From: Kishon Vijay Abraham I <kishon@ti.com>
To: Kishon Vijay Abraham I <kishon@ti.com>,
Tom Joseph <tjoseph@cadence.com>, Rob Herring <robh@kernel.org>,
Bjorn Helgaas <bhelgaas@google.com>,
Nadeem Athani <nadeem@cadence.com>
Cc: mparab@cadence.com, pthombar@cadence.com,
linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
sjakhade@cadence.com, linux-omap@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5] PCI: cadence: Retrain Link to work around Gen2 training defect.
Date: Tue, 15 Dec 2020 12:30:09 +0530 [thread overview]
Message-ID: <20201215070009.27937-1-kishon@ti.com> (raw)
From: Nadeem Athani <nadeem@cadence.com>
Cadence controller will not initiate autonomous speed change if strapped as
Gen2. The Retrain Link bit is set as quirk to enable this speed change.
Signed-off-by: Nadeem Athani <nadeem@cadence.com>
[kishon@ti.com: Enable the workaround for TI's J721E SoC]
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
Hi Lorenzo,
The previous version of the patch can be found at [1].
I slightly re-worked the patch from Nadeem
*) Removed additional Link Up Check
*) Removed quirk from pcie-cadence-plat.c
*) Also removed additional compatible
"cdns,cdns-pcie-host-quirk-retrain" added in that series
*) Enabled the quirk for J721E
[1] -> http://lore.kernel.org/r/20201211144236.3825-1-nadeem@cadence.com
drivers/pci/controller/cadence/pci-j721e.c | 3 +
.../controller/cadence/pcie-cadence-host.c | 67 ++++++++++++++-----
drivers/pci/controller/cadence/pcie-cadence.h | 11 ++-
3 files changed, 62 insertions(+), 19 deletions(-)
diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
index dac1ac8a7615..baf729850cb1 100644
--- a/drivers/pci/controller/cadence/pci-j721e.c
+++ b/drivers/pci/controller/cadence/pci-j721e.c
@@ -64,6 +64,7 @@ enum j721e_pcie_mode {
struct j721e_pcie_data {
enum j721e_pcie_mode mode;
+ bool quirk_retrain_flag;
};
static inline u32 j721e_pcie_user_readl(struct j721e_pcie *pcie, u32 offset)
@@ -280,6 +281,7 @@ static struct pci_ops cdns_ti_pcie_host_ops = {
static const struct j721e_pcie_data j721e_pcie_rc_data = {
.mode = PCI_MODE_RC,
+ .quirk_retrain_flag = true,
};
static const struct j721e_pcie_data j721e_pcie_ep_data = {
@@ -388,6 +390,7 @@ static int j721e_pcie_probe(struct platform_device *pdev)
bridge->ops = &cdns_ti_pcie_host_ops;
rc = pci_host_bridge_priv(bridge);
+ rc->quirk_retrain_flag = data->quirk_retrain_flag;
cdns_pcie = &rc->pcie;
cdns_pcie->dev = dev;
diff --git a/drivers/pci/controller/cadence/pcie-cadence-host.c b/drivers/pci/controller/cadence/pcie-cadence-host.c
index 811c1cb2e8de..773c0d1137ed 100644
--- a/drivers/pci/controller/cadence/pcie-cadence-host.c
+++ b/drivers/pci/controller/cadence/pcie-cadence-host.c
@@ -77,6 +77,50 @@ static struct pci_ops cdns_pcie_host_ops = {
.write = pci_generic_config_write,
};
+static int cdns_pcie_host_wait_for_link(struct cdns_pcie *pcie)
+{
+ struct device *dev = pcie->dev;
+ int retries;
+
+ /* Check if the link is up or not */
+ for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
+ if (cdns_pcie_link_up(pcie)) {
+ dev_info(dev, "Link up\n");
+ return 0;
+ }
+ usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX);
+ }
+
+ return -ETIMEDOUT;
+}
+
+static void cdns_pcie_retrain(struct cdns_pcie *pcie)
+{
+ u32 lnk_cap_sls, pcie_cap_off = CDNS_PCIE_RP_CAP_OFFSET;
+ u16 lnk_stat, lnk_ctl;
+
+ /*
+ * Set retrain bit if current speed is 2.5 GB/s,
+ * but the PCIe root port support is > 2.5 GB/s.
+ */
+
+ lnk_cap_sls = cdns_pcie_readl(pcie, (CDNS_PCIE_RP_BASE + pcie_cap_off +
+ PCI_EXP_LNKCAP));
+ if ((lnk_cap_sls & PCI_EXP_LNKCAP_SLS) <= PCI_EXP_LNKCAP_SLS_2_5GB)
+ return;
+
+ lnk_stat = cdns_pcie_rp_readw(pcie, pcie_cap_off + PCI_EXP_LNKSTA);
+ if ((lnk_stat & PCI_EXP_LNKSTA_CLS) == PCI_EXP_LNKSTA_CLS_2_5GB) {
+ lnk_ctl = cdns_pcie_rp_readw(pcie,
+ pcie_cap_off + PCI_EXP_LNKCTL);
+ lnk_ctl |= PCI_EXP_LNKCTL_RL;
+ cdns_pcie_rp_writew(pcie, pcie_cap_off + PCI_EXP_LNKCTL,
+ lnk_ctl);
+
+ if (cdns_pcie_host_wait_for_link(pcie))
+ return;
+ }
+}
static int cdns_pcie_host_init_root_port(struct cdns_pcie_rc *rc)
{
@@ -398,23 +442,6 @@ static int cdns_pcie_host_init(struct device *dev,
return cdns_pcie_host_init_address_translation(rc);
}
-static int cdns_pcie_host_wait_for_link(struct cdns_pcie *pcie)
-{
- struct device *dev = pcie->dev;
- int retries;
-
- /* Check if the link is up or not */
- for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
- if (cdns_pcie_link_up(pcie)) {
- dev_info(dev, "Link up\n");
- return 0;
- }
- usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX);
- }
-
- return -ETIMEDOUT;
-}
-
int cdns_pcie_host_setup(struct cdns_pcie_rc *rc)
{
struct device *dev = rc->pcie.dev;
@@ -458,8 +485,12 @@ int cdns_pcie_host_setup(struct cdns_pcie_rc *rc)
}
ret = cdns_pcie_host_wait_for_link(pcie);
- if (ret)
+ if (ret) {
dev_dbg(dev, "PCIe link never came up\n");
+ } else {
+ if (rc->quirk_retrain_flag)
+ cdns_pcie_retrain(pcie);
+ }
for (bar = RP_BAR0; bar <= RP_NO_BAR; bar++)
rc->avail_ib_bar[bar] = true;
diff --git a/drivers/pci/controller/cadence/pcie-cadence.h b/drivers/pci/controller/cadence/pcie-cadence.h
index 30eba6cafe2c..0f29128a5d0a 100644
--- a/drivers/pci/controller/cadence/pcie-cadence.h
+++ b/drivers/pci/controller/cadence/pcie-cadence.h
@@ -119,7 +119,7 @@
* Root Port Registers (PCI configuration space for the root port function)
*/
#define CDNS_PCIE_RP_BASE 0x00200000
-
+#define CDNS_PCIE_RP_CAP_OFFSET 0xc0
/*
* Address Translation Registers
@@ -291,6 +291,7 @@ struct cdns_pcie {
* @device_id: PCI device ID
* @avail_ib_bar: Satus of RP_BAR0, RP_BAR1 and RP_NO_BAR if it's free or
* available
+ * @quirk_retrain_flag: Retrain link as quirk for PCIe Gen2
*/
struct cdns_pcie_rc {
struct cdns_pcie pcie;
@@ -299,6 +300,7 @@ struct cdns_pcie_rc {
u32 vendor_id;
u32 device_id;
bool avail_ib_bar[CDNS_PCIE_RP_MAX_IB];
+ bool quirk_retrain_flag;
};
/**
@@ -414,6 +416,13 @@ static inline void cdns_pcie_rp_writew(struct cdns_pcie *pcie,
cdns_pcie_write_sz(addr, 0x2, value);
}
+static inline u16 cdns_pcie_rp_readw(struct cdns_pcie *pcie, u32 reg)
+{
+ void __iomem *addr = pcie->reg_base + CDNS_PCIE_RP_BASE + reg;
+
+ return cdns_pcie_read_sz(addr, 0x2);
+}
+
/* Endpoint Function register access */
static inline void cdns_pcie_ep_fn_writeb(struct cdns_pcie *pcie, u8 fn,
u32 reg, u8 value)
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2020-12-15 7:01 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-15 7:00 Kishon Vijay Abraham I [this message]
2020-12-15 15:53 ` [PATCH v5] PCI: cadence: Retrain Link to work around Gen2 training defect Rob Herring
2020-12-16 15:01 ` Kishon Vijay Abraham I
2020-12-16 17:01 ` Rob Herring
2020-12-18 14:42 ` Kishon Vijay Abraham I
2020-12-18 17:31 ` Rob Herring
2020-12-15 23:30 ` Bjorn Helgaas
2020-12-21 9:55 ` Athani Nadeem Ladkhan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201215070009.27937-1-kishon@ti.com \
--to=kishon@ti.com \
--cc=bhelgaas@google.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=mparab@cadence.com \
--cc=nadeem@cadence.com \
--cc=pthombar@cadence.com \
--cc=robh@kernel.org \
--cc=sjakhade@cadence.com \
--cc=tjoseph@cadence.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox