From: Vinod Koul <vkoul@kernel.org>
To: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Nishanth Menon <nm@ti.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Rob Herring <robh+dt@kernel.org>,
Swapnil Jakhade <sjakhade@cadence.com>,
Peter Rosin <peda@axentia.se>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 6/7] phy: ti: j721e-wiz: Enable reference clock output in cmn_refclk_<p/m>
Date: Wed, 13 Jan 2021 19:42:06 +0530 [thread overview]
Message-ID: <20210113141206.GQ2771@vkoul-mobl> (raw)
In-Reply-To: <20201224114250.1083-7-kishon@ti.com>
On 24-12-20, 17:12, Kishon Vijay Abraham I wrote:
> cmn_refclk_<p/m> lines in Torrent SERDES is used for connecting external
> reference clock. cmn_refclk_<p/m> can also be configured to output the
> reference clock. In order to drive the refclk out from the SERDES
> (Cadence Torrent), PHY_EN_REFCLK should be set in SERDES_RST of WIZ.
> Model PHY_EN_REFCLK as a clock, so that platforms like AM642 EVM can
> enable it.
>
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
> drivers/phy/ti/phy-j721e-wiz.c | 115 +++++++++++++++++++++++++++++++++
> 1 file changed, 115 insertions(+)
>
> diff --git a/drivers/phy/ti/phy-j721e-wiz.c b/drivers/phy/ti/phy-j721e-wiz.c
> index 08acfab1ebe6..d60a9a01a8b2 100644
> --- a/drivers/phy/ti/phy-j721e-wiz.c
> +++ b/drivers/phy/ti/phy-j721e-wiz.c
> @@ -54,6 +54,7 @@ enum wiz_refclk_div_sel {
>
> static const struct reg_field por_en = REG_FIELD(WIZ_SERDES_CTRL, 31, 31);
> static const struct reg_field phy_reset_n = REG_FIELD(WIZ_SERDES_RST, 31, 31);
> +static const struct reg_field phy_en_refclk = REG_FIELD(WIZ_SERDES_RST, 30, 30);
> static const struct reg_field pll1_refclk_mux_sel =
> REG_FIELD(WIZ_SERDES_RST, 29, 29);
> static const struct reg_field pll0_refclk_mux_sel =
> @@ -141,6 +142,15 @@ struct wiz_clk_div_sel {
> const char *node_name;
> };
>
> +struct wiz_phy_en_refclk {
> + struct clk_hw hw;
> + struct regmap_field *phy_en_refclk;
> + struct clk_init_data clk_data;
> +};
> +
> +#define to_wiz_phy_en_refclk(_hw) \
> + container_of(_hw, struct wiz_phy_en_refclk, hw)
> +
> static struct wiz_clk_mux_sel clk_mux_sel_16g[] = {
> {
> /*
> @@ -214,6 +224,7 @@ struct wiz {
> unsigned int clk_div_sel_num;
> struct regmap_field *por_en;
> struct regmap_field *phy_reset_n;
> + struct regmap_field *phy_en_refclk;
> struct regmap_field *p_enable[WIZ_MAX_LANES];
> struct regmap_field *p_align[WIZ_MAX_LANES];
> struct regmap_field *p_raw_auto_start[WIZ_MAX_LANES];
> @@ -450,9 +461,96 @@ static int wiz_regfield_init(struct wiz *wiz)
> return PTR_ERR(wiz->typec_ln10_swap);
> }
>
> + wiz->phy_en_refclk = devm_regmap_field_alloc(dev, regmap,
> + phy_en_refclk);
> + if (IS_ERR(wiz->phy_en_refclk)) {
> + dev_err(dev, "PHY_EN_REFCLK reg field init failed\n");
> + return PTR_ERR(wiz->phy_en_refclk);
> + }
> +
> return 0;
> }
>
> +static int wiz_phy_en_refclk_enable(struct clk_hw *hw)
> +{
> + struct wiz_phy_en_refclk *wiz_phy_en_refclk = to_wiz_phy_en_refclk(hw);
> + struct regmap_field *phy_en_refclk = wiz_phy_en_refclk->phy_en_refclk;
> +
> + regmap_field_write(phy_en_refclk, 1);
> +
> + return 0;
> +}
> +
> +static void wiz_phy_en_refclk_disable(struct clk_hw *hw)
> +{
> + struct wiz_phy_en_refclk *wiz_phy_en_refclk = to_wiz_phy_en_refclk(hw);
> + struct regmap_field *phy_en_refclk = wiz_phy_en_refclk->phy_en_refclk;
> +
> + regmap_field_write(phy_en_refclk, 0);
> +}
> +
> +static int wiz_phy_en_refclk_is_enabled(struct clk_hw *hw)
> +{
> + struct wiz_phy_en_refclk *wiz_phy_en_refclk = to_wiz_phy_en_refclk(hw);
> + struct regmap_field *phy_en_refclk = wiz_phy_en_refclk->phy_en_refclk;
get_phy_wiz_regmap() macro for this repeated patter..?
