From: Hermann.Lauer@uni-heidelberg.de
To: linux-arm-kernel@lists.infradead.org
Cc: wens@csie.org, jernej.skrabec@siol.net, mripard@kernel.org
Subject: ARM: dts: sun7i: a20: bananapro: Fix ethernet node
Date: Wed, 20 Jan 2021 12:40:26 +0100 [thread overview]
Message-ID: <20210120114026.GA3045@lemon.iwr.uni-heidelberg.de> (raw)
BananaPro 1GB works only reliable with the patch for M2 Ultra applied to
it's devicetree, too. Without this patch you will get high packet loss rates.
Tested-by: Hermann Lauer <Hermann.Lauer@uni-heidelberg.de>
From b3eec3212e66ece33f69be0de98d54e67834e798 Mon Sep 17 00:00:00 2001
From: Jernej Skrabec <jernej.skrabec@siol.net>
Date: Sun, 25 Oct 2020 09:19:49 +0100
Subject: ARM: dts: sun8i: r40: bananapi-m2-ultra: Fix ethernet node
Ethernet PHY on BananaPi M2 Ultra provides RX and TX delays. Fix
ethernet node to reflect that fact.
Fixes: c36fd5a48bd2 ("ARM: dts: sun8i: r40: bananapi-m2-ultra: Enable GMAC ethernet controller")
---
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/sun7i-a20-bananapro.dts
--- a/arch/arm/boot/dts/sun7i-a20-bananapro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts
@@ -110,7 +110,7 @@
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-supply = <®_gmac_3v3>;
status = "okay";
};
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-01-20 11:42 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-20 11:40 Hermann.Lauer [this message]
2021-01-20 23:48 ` ARM: dts: sun7i: a20: bananapro: Fix ethernet node Jernej Škrabec
-- strict thread matches above, loose matches on Subject: below --
2021-01-20 11:07 Hermann.Lauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210120114026.GA3045@lemon.iwr.uni-heidelberg.de \
--to=hermann.lauer@uni-heidelberg.de \
--cc=jernej.skrabec@siol.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=mripard@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox