[PATCH v10 0/7] soc: mediatek: SVS: introduce MTK SVS engine

From: Roger Lu <roger.lu@mediatek.com>
To: Matthias Brugger <matthias.bgg@gmail.com>,
	Enric Balletbo Serra <eballetbo@gmail.com>,
	Kevin Hilman <khilman@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Nicolas Boichat <drinkcat@google.com>,
	Stephen Boyd <sboyd@kernel.org>,
	Philipp Zabel <p.zabel@pengutronix.de>
Cc: Mark Rutland <mark.rutland@arm.com>, Nishanth Menon <nm@ti.com>,
	Angus Lin <Angus.Lin@mediatek.com>,
	devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
	Roger Lu <roger.lu@mediatek.com>,
	linux-kernel@vger.kernel.org,
	Xiaoqing Liu <Xiaoqing.Liu@mediatek.com>,
	YT Lee <yt.lee@mediatek.com>, Fan Chen <fan.chen@mediatek.com>,
	linux-mediatek@lists.infradead.org,
	HenryC Chen <HenryC.Chen@mediatek.com>,
	Charles Yang <Charles.Yang@mediatek.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v10 0/7] soc: mediatek: SVS: introduce MTK SVS engine
Date: Sun, 27 Dec 2020 18:54:42 +0800	[thread overview]
Message-ID: <20201227105449.11452-1-roger.lu@mediatek.com> (raw)

1. SVS driver uses OPP adjust event in [1] to update OPP table voltage part.
2. SVS driver gets thermal/GPU device by node [2][3] and do device_link_add()
to make sure probe/suspend callback priority.
3. SVS driver gets CPU device by get_cpu_device() and do device_link_add()
to make sure probe/suspend callback priority.
3. SVS dts refers to reset controller [4] to help reset SVS HW.

#mt8183 SVS related patches
[1] https://patchwork.kernel.org/patch/11193513/
[2] https://patchwork.kernel.org/project/linux-mediatek/patch/20201013102358.22588-2-michael.kao@mediatek.com/
[3] https://patchwork.kernel.org/project/linux-mediatek/patch/20200306041345.259332-3-drinkcat@chromium.org/

#mt8192 SVS related patches
[1] https://patchwork.kernel.org/patch/11193513/
[2] https://patchwork.kernel.org/project/linux-mediatek/patch/20201223074944.2061-1-michael.kao@mediatek.com/
[3] https://lore.kernel.org/patchwork/patch/1356662/
[4] https://patchwork.kernel.org/project/linux-mediatek/patch/20200817030324.5690-5-crystal.guo@mediatek.com/

changes since v9:
- Since MTK SVS is SoC specific driver that doesn't share any code,
move it into Soc specific directory like these.
- Remove unnecessary SVS header file.
- Add mt8192 SVS driver.
- Change linux license to GPL-2.0-only.
- Squash "struct mtk_svs" members into "struct svs_platform"
and remove "struct mtk_svs".

Roger Lu (7):
  [v10,1/7]: dt-bindings: soc: mediatek: add mtk svs dt-bindings
  [v10,2/7]: arm64: dts: mt8183: add svs device information
  [v10,3/7]: soc: mediatek: SVS: introduce MTK SVS engine
  [v10,4/7]: soc: mediatek: SVS: add debug commands
  [v10,5/7]: dt-bindings: soc: mediatek: add mt8192 svs dt-bindings
  [v10,6/7]: arm64: dts: mt8192: add svs device information
  [v10,7/7]: soc: mediatek: SVS: add mt8192 SVS GPU driver

 .../bindings/soc/mediatek/mtk-svs.yaml        |  101 +
 arch/arm64/boot/dts/mediatek/mt8183.dtsi      |   20 +
 arch/arm64/boot/dts/mediatek/mt8192.dtsi      |   34 +
 drivers/soc/mediatek/Kconfig                  |   10 +
 drivers/soc/mediatek/Makefile                 |    1 +
 drivers/soc/mediatek/mtk-svs.c                | 2554 +++++++++++++++++
 6 files changed, 2720 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml
 create mode 100644 drivers/soc/mediatek/mtk-svs.c

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel