[PATCH 0/2] thermal: remove obsolete drivers

[PATCH 0/2] thermal: remove obsolete drivers

[Arnd Bergmann]

From: Arnd Bergmann <arnd@arndb.de>

A few Arm platforms are getting removed in v5.12, this removes
the corresponding thermal drivers.

Link: https://lore.kernel.org/linux-arm-kernel/20210120124812.2800027-1-arnd@kernel.org/T/


Arnd Bergmann (2):
  thermal: remove tango driver
  thermal: remove zx driver

 .../bindings/thermal/tango-thermal.txt        |  17 --
 .../bindings/thermal/zx2967-thermal.txt       | 116 --------
 drivers/thermal/Kconfig                       |  17 --
 drivers/thermal/Makefile                      |   2 -
 drivers/thermal/tango_thermal.c               | 126 ---------
 drivers/thermal/zx2967_thermal.c              | 256 ------------------
 6 files changed, 534 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/thermal/tango-thermal.txt
 delete mode 100644 Documentation/devicetree/bindings/thermal/zx2967-thermal.txt
 delete mode 100644 drivers/thermal/tango_thermal.c
 delete mode 100644 drivers/thermal/zx2967_thermal.c

-- 
2.29.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 1/2] thermal: remove tango driver

[Arnd Bergmann]

From: Arnd Bergmann <arnd@arndb.de>

The tango platform is getting removed, so the driver is no
longer needed.

Cc: Marc Gonzalez <marc.w.gonzalez@free.fr>
Cc: Mans Rullgard <mans@mansr.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 .../bindings/thermal/tango-thermal.txt        |  17 ---
 drivers/thermal/Kconfig                       |   9 --
 drivers/thermal/Makefile                      |   1 -
 drivers/thermal/tango_thermal.c               | 126 ------------------
 4 files changed, 153 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/thermal/tango-thermal.txt
 delete mode 100644 drivers/thermal/tango_thermal.c

diff --git a/Documentation/devicetree/bindings/thermal/tango-thermal.txt b/Documentation/devicetree/bindings/thermal/tango-thermal.txt
deleted file mode 100644
index 2c918d742867..000000000000
--- a/Documentation/devicetree/bindings/thermal/tango-thermal.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-* Tango Thermal
-
-The SMP8758 SoC includes 3 instances of this temperature sensor
-(in the CPU, video decoder, and PCIe controller).
-
-Required properties:
-- #thermal-sensor-cells: Should be 0 (see Documentation/devicetree/bindings/thermal/thermal-sensor.yaml)
-- compatible: "sigma,smp8758-thermal"
-- reg: Address range of the thermal registers
-
-Example:
-
-	cpu_temp: thermal@920100 {
-		#thermal-sensor-cells = <0>;
-		compatible = "sigma,smp8758-thermal";
-		reg = <0x920100 12>;
-	};
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 7edc8dc6bbab..cf199574c096 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -450,15 +450,6 @@ depends on (ARCH_STI || ARCH_STM32) && OF
 source "drivers/thermal/st/Kconfig"
 endmenu
 
-config TANGO_THERMAL
-	tristate "Tango thermal management"
-	depends on ARCH_TANGO || COMPILE_TEST
-	help
-	  Enable the Tango thermal driver, which supports the primitive
-	  temperature sensor embedded in Tango chips since the SMP8758.
-	  This sensor only generates a 1-bit signal to indicate whether
-	  the die temperature exceeds a programmable threshold.
-
 source "drivers/thermal/tegra/Kconfig"
 
