From: Maxime Ripard <maxime@cerno.tech>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Thomas Zimmermann <tzimmermann@suse.de>,
Maxime Ripard <maxime@cerno.tech>,
Daniel Vetter <daniel.vetter@intel.com>,
David Airlie <airlied@linux.ie>, Eric Anholt <eric@anholt.net>
Cc: dri-devel@lists.freedesktop.org,
bcm-kernel-feedback-list@broadcom.com,
linux-rpi-kernel@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
Dave Stevenson <dave.stevenson@raspberrypi.com>
Subject: [PATCH v6 5/9] drm/vc4: hdmi: Create a custom connector state
Date: Thu, 10 Dec 2020 15:23:25 +0100 [thread overview]
Message-ID: <20201210142329.10640-6-maxime@cerno.tech> (raw)
In-Reply-To: <20201210142329.10640-1-maxime@cerno.tech>
When run with a higher bpc than 8, the clock of the HDMI controller needs
to be adjusted. Let's create a connector state that will be used at
atomic_check and atomic_enable to compute and store the clock rate
associated to the state.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 33 ++++++++++++++++++++++++++++++---
drivers/gpu/drm/vc4/vc4_hdmi.h | 10 ++++++++++
2 files changed, 40 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 61039cc89d9d..8978df3f0ca4 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -170,10 +170,37 @@ static int vc4_hdmi_connector_get_modes(struct drm_connector *connector)
static void vc4_hdmi_connector_reset(struct drm_connector *connector)
{
- drm_atomic_helper_connector_reset(connector);
+ struct vc4_hdmi_connector_state *old_state =
+ conn_state_to_vc4_hdmi_conn_state(connector->state);
+ struct vc4_hdmi_connector_state *new_state =
+ kzalloc(sizeof(*conn_state), GFP_KERNEL);
if (connector->state)
- drm_atomic_helper_connector_tv_reset(connector);
+ __drm_atomic_helper_connector_destroy_state(connector->state);
+
+ kfree(old_state);
+
+ if (!new_state)
+ return;
+
+ __drm_atomic_helper_connector_reset(connector, &new_state->base);
+ drm_atomic_helper_connector_tv_reset(connector);
+}
+
+static struct drm_connector_state *
+vc4_hdmi_connector_duplicate_state(struct drm_connector *connector)
+{
+ struct drm_connector_state *conn_state = connector->state;
+ struct vc4_hdmi_connector_state *vc4_state = conn_state_to_vc4_hdmi_conn_state(conn_state);
+ struct vc4_hdmi_connector_state *new_state;
+
+ new_state = kzalloc(sizeof(*new_state), GFP_KERNEL);
+ if (!new_state)
+ return NULL;
+
+ __drm_atomic_helper_connector_duplicate_state(connector, &new_state->base);
+
+ return &new_state->base;
}
static const struct drm_connector_funcs vc4_hdmi_connector_funcs = {
@@ -181,7 +208,7 @@ static const struct drm_connector_funcs vc4_hdmi_connector_funcs = {
.fill_modes = drm_helper_probe_single_connector_modes,
.destroy = vc4_hdmi_connector_destroy,
.reset = vc4_hdmi_connector_reset,
- .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+ .atomic_duplicate_state = vc4_hdmi_connector_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
};
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h
index 0526a9cf608a..2cf5362052e2 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.h
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
@@ -180,6 +180,16 @@ encoder_to_vc4_hdmi(struct drm_encoder *encoder)
return container_of(_encoder, struct vc4_hdmi, encoder);
}
+struct vc4_hdmi_connector_state {
+ struct drm_connector_state base;
+};
+
+static inline struct vc4_hdmi_connector_state *
+conn_state_to_vc4_hdmi_conn_state(struct drm_connector_state *conn_state)
+{
+ return container_of(conn_state, struct vc4_hdmi_connector_state, base);
+}
+
void vc4_hdmi_phy_init(struct vc4_hdmi *vc4_hdmi,
struct drm_display_mode *mode);
void vc4_hdmi_phy_disable(struct vc4_hdmi *vc4_hdmi);
--
2.28.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-12-10 14:25 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-10 14:23 [PATCH v6 0/9] drm/vc4: hdmi: Support the 10/12 bit output Maxime Ripard
2020-12-10 14:23 ` [PATCH v6 1/9] drm/vc4: hvs: Align the HVS atomic hooks to the new API Maxime Ripard
2020-12-10 14:23 ` [PATCH v6 2/9] drm/vc4: Pass the atomic state to encoder hooks Maxime Ripard
2020-12-10 14:23 ` [PATCH v6 3/9] drm/vc4: hdmi: Take into account the clock doubling flag in atomic_check Maxime Ripard
2020-12-10 14:23 ` [PATCH v6 4/9] drm/vc4: hdmi: Don't access the connector state in reset if kmalloc fails Maxime Ripard
2020-12-10 14:23 ` Maxime Ripard [this message]
2020-12-10 14:26 ` [PATCH v6 5/9] drm/vc4: hdmi: Create a custom connector state Maxime Ripard
2020-12-15 11:02 ` Dave Stevenson
2020-12-10 14:23 ` [PATCH v6 6/9] drm/vc4: hdmi: Store pixel frequency in the " Maxime Ripard
2020-12-10 14:23 ` [PATCH v6 7/9] drm/vc4: hdmi: Use the connector state pixel rate for the PHY Maxime Ripard
2020-12-10 14:23 ` [PATCH v6 8/9] drm/vc4: hdmi: Limit the BCM2711 to the max without scrambling Maxime Ripard
2020-12-10 14:23 ` [PATCH v6 9/9] drm/vc4: hdmi: Enable 10/12 bpc output Maxime Ripard
2020-12-15 11:04 ` Dave Stevenson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201210142329.10640-6-maxime@cerno.tech \
--to=maxime@cerno.tech \
--cc=airlied@linux.ie \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=daniel.vetter@intel.com \
--cc=dave.stevenson@raspberrypi.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=eric@anholt.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).