linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Ard Biesheuvel <ardb@kernel.org>
To: linux-crypto@vger.kernel.org
Cc: ebiggers@kernel.org, arnd@arndb.de, herbert@gondor.apana.org.au,
	linux-arm-kernel@lists.infradead.org,
	Ard Biesheuvel <ardb@kernel.org>
Subject: [PATCH v2] crypto: reduce minimum alignment of on-stack structures
Date: Fri,  8 Jan 2021 18:17:06 +0100	[thread overview]
Message-ID: <20210108171706.10306-1-ardb@kernel.org> (raw)

Unlike many other structure types defined in the crypto API, the
'shash_desc' structure is permitted to live on the stack, which
implies its contents may not be accessed by DMA masters. (This is
due to the fact that the stack may be located in the vmalloc area,
which requires a different virtual-to-physical translation than the
one implemented by the DMA subsystem)

Our definition of CRYPTO_MINALIGN_ATTR is based on ARCH_KMALLOC_MINALIGN,
which may take DMA constraints into account on architectures that support
non-cache coherent DMA such as ARM and arm64. In this case, the value is
chosen to reflect the largest cacheline size in the system, in order to
ensure that explicit cache maintenance as required by non-coherent DMA
masters does not affect adjacent, unrelated slab allocations. On arm64,
this value is currently set at 128 bytes.

This means that applying CRYPTO_MINALIGN_ATTR to struct shash_desc is both
unnecessary (as it is never used for DMA), and undesirable, given that it
wastes stack space (on arm64, performing the alignment costs 112 bytes in
the worst case, and the hole between the 'tfm' and '__ctx' members takes
up another 120 bytes, resulting in an increased stack footprint of up to
232 bytes.) So instead, let's switch to the minimum SLAB alignment, which
does not take DMA constraints into account.

By the same reasoning, we can reduce the alignment of the skcipher_request
structure when it lives on the stack. Note that in this case, we cannot
reduce the alignment of the __ctx[] struct member, because the structure
type is shared between synchronous and asynchronous users. However, there
is no need to apply CRYPTO_MINALIGN_ATTR to SYNC_SKCIPHER_REQUEST_ON_STACK
so let's use ARCH_SLAB_MINALIGN here as well.

Also, document the DMA aspect of this in the comment that explains the
purpose of CRYPTO_MINALIGN_ATTR.

Note that this is a no-op for x86.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
---
v2: - reduce alignment for SYNC_SKCIPHER_REQUEST_ON_STACK as well
    - update CRYPTO_MINALIGN_ATTR comment with DMA requirements.

 include/crypto/hash.h     | 8 ++++----
 include/crypto/skcipher.h | 2 +-
 include/linux/crypto.h    | 9 ++++++---
 3 files changed, 11 insertions(+), 8 deletions(-)

diff --git a/include/crypto/hash.h b/include/crypto/hash.h
index af2ff31ff619..13f8a6a54ca8 100644
--- a/include/crypto/hash.h
+++ b/include/crypto/hash.h
@@ -149,7 +149,7 @@ struct ahash_alg {
 
 struct shash_desc {
 	struct crypto_shash *tfm;
-	void *__ctx[] CRYPTO_MINALIGN_ATTR;
+	void *__ctx[] __aligned(ARCH_SLAB_MINALIGN);
 };
 
 #define HASH_MAX_DIGESTSIZE	 64
@@ -162,9 +162,9 @@ struct shash_desc {
 
 #define HASH_MAX_STATESIZE	512
 
-#define SHASH_DESC_ON_STACK(shash, ctx)				  \
-	char __##shash##_desc[sizeof(struct shash_desc) +	  \
-		HASH_MAX_DESCSIZE] CRYPTO_MINALIGN_ATTR; \
+#define SHASH_DESC_ON_STACK(shash, ctx)					     \
+	char __##shash##_desc[sizeof(struct shash_desc) + HASH_MAX_DESCSIZE] \
+		__aligned(__alignof__(struct shash_desc));		     \
 	struct shash_desc *shash = (struct shash_desc *)__##shash##_desc
 
 /**
diff --git a/include/crypto/skcipher.h b/include/crypto/skcipher.h
index 6a733b171a5d..aa133dc3bf39 100644
--- a/include/crypto/skcipher.h
+++ b/include/crypto/skcipher.h
@@ -128,7 +128,7 @@ struct skcipher_alg {
 			     MAX_SYNC_SKCIPHER_REQSIZE + \
 			     (!(sizeof((struct crypto_sync_skcipher *)1 == \
 				       (typeof(tfm))1))) \
-			    ] CRYPTO_MINALIGN_ATTR; \
+			    ] __aligned(ARCH_SLAB_MINALIGN); \
 	struct skcipher_request *name = (void *)__##name##_desc
 
 /**
diff --git a/include/linux/crypto.h b/include/linux/crypto.h
index 9b55cd6b1f1b..aec33c95f9c3 100644
--- a/include/linux/crypto.h
+++ b/include/linux/crypto.h
@@ -151,9 +151,12 @@
  * The macro CRYPTO_MINALIGN_ATTR (along with the void * type in the actual
  * declaration) is used to ensure that the crypto_tfm context structure is
  * aligned correctly for the given architecture so that there are no alignment
- * faults for C data types.  In particular, this is required on platforms such
- * as arm where pointers are 32-bit aligned but there are data types such as
- * u64 which require 64-bit alignment.
+ * faults for C data types.  On architectures that support non-cache coherent
+ * DMA, such as ARM or arm64, it also takes into account the minimal alignment
+ * that is required to ensure that the context struct member does not share any
+ * cachelines with the rest of the struct. This is needed to ensure that cache
+ * maintenance for non-coherent DMA does not affect data that may be accessed
+ * by the CPU concurrently.
  */
 #define CRYPTO_MINALIGN ARCH_KMALLOC_MINALIGN
 
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2021-01-08 17:20 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-08 17:17 Ard Biesheuvel [this message]
2021-01-08 21:16 ` [PATCH v2] crypto: reduce minimum alignment of on-stack structures Eric Biggers
2021-01-08 22:49   ` Ard Biesheuvel
2021-01-13  6:26     ` Herbert Xu
2021-01-13  8:18       ` Ard Biesheuvel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210108171706.10306-1-ardb@kernel.org \
    --to=ardb@kernel.org \
    --cc=arnd@arndb.de \
    --cc=ebiggers@kernel.org \
    --cc=herbert@gondor.apana.org.au \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-crypto@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).