* [PATCH AUTOSEL 5.10 05/51] ARM: omap2: pmic-cpcap: fix maximum voltage to be consistent with defaults on xt875
[not found] <20210112125534.70280-1-sashal@kernel.org>
@ 2021-01-12 12:54 ` Sasha Levin
2021-01-12 12:54 ` [PATCH AUTOSEL 5.10 15/51] ARM: dts: ux500/golden: Set display max brightness Sasha Levin
` (3 subsequent siblings)
4 siblings, 0 replies; 5+ messages in thread
From: Sasha Levin @ 2021-01-12 12:54 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Carl Philipp Klemm, Tony Lindgren, linux-omap, linux-arm-kernel,
Sasha Levin
From: Carl Philipp Klemm <philipp@uvos.xyz>
[ Upstream commit c0bc969c176b10598b31d5d1a5edf9a5261f0a9f ]
xt875 comes up with a iva voltage of 1375000 and android runs at this too. fix
maximum voltage to be consistent with this.
Signed-off-by: Carl Philipp Klemm <philipp@uvos.xyz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/mach-omap2/pmic-cpcap.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/mach-omap2/pmic-cpcap.c b/arch/arm/mach-omap2/pmic-cpcap.c
index eab281a5fc9f7..09076ad0576d9 100644
--- a/arch/arm/mach-omap2/pmic-cpcap.c
+++ b/arch/arm/mach-omap2/pmic-cpcap.c
@@ -71,7 +71,7 @@ static struct omap_voltdm_pmic omap_cpcap_iva = {
.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
.vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX,
.vddmin = 900000,
- .vddmax = 1350000,
+ .vddmax = 1375000,
.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = 0x44,
.volt_reg_addr = 0x0,
--
2.27.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH AUTOSEL 5.10 15/51] ARM: dts: ux500/golden: Set display max brightness
[not found] <20210112125534.70280-1-sashal@kernel.org>
2021-01-12 12:54 ` [PATCH AUTOSEL 5.10 05/51] ARM: omap2: pmic-cpcap: fix maximum voltage to be consistent with defaults on xt875 Sasha Levin
@ 2021-01-12 12:54 ` Sasha Levin
2021-01-12 12:54 ` [PATCH AUTOSEL 5.10 17/51] stmmac: intel: Add PCI IDs for TGL-H platform Sasha Levin
` (2 subsequent siblings)
4 siblings, 0 replies; 5+ messages in thread
From: Sasha Levin @ 2021-01-12 12:54 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Sasha Levin, devicetree, Stephan Gerhold, Arnd Bergmann,
Linus Walleij, linux-arm-kernel
From: Linus Walleij <linus.walleij@linaro.org>
[ Upstream commit 7887cc89d5851cbdec49219e9614beec776af150 ]
A too high brightness by default (default is max) makes the
screen go blank. Set this to 15 as in the Vendor tree.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20201214223413.253893-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/ste-ux500-samsung-golden.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
index a1093cb37dc7a..aed1f2d5f2467 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
@@ -326,6 +326,7 @@ dsi-controller@a0351000 {
panel@0 {
compatible = "samsung,s6e63m0";
reg = <0>;
+ max-brightness = <15>;
vdd3-supply = <&panel_reg_3v0>;
vci-supply = <&panel_reg_1v8>;
reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
--
2.27.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH AUTOSEL 5.10 17/51] stmmac: intel: Add PCI IDs for TGL-H platform
[not found] <20210112125534.70280-1-sashal@kernel.org>
2021-01-12 12:54 ` [PATCH AUTOSEL 5.10 05/51] ARM: omap2: pmic-cpcap: fix maximum voltage to be consistent with defaults on xt875 Sasha Levin
2021-01-12 12:54 ` [PATCH AUTOSEL 5.10 15/51] ARM: dts: ux500/golden: Set display max brightness Sasha Levin
@ 2021-01-12 12:54 ` Sasha Levin
2021-01-12 12:55 ` [PATCH AUTOSEL 5.10 30/51] dmaengine: stm32-mdma: fix STM32_MDMA_VERY_HIGH_PRIORITY value Sasha Levin
2021-01-12 12:55 ` [PATCH AUTOSEL 5.10 50/51] ARM: picoxcell: fix missing interrupt-parent properties Sasha Levin
4 siblings, 0 replies; 5+ messages in thread
From: Sasha Levin @ 2021-01-12 12:54 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Sasha Levin, Voon Weifeng, Noor Azura Ahmad Tarmizi, netdev,
Jakub Kicinski, Muhammad Husaini Zulkifli, linux-stm32,
linux-arm-kernel
From: Noor Azura Ahmad Tarmizi <noor.azura.ahmad.tarmizi@intel.com>
[ Upstream commit 8450e23f142f629e40bd67afc8375c86c7fbf8f1 ]
Add TGL-H PCI info and PCI IDs for the new TSN Controller to the list
of supported devices.
Signed-off-by: Noor Azura Ahmad Tarmizi <noor.azura.ahmad.tarmizi@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Link: https://lore.kernel.org/r/20201222160337.30870-1-muhammad.husaini.zulkifli@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
index 81ee0a071b4e9..e5234bb02dafd 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
@@ -725,6 +725,8 @@ static SIMPLE_DEV_PM_OPS(intel_eth_pm_ops, intel_eth_pci_suspend,
#define PCI_DEVICE_ID_INTEL_EHL_PSE1_RGMII1G_ID 0x4bb0
#define PCI_DEVICE_ID_INTEL_EHL_PSE1_SGMII1G_ID 0x4bb1
#define PCI_DEVICE_ID_INTEL_EHL_PSE1_SGMII2G5_ID 0x4bb2
+#define PCI_DEVICE_ID_INTEL_TGLH_SGMII1G_0_ID 0x43ac
+#define PCI_DEVICE_ID_INTEL_TGLH_SGMII1G_1_ID 0x43a2
#define PCI_DEVICE_ID_INTEL_TGL_SGMII1G_ID 0xa0ac
static const struct pci_device_id intel_eth_pci_id_table[] = {
@@ -739,6 +741,8 @@ static const struct pci_device_id intel_eth_pci_id_table[] = {
{ PCI_DEVICE_DATA(INTEL, EHL_PSE1_SGMII1G_ID, &ehl_pse1_sgmii1g_info) },
{ PCI_DEVICE_DATA(INTEL, EHL_PSE1_SGMII2G5_ID, &ehl_pse1_sgmii1g_info) },
{ PCI_DEVICE_DATA(INTEL, TGL_SGMII1G_ID, &tgl_sgmii1g_info) },
+ { PCI_DEVICE_DATA(INTEL, TGLH_SGMII1G_0_ID, &tgl_sgmii1g_info) },
+ { PCI_DEVICE_DATA(INTEL, TGLH_SGMII1G_1_ID, &tgl_sgmii1g_info) },
{}
};
MODULE_DEVICE_TABLE(pci, intel_eth_pci_id_table);
--
2.27.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH AUTOSEL 5.10 30/51] dmaengine: stm32-mdma: fix STM32_MDMA_VERY_HIGH_PRIORITY value
[not found] <20210112125534.70280-1-sashal@kernel.org>
` (2 preceding siblings ...)
2021-01-12 12:54 ` [PATCH AUTOSEL 5.10 17/51] stmmac: intel: Add PCI IDs for TGL-H platform Sasha Levin
@ 2021-01-12 12:55 ` Sasha Levin
2021-01-12 12:55 ` [PATCH AUTOSEL 5.10 50/51] ARM: picoxcell: fix missing interrupt-parent properties Sasha Levin
4 siblings, 0 replies; 5+ messages in thread
From: Sasha Levin @ 2021-01-12 12:55 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Sasha Levin, Amelie Delaunay, Vinod Koul, dmaengine, linux-stm32,
linux-arm-kernel
From: Amelie Delaunay <amelie.delaunay@foss.st.com>
[ Upstream commit e1263f9277bad198c2acc8092a41aea1edbea0e4 ]
STM32_MDMA_VERY_HIGH_PRIORITY is b11 not 0x11, so fix it with 0x3.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20210104142045.25583-1-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/dma/stm32-mdma.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/dma/stm32-mdma.c b/drivers/dma/stm32-mdma.c
index 08cfbfab837bb..ca97cbe433651 100644
--- a/drivers/dma/stm32-mdma.c
+++ b/drivers/dma/stm32-mdma.c
@@ -199,7 +199,7 @@
#define STM32_MDMA_MAX_CHANNELS 63
#define STM32_MDMA_MAX_REQUESTS 256
#define STM32_MDMA_MAX_BURST 128
-#define STM32_MDMA_VERY_HIGH_PRIORITY 0x11
+#define STM32_MDMA_VERY_HIGH_PRIORITY 0x3
enum stm32_mdma_trigger_mode {
STM32_MDMA_BUFFER,
--
2.27.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH AUTOSEL 5.10 50/51] ARM: picoxcell: fix missing interrupt-parent properties
[not found] <20210112125534.70280-1-sashal@kernel.org>
` (3 preceding siblings ...)
2021-01-12 12:55 ` [PATCH AUTOSEL 5.10 30/51] dmaengine: stm32-mdma: fix STM32_MDMA_VERY_HIGH_PRIORITY value Sasha Levin
@ 2021-01-12 12:55 ` Sasha Levin
4 siblings, 0 replies; 5+ messages in thread
From: Sasha Levin @ 2021-01-12 12:55 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Sasha Levin, Jamie Iles, linux-arm-kernel, Arnd Bergmann,
devicetree
From: Arnd Bergmann <arnd@arndb.de>
[ Upstream commit bac717171971176b78c72d15a8b6961764ab197f ]
dtc points out that the interrupts for some devices are not parsable:
picoxcell-pc3x2.dtsi:45.19-49.5: Warning (interrupts_property): /paxi/gem@30000: Missing interrupt-parent
picoxcell-pc3x2.dtsi:51.21-55.5: Warning (interrupts_property): /paxi/dmac@40000: Missing interrupt-parent
picoxcell-pc3x2.dtsi:57.21-61.5: Warning (interrupts_property): /paxi/dmac@50000: Missing interrupt-parent
picoxcell-pc3x2.dtsi:233.21-237.5: Warning (interrupts_property): /rwid-axi/axi2pico@c0000000: Missing interrupt-parent
There are two VIC instances, so it's not clear which one needs to be
used. I found the BSP sources that reference VIC0, so use that:
https://github.com/r1mikey/meta-picoxcell/blob/master/recipes-kernel/linux/linux-picochip-3.0/0001-picoxcell-support-for-Picochip-picoXcell-SoC.patch
Acked-by: Jamie Iles <jamie@jamieiles.com>
Link: https://lore.kernel.org/r/20201230152010.3914962-1-arnd@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/picoxcell-pc3x2.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/picoxcell-pc3x2.dtsi b/arch/arm/boot/dts/picoxcell-pc3x2.dtsi
index c4c6c7e9e37b6..5898879a3038e 100644
--- a/arch/arm/boot/dts/picoxcell-pc3x2.dtsi
+++ b/arch/arm/boot/dts/picoxcell-pc3x2.dtsi
@@ -45,18 +45,21 @@ paxi {
emac: gem@30000 {
compatible = "cadence,gem";
reg = <0x30000 0x10000>;
+ interrupt-parent = <&vic0>;
interrupts = <31>;
};
dmac1: dmac@40000 {
compatible = "snps,dw-dmac";
reg = <0x40000 0x10000>;
+ interrupt-parent = <&vic0>;
interrupts = <25>;
};
dmac2: dmac@50000 {
compatible = "snps,dw-dmac";
reg = <0x50000 0x10000>;
+ interrupt-parent = <&vic0>;
interrupts = <26>;
};
@@ -233,6 +236,7 @@ ebi@50000000 {
axi2pico@c0000000 {
compatible = "picochip,axi2pico-pc3x2";
reg = <0xc0000000 0x10000>;
+ interrupt-parent = <&vic0>;
interrupts = <13 14 15 16 17 18 19 20 21>;
};
};
--
2.27.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 5+ messages in thread
end of thread, other threads:[~2021-01-12 12:59 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20210112125534.70280-1-sashal@kernel.org>
2021-01-12 12:54 ` [PATCH AUTOSEL 5.10 05/51] ARM: omap2: pmic-cpcap: fix maximum voltage to be consistent with defaults on xt875 Sasha Levin
2021-01-12 12:54 ` [PATCH AUTOSEL 5.10 15/51] ARM: dts: ux500/golden: Set display max brightness Sasha Levin
2021-01-12 12:54 ` [PATCH AUTOSEL 5.10 17/51] stmmac: intel: Add PCI IDs for TGL-H platform Sasha Levin
2021-01-12 12:55 ` [PATCH AUTOSEL 5.10 30/51] dmaengine: stm32-mdma: fix STM32_MDMA_VERY_HIGH_PRIORITY value Sasha Levin
2021-01-12 12:55 ` [PATCH AUTOSEL 5.10 50/51] ARM: picoxcell: fix missing interrupt-parent properties Sasha Levin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).