From: Maxime Ripard <maxime@cerno.tech>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Thomas Zimmermann <tzimmermann@suse.de>,
Maxime Ripard <maxime@cerno.tech>,
Daniel Vetter <daniel.vetter@intel.com>,
David Airlie <airlied@linux.ie>, Eric Anholt <eric@anholt.net>
Cc: dri-devel@lists.freedesktop.org,
bcm-kernel-feedback-list@broadcom.com,
linux-rpi-kernel@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
Dave Stevenson <dave.stevenson@raspberrypi.com>
Subject: [PATCH v6 2/9] drm/vc4: Pass the atomic state to encoder hooks
Date: Thu, 10 Dec 2020 15:23:22 +0100 [thread overview]
Message-ID: <20201210142329.10640-3-maxime@cerno.tech> (raw)
In-Reply-To: <20201210142329.10640-1-maxime@cerno.tech>
We'll need to access the connector state in our encoder setup, so let's
just pass the whole DRM state to our private encoder hooks.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
drivers/gpu/drm/vc4/vc4_crtc.c | 18 ++++++++++--------
drivers/gpu/drm/vc4/vc4_drv.h | 10 +++++-----
drivers/gpu/drm/vc4/vc4_hdmi.c | 15 ++++++++++-----
3 files changed, 25 insertions(+), 18 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c
index e02e499885ed..a3439756594c 100644
--- a/drivers/gpu/drm/vc4/vc4_crtc.c
+++ b/drivers/gpu/drm/vc4/vc4_crtc.c
@@ -403,7 +403,9 @@ static void require_hvs_enabled(struct drm_device *dev)
SCALER_DISPCTRL_ENABLE);
}
-static int vc4_crtc_disable(struct drm_crtc *crtc, unsigned int channel)
+static int vc4_crtc_disable(struct drm_crtc *crtc,
+ struct drm_atomic_state *state,
+ unsigned int channel)
{
struct drm_encoder *encoder = vc4_get_crtc_encoder(crtc);
struct vc4_encoder *vc4_encoder = to_vc4_encoder(encoder);
@@ -435,13 +437,13 @@ static int vc4_crtc_disable(struct drm_crtc *crtc, unsigned int channel)
mdelay(20);
if (vc4_encoder && vc4_encoder->post_crtc_disable)
- vc4_encoder->post_crtc_disable(encoder);
+ vc4_encoder->post_crtc_disable(encoder, state);
vc4_crtc_pixelvalve_reset(crtc);
vc4_hvs_stop_channel(dev, channel);
if (vc4_encoder && vc4_encoder->post_crtc_powerdown)
- vc4_encoder->post_crtc_powerdown(encoder);
+ vc4_encoder->post_crtc_powerdown(encoder, state);
return 0;
}
@@ -468,7 +470,7 @@ int vc4_crtc_disable_at_boot(struct drm_crtc *crtc)
if (channel < 0)
return 0;
- return vc4_crtc_disable(crtc, channel);
+ return vc4_crtc_disable(crtc, NULL, channel);
}
static void vc4_crtc_atomic_disable(struct drm_crtc *crtc,
@@ -484,7 +486,7 @@ static void vc4_crtc_atomic_disable(struct drm_crtc *crtc,
/* Disable vblank irq handling before crtc is disabled. */
drm_crtc_vblank_off(crtc);
- vc4_crtc_disable(crtc, old_vc4_state->assigned_channel);
+ vc4_crtc_disable(crtc, state, old_vc4_state->assigned_channel);
/*
* Make sure we issue a vblank event after disabling the CRTC if
@@ -518,14 +520,14 @@ static void vc4_crtc_atomic_enable(struct drm_crtc *crtc,
vc4_hvs_atomic_enable(crtc, state);
if (vc4_encoder->pre_crtc_configure)
- vc4_encoder->pre_crtc_configure(encoder);
+ vc4_encoder->pre_crtc_configure(encoder, state);
vc4_crtc_config_pv(crtc);
CRTC_WRITE(PV_CONTROL, CRTC_READ(PV_CONTROL) | PV_CONTROL_EN);
if (vc4_encoder->pre_crtc_enable)
- vc4_encoder->pre_crtc_enable(encoder);
+ vc4_encoder->pre_crtc_enable(encoder, state);
/* When feeding the transposer block the pixelvalve is unneeded and
* should not be enabled.
@@ -534,7 +536,7 @@ static void vc4_crtc_atomic_enable(struct drm_crtc *crtc,
CRTC_READ(PV_V_CONTROL) | PV_VCONTROL_VIDEN);
if (vc4_encoder->post_crtc_enable)
- vc4_encoder->post_crtc_enable(encoder);
+ vc4_encoder->post_crtc_enable(encoder, state);
}
static enum drm_mode_status vc4_crtc_mode_valid(struct drm_crtc *crtc,
diff --git a/drivers/gpu/drm/vc4/vc4_drv.h b/drivers/gpu/drm/vc4/vc4_drv.h
index c47c85533805..b404cd3ab0d8 100644
--- a/drivers/gpu/drm/vc4/vc4_drv.h
+++ b/drivers/gpu/drm/vc4/vc4_drv.h
@@ -444,12 +444,12 @@ struct vc4_encoder {
enum vc4_encoder_type type;
u32 clock_select;
- void (*pre_crtc_configure)(struct drm_encoder *encoder);
- void (*pre_crtc_enable)(struct drm_encoder *encoder);
- void (*post_crtc_enable)(struct drm_encoder *encoder);
+ void (*pre_crtc_configure)(struct drm_encoder *encoder, struct drm_atomic_state *state);
+ void (*pre_crtc_enable)(struct drm_encoder *encoder, struct drm_atomic_state *state);
+ void (*post_crtc_enable)(struct drm_encoder *encoder, struct drm_atomic_state *state);
- void (*post_crtc_disable)(struct drm_encoder *encoder);
- void (*post_crtc_powerdown)(struct drm_encoder *encoder);
+ void (*post_crtc_disable)(struct drm_encoder *encoder, struct drm_atomic_state *state);
+ void (*post_crtc_powerdown)(struct drm_encoder *encoder, struct drm_atomic_state *state);
};
static inline struct vc4_encoder *
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index afc178b0d89f..5a608ed1d75e 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -357,7 +357,8 @@ static void vc4_hdmi_set_infoframes(struct drm_encoder *encoder)
vc4_hdmi_set_audio_infoframe(encoder);
}
-static void vc4_hdmi_encoder_post_crtc_disable(struct drm_encoder *encoder)
+static void vc4_hdmi_encoder_post_crtc_disable(struct drm_encoder *encoder,
+ struct drm_atomic_state *state)
{
struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
@@ -370,7 +371,8 @@ static void vc4_hdmi_encoder_post_crtc_disable(struct drm_encoder *encoder)
HDMI_READ(HDMI_VID_CTL) | VC4_HD_VID_CTL_BLANKPIX);
}
-static void vc4_hdmi_encoder_post_crtc_powerdown(struct drm_encoder *encoder)
+static void vc4_hdmi_encoder_post_crtc_powerdown(struct drm_encoder *encoder,
+ struct drm_atomic_state *state)
{
struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
int ret;
@@ -584,7 +586,8 @@ static void vc4_hdmi_recenter_fifo(struct vc4_hdmi *vc4_hdmi)
"VC4_HDMI_FIFO_CTL_RECENTER_DONE");
}
-static void vc4_hdmi_encoder_pre_crtc_configure(struct drm_encoder *encoder)
+static void vc4_hdmi_encoder_pre_crtc_configure(struct drm_encoder *encoder,
+ struct drm_atomic_state *state)
{
struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
@@ -676,7 +679,8 @@ static void vc4_hdmi_encoder_pre_crtc_configure(struct drm_encoder *encoder)
vc4_hdmi->variant->set_timings(vc4_hdmi, mode);
}
-static void vc4_hdmi_encoder_pre_crtc_enable(struct drm_encoder *encoder)
+static void vc4_hdmi_encoder_pre_crtc_enable(struct drm_encoder *encoder,
+ struct drm_atomic_state *state)
{
struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
struct vc4_hdmi_encoder *vc4_encoder = to_vc4_hdmi_encoder(encoder);
@@ -698,7 +702,8 @@ static void vc4_hdmi_encoder_pre_crtc_enable(struct drm_encoder *encoder)
HDMI_WRITE(HDMI_FIFO_CTL, VC4_HDMI_FIFO_CTL_MASTER_SLAVE_N);
}
-static void vc4_hdmi_encoder_post_crtc_enable(struct drm_encoder *encoder)
+static void vc4_hdmi_encoder_post_crtc_enable(struct drm_encoder *encoder,
+ struct drm_atomic_state *state)
{
struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
--
2.28.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-12-10 14:25 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-10 14:23 [PATCH v6 0/9] drm/vc4: hdmi: Support the 10/12 bit output Maxime Ripard
2020-12-10 14:23 ` [PATCH v6 1/9] drm/vc4: hvs: Align the HVS atomic hooks to the new API Maxime Ripard
2020-12-10 14:23 ` Maxime Ripard [this message]
2020-12-10 14:23 ` [PATCH v6 3/9] drm/vc4: hdmi: Take into account the clock doubling flag in atomic_check Maxime Ripard
2020-12-10 14:23 ` [PATCH v6 4/9] drm/vc4: hdmi: Don't access the connector state in reset if kmalloc fails Maxime Ripard
2020-12-10 14:23 ` [PATCH v6 5/9] drm/vc4: hdmi: Create a custom connector state Maxime Ripard
2020-12-10 14:26 ` Maxime Ripard
2020-12-15 11:02 ` Dave Stevenson
2020-12-10 14:23 ` [PATCH v6 6/9] drm/vc4: hdmi: Store pixel frequency in the " Maxime Ripard
2020-12-10 14:23 ` [PATCH v6 7/9] drm/vc4: hdmi: Use the connector state pixel rate for the PHY Maxime Ripard
2020-12-10 14:23 ` [PATCH v6 8/9] drm/vc4: hdmi: Limit the BCM2711 to the max without scrambling Maxime Ripard
2020-12-10 14:23 ` [PATCH v6 9/9] drm/vc4: hdmi: Enable 10/12 bpc output Maxime Ripard
2020-12-15 11:04 ` Dave Stevenson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201210142329.10640-3-maxime@cerno.tech \
--to=maxime@cerno.tech \
--cc=airlied@linux.ie \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=daniel.vetter@intel.com \
--cc=dave.stevenson@raspberrypi.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=eric@anholt.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).