> + int val;
> +
> + regmap_field_read(phy_en_refclk, &val);
> +
> + return !!val;
> +}
> +
> +static const struct clk_ops wiz_phy_en_refclk_ops = {
> + .enable = wiz_phy_en_refclk_enable,
> + .disable = wiz_phy_en_refclk_disable,
> + .is_enabled = wiz_phy_en_refclk_is_enabled,
> +};
> +
> +static int wiz_phy_en_refclk_register(struct wiz *wiz, struct device_node *node,
> + struct regmap_field *phy_en_refclk)
> +{
> + struct wiz_phy_en_refclk *wiz_phy_en_refclk;
> + struct device *dev = wiz->dev;
> + struct clk_init_data *init;
> + unsigned int num_parents;
> + const char *parent_name;
> + char clk_name[100];
> + struct clk *clk;
> + int ret;
> +
> + wiz_phy_en_refclk = devm_kzalloc(dev, sizeof(*wiz_phy_en_refclk),
> + GFP_KERNEL);
single line :)
> + if (!wiz_phy_en_refclk)
> + return -ENOMEM;
> +
> + num_parents = of_clk_get_parent_count(node);
> + parent_name = of_clk_get_parent_name(node, 0);
> +
> + snprintf(clk_name, sizeof(clk_name), "%s_%s", dev_name(dev),
> + node->name);
here too and few other places
> +
> + init = &wiz_phy_en_refclk->clk_data;
> +
> + init->ops = &wiz_phy_en_refclk_ops;
> + init->flags = 0;
> + init->parent_names = parent_name ? &parent_name : NULL;
> + init->num_parents = num_parents ? 1 : 0;
> + init->name = clk_name;
> +
> + wiz_phy_en_refclk->phy_en_refclk = phy_en_refclk;
> + wiz_phy_en_refclk->hw.init = init;
> +
> + clk = devm_clk_register(dev, &wiz_phy_en_refclk->hw);
> + if (IS_ERR(clk))
> + return PTR_ERR(clk);
> +
> + ret = of_clk_add_provider(node, of_clk_src_simple_get, clk);
> + if (ret)
> + dev_err(dev, "Fail to add clock provider: %s\n", clk_name);
> +
> + return ret;
> +}
> +
> static u8 wiz_clk_mux_get_parent(struct clk_hw *hw)
> {
> struct wiz_clk_mux *mux = to_wiz_clk_mux(hw);
> @@ -713,6 +811,20 @@ static int wiz_clock_init(struct wiz *wiz, struct device_node *node)
> of_node_put(clk_node);
> }
>
> + clk_node = of_get_child_by_name(node, "phy-en-refclk");
> + if (clk_node) {
> + ret = wiz_phy_en_refclk_register(wiz, clk_node,
> + wiz->phy_en_refclk);
> + if (ret) {
> + dev_err(dev, "Failed to register %s clock\n",
> + node_name);
> + of_node_put(clk_node);
> + goto err;
> + }
> +
> + of_node_put(clk_node);
> + }
> +
> return 0;
> err:
> wiz_clock_cleanup(wiz, node);
> @@ -828,6 +940,9 @@ static int wiz_get_lane_phy_types(struct device *dev, struct wiz *wiz)
> of_node_name_eq(subnode, "link")))
> continue;
>
> + if (!(of_node_name_eq(subnode, "link")))
> + continue;
> +
> ret = of_property_read_u32(subnode, "reg", ®);
> if (ret) {
> dev_err(dev,
> --
> 2.17.1
--
~Vinod
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-01-13 14:14 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-24 11:42 [PATCH 0/7] AM64: Add SERDES bindings and driver support Kishon Vijay Abraham I
2020-12-24 11:42 ` [PATCH 1/7] dt-bindings: phy: ti, phy-j721e-wiz: Add bindings for AM64 SERDES Wrapper Kishon Vijay Abraham I
2021-01-08 2:58 ` Rob Herring
2020-12-24 11:42 ` [PATCH 2/7] dt-bindings: phy: ti, phy-j721e-wiz: Add binding for phy_en_refclk Kishon Vijay Abraham I
2021-01-08 2:59 ` [PATCH 2/7] dt-bindings: phy: ti,phy-j721e-wiz: " Rob Herring
2020-12-24 11:42 ` [PATCH 3/7] dt-bindings: phy: cadence-torrent: Add binding for refclk driver Kishon Vijay Abraham I
2021-01-08 3:01 ` Rob Herring
2020-12-24 11:42 ` [PATCH 4/7] dt-bindings: ti-serdes-mux: Add defines for AM64 SoC Kishon Vijay Abraham I
2021-01-08 3:03 ` Rob Herring
2021-01-08 11:01 ` Kishon Vijay Abraham I
2021-01-08 10:46 ` Peter Rosin
2021-01-08 11:03 ` Kishon Vijay Abraham I
2020-12-24 11:42 ` [PATCH 5/7] phy: ti: j721e-wiz: Configure full rate divider for AM64 Kishon Vijay Abraham I
2021-01-13 14:04 ` Vinod Koul
2020-12-24 11:42 ` [PATCH 6/7] phy: ti: j721e-wiz: Enable reference clock output in cmn_refclk_<p/m> Kishon Vijay Abraham I
2021-01-13 14:12 ` Vinod Koul [this message]
2020-12-24 11:42 ` [PATCH 7/7] phy: cadence-torrent: Add support to drive refclk out Kishon Vijay Abraham I
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210113141206.GQ2771@vkoul-mobl \
--to=vkoul@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=peda@axentia.se \
--cc=robh+dt@kernel.org \
--cc=sjakhade@cadence.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox