From: Marty Jones <mj8263788@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Subject: [PATCH] rockchip: rk3328: Add support for FriendlyARM NanoPi NEO3
Date: Mon, 28 Dec 2020 14:04:24 -0500 [thread overview]
Message-ID: <20201228140424.2b5d71d6@marty-x570> (raw)
From 7fc1fbf4d223ddf911f04adc756e41683cbd2948 Mon Sep 17 00:00:00 2001
From: Marty Jones <mj8263788@gmail.com>
Date: Mon, 28 Dec 2020 13:01:28 -0500
Subject: [PATCH] rockchip: rk3328: add support for FriendlyARM NanoPi NEO3
This patch adds support for FriendlyARM NanoPi NEO3
Soc: RockChip RK3328
RAM: 1GB/2GB DDR4
LAN: 10/100/1000M Ethernet with unique MAC
USB Host: 1x USB3.0 Type A and 2x USB2.0 on 2.54mm pin header
MicroSD: x 1 for system boot and storage
LED: Power LED x 1, System LED x 1
Key: User Button x 1
Fan: 2 Pin JST ZH 1.5mm Connector for 5V Fan
GPIO: 26 pin-header, include I2C, UART, SPI, I2S, GPIO
Power: 5V/1A, via Type-C or GPIO
Signed-off-by: Marty Jones <mj8263788@gmail.com>
---
arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../boot/dts/rockchip/rk3328-nanopi-neo3.dts | 35 +++++++++++++++++++
2 files changed, 36 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3328-nanopi-neo3.dts
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 1ab55a124a87..e2d8dcac7592 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -9,6 +9,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a95x-z2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-neo3.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-neo3.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-neo3.dts
new file mode 100644
index 000000000000..b62b169bdb2e
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-neo3.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Marty Jones <mj8263788@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3328-nanopi-r2s.dts"
+
+/ {
+ model = "FriendlyElec NanoPi NEO3";
+ compatible = "friendlyarm,nanopi-neo3", "rockchip,rk3328";
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>;
+ pinctrl-names = "default";
+
+ lan_led: led-0 {
+ gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
+ label = "nanopi-neo3:green:lan";
+ status = "disabled";
+ };
+
+ sys_led: led-1 {
+ gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+ label = "nanopi-neo3:green:sys";
+ };
+
+ wan_led: led-2 {
+ gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>;
+ label = "nanopi-neo3:green:wan";
+ status = "disabled";
+ };
+ };
+};
--
2.27.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
reply other threads:[~2020-12-28 19:05 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201228140424.2b5d71d6@marty-x570 \
--to=mj8263788@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-rockchip@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox