From: Jagan Teki <jagan@amarulasolutions.com>
To: Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@st.com>,
Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org, Matteo Lisi <matteo.lisi@engicam.com>,
Francesco Utel <francesco.utel@engicam.com>,
linux-kernel@vger.kernel.org,
Jagan Teki <jagan@amarulasolutions.com>,
Mirko Ardinghi <mirko.ardinghi@engicam.com>,
linux-amarula@amarulasolutions.com,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/5] ARM: dts: stm32: Add Engicam MicroGEA STM32MP1 SoM
Date: Thu, 24 Dec 2020 00:43:59 +0530 [thread overview]
Message-ID: <20201223191402.378560-3-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20201223191402.378560-1-jagan@amarulasolutions.com>
MicroGEA STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam.
General features:
- STM32MP157AAC
- Up to 1GB DDR3L-800
- 512MB Nand flash
- I2S
MicroGEA STM32MP1 needs to mount on top of Engicam MicroDev carrier
boards for creating complete platform solutions.
Add support for it.
Signed-off-by: Matteo Lisi <matteo.lisi@engicam.com>
Signed-off-by: Francesco Utel <francesco.utel@engicam.com>
Signed-off-by: Mirko Ardinghi <mirko.ardinghi@engicam.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
.../dts/stm32mp157a-microgea-stm32mp1.dtsi | 147 ++++++++++++++++++
1 file changed, 147 insertions(+)
create mode 100644 arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi
diff --git a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi
new file mode 100644
index 000000000000..97d569107bfe
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) STMicroelectronics 2019 - All Rights Reserved
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutons(India)
+ */
+
+/ {
+ compatible = "engicam,microgea-stm32mp1", "st,stm32mp157";
+
+ memory@c0000000 {
+ reg = <0xc0000000 0x10000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ mcuram2: mcuram2@10000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10000000 0x40000>;
+ no-map;
+ };
+
+ vdev0vring0: vdev0vring0@10040000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10040000 0x1000>;
+ no-map;
+ };
+
+ vdev0vring1: vdev0vring1@10041000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10041000 0x1000>;
+ no-map;
+ };
+
+ vdev0buffer: vdev0buffer@10042000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10042000 0x4000>;
+ no-map;
+ };
+
+ mcuram: mcuram@30000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x30000000 0x40000>;
+ no-map;
+ };
+
+ retram: retram@38000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x38000000 0x10000>;
+ no-map;
+ };
+ };
+
+ vin: regulator-vin {
+ compatible = "regulator-fixed";
+ regulator-name = "vin";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ vddcore: regulator-vddcore {
+ compatible = "regulator-fixed";
+ regulator-name = "vddcore";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ vin-supply = <&vin>;
+ };
+
+ vdd: regulator-vdd {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ vin-supply = <&vin>;
+ };
+
+ vddq_ddr: regulator-vddq-ddr {
+ compatible = "regulator-fixed";
+ regulator-name = "vddq_ddr";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ vin-supply = <&vin>;
+ };
+};
+
+&dts {
+ status = "okay";
+};
+
+&fmc {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&fmc_pins_a>;
+ pinctrl-1 = <&fmc_sleep_pins_a>;
+ status = "okay";
+
+ nand-controller@4,0 {
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+ nand-on-flash-bbt;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+ };
+};
+
+&ipcc {
+ status = "okay";
+};
+
+&iwdg2{
+ timeout-sec = <32>;
+ status = "okay";
+};
+
+&m4_rproc{
+ memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
+ <&vdev0vring1>, <&vdev0buffer>;
+ mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
+ mbox-names = "vq0", "vq1", "shutdown";
+ interrupt-parent = <&exti>;
+ interrupts = <68 1>;
+ status = "okay";
+};
+
+&rng1 {
+ status = "okay";
+};
+
+&rtc{
+ status = "okay";
+};
+
+&vrefbuf {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ vdda-supply = <&vdd>;
+ status = "okay";
+};
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-12-23 19:17 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-23 19:13 [PATCH 0/5] ARM: dts: stm32: Add Engicam MicroGEA STM32MP1 Jagan Teki
2020-12-23 19:13 ` [PATCH 1/5] dt-bindings: arm: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 Jagan Teki
2020-12-23 19:13 ` Jagan Teki [this message]
2021-01-25 15:05 ` [PATCH 2/5] ARM: dts: stm32: Add Engicam MicroGEA STM32MP1 SoM Alexandre TORGUE
2021-01-25 15:07 ` Alexandre Torgue
2021-02-24 18:05 ` Jagan Teki
2021-02-26 15:09 ` Alexandre TORGUE
2021-02-26 15:10 ` Jagan Teki
2020-12-23 19:14 ` [PATCH 3/5] ARM: dts: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 board Jagan Teki
2020-12-23 19:14 ` [PATCH 4/5] dt-bindings: arm: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 7" OF Jagan Teki
2021-01-08 2:41 ` Rob Herring
2020-12-23 19:14 ` [PATCH 5/5] ARM: dts: " Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201223191402.378560-3-jagan@amarulasolutions.com \
--to=jagan@amarulasolutions.com \
--cc=alexandre.torgue@st.com \
--cc=devicetree@vger.kernel.org \
--cc=francesco.utel@engicam.com \
--cc=linux-amarula@amarulasolutions.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=matteo.lisi@engicam.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=mirko.ardinghi@engicam.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).