/9] drm/vc4: hdmi: Create a custom connector state Maxime Ripard
2020-12-10 14:26 ` Maxime Ripard
2020-12-15 11:02 ` Dave Stevenson
2020-12-10 14:23 ` [PATCH v6 6/9] drm/vc4: hdmi: Store pixel frequency in the " Maxime Ripard
2020-12-10 14:23 ` [PATCH v6 7/9] drm/vc4: hdmi: Use the connector state pixel rate for the PHY Maxime Ripard
2020-12-10 14:23 ` [PATCH v6 8/9] drm/vc4: hdmi: Limit the BCM2711 to the max without scrambling Maxime Ripard
2020-12-10 14:23 ` [PATCH v6 9/9] drm/vc4: hdmi: Enable 10/12 bpc output Maxime Ripard
2020-12-15 11:04 ` Dave Stevenson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201210142329.10640-2-maxime@cerno.tech \
--to=maxime@cerno.tech \
--cc=airlied@linux.ie \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=daniel.vetter@intel.com \
--cc=dave.stevenson@raspberrypi.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=eric@anholt.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).