 config GENERIC_ADC_THERMAL
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index b64dd50a6629..a44dda2d03bc 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -42,7 +42,6 @@ obj-y				+= samsung/
 obj-$(CONFIG_DOVE_THERMAL)  	+= dove_thermal.o
 obj-$(CONFIG_DB8500_THERMAL)	+= db8500_thermal.o
 obj-$(CONFIG_ARMADA_THERMAL)	+= armada_thermal.o
-obj-$(CONFIG_TANGO_THERMAL)	+= tango_thermal.o
 obj-$(CONFIG_IMX_THERMAL)	+= imx_thermal.o
 obj-$(CONFIG_IMX_SC_THERMAL)	+= imx_sc_thermal.o
 obj-$(CONFIG_IMX8MM_THERMAL)	+= imx8mm_thermal.o
diff --git a/drivers/thermal/tango_thermal.c b/drivers/thermal/tango_thermal.c
deleted file mode 100644
index 304b461e12aa..000000000000
--- a/drivers/thermal/tango_thermal.c
+++ /dev/null
@@ -1,126 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/module.h>
-#include <linux/thermal.h>
-#include <linux/platform_device.h>
-
-/*
- * According to a data sheet draft, "this temperature sensor uses a bandgap
- * type of circuit to compare a voltage which has a negative temperature
- * coefficient with a voltage that is proportional to absolute temperature.
- * A resistor bank allows 41 different temperature thresholds to be selected
- * and the logic output will then indicate whether the actual die temperature
- * lies above or below the selected threshold."
- */
-
-#define TEMPSI_CMD	0
-#define TEMPSI_RES	4
-#define TEMPSI_CFG	8
-
-#define CMD_OFF		0
-#define CMD_ON		1
-#define CMD_READ	2
-
-#define IDX_MIN		15
-#define IDX_MAX		40
-
-struct tango_thermal_priv {
-	void __iomem *base;
-	int thresh_idx;
-};
-
-static bool temp_above_thresh(void __iomem *base, int thresh_idx)
-{
-	writel(CMD_READ | thresh_idx << 8, base + TEMPSI_CMD);
-	usleep_range(10, 20);
-	writel(CMD_READ | thresh_idx << 8, base + TEMPSI_CMD);
-
-	return readl(base + TEMPSI_RES);
-}
-
-static int tango_get_temp(void *arg, int *res)
-{
-	struct tango_thermal_priv *priv = arg;
-	int idx = priv->thresh_idx;
-
-	if (temp_above_thresh(priv->base, idx)) {
-		/* Search upward by incrementing thresh_idx */
-		while (idx < IDX_MAX && temp_above_thresh(priv->base, ++idx))
-			cpu_relax();
-		idx = idx - 1; /* always return lower bound */
-	} else {
-		/* Search downward by decrementing thresh_idx */
-		while (idx > IDX_MIN && !temp_above_thresh(priv->base, --idx))
-			cpu_relax();
-	}
-
-	*res = (idx * 9 / 2 - 38) * 1000; /* millidegrees Celsius */
-	priv->thresh_idx = idx;
-
-	return 0;
-}
-
-static const struct thermal_zone_of_device_ops ops = {
-	.get_temp	= tango_get_temp,
-};
-
-static void tango_thermal_init(struct tango_thermal_priv *priv)
-{
-	writel(0, priv->base + TEMPSI_CFG);
-	writel(CMD_ON, priv->base + TEMPSI_CMD);
-}
-
-static int tango_thermal_probe(struct platform_device *pdev)
-{
-	struct resource *res;
-	struct tango_thermal_priv *priv;
-	struct thermal_zone_device *tzdev;
-
-	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
-	if (!priv)
-		return -ENOMEM;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	priv->base = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(priv->base))
-		return PTR_ERR(priv->base);
-
-	platform_set_drvdata(pdev, priv);
-	priv->thresh_idx = IDX_MIN;
-	tango_thermal_init(priv);
-
-	tzdev = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, priv, &ops);
-	return PTR_ERR_OR_ZERO(tzdev);
-}
-
-static int __maybe_unused tango_thermal_resume(struct device *dev)
-{
-	tango_thermal_init(dev_get_drvdata(dev));
-	return 0;
-}
-
-static SIMPLE_DEV_PM_OPS(tango_thermal_pm, NULL, tango_thermal_resume);
-
-static const struct of_device_id tango_sensor_ids[] = {
-	{
-		.compatible = "sigma,smp8758-thermal",
-	},
-	{ /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, tango_sensor_ids);
-
-static struct platform_driver tango_thermal_driver = {
-	.probe	= tango_thermal_probe,
-	.driver	= {
-		.name		= "tango-thermal",
-		.of_match_table	= tango_sensor_ids,
-		.pm		= &tango_thermal_pm,
-	},
-};
-
-module_platform_driver(tango_thermal_driver);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Sigma Designs");
-MODULE_DESCRIPTION("Tango temperature sensor");
-- 
2.29.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/2] thermal: remove tango driver

[Måns Rullgård]

Arnd Bergmann <arnd@kernel.org> writes:

> From: Arnd Bergmann <arnd@arndb.de>
>
> The tango platform is getting removed, so the driver is no
> longer needed.
>
> Cc: Marc Gonzalez <marc.w.gonzalez@free.fr>
> Cc: Mans Rullgard <mans@mansr.com>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Acked-by: Mans Rullgard <mans@mansr.com>

> ---
>  .../bindings/thermal/tango-thermal.txt        |  17 ---
>  drivers/thermal/Kconfig                       |   9 --
>  drivers/thermal/Makefile                      |   1 -
>  drivers/thermal/tango_thermal.c               | 126 ------------------
>  4 files changed, 153 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/thermal/tango-thermal.txt
>  delete mode 100644 drivers/thermal/tango_thermal.c
>
> diff --git a/Documentation/devicetree/bindings/thermal/tango-thermal.txt b/Documentation/devicetree/bindings/thermal/tango-thermal.txt
> deleted file mode 100644
> index 2c918d742867..000000000000
> --- a/Documentation/devicetree/bindings/thermal/tango-thermal.txt
> +++ /dev/null
> @@ -1,17 +0,0 @@
> -* Tango Thermal
> -
> -The SMP8758 SoC includes 3 instances of this temperature sensor
> -(in the CPU, video decoder, and PCIe controller).
> -
> -Required properties:
> -- #thermal-sensor-cells: Should be 0 (see Documentation/devicetree/bindings/thermal/thermal-sensor.yaml)
>
> -- compatible: "sigma,smp8758-thermal"
> -- reg: Address range of the thermal registers
> -
> -Example:
> -
> -	cpu_temp: thermal@920100 {
> -		#thermal-sensor-cells = <0>;
> -		compatible = "sigma,smp8758-thermal";
> -		reg = <0x920100 12>;
> -	};
>
> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> index 7edc8dc6bbab..cf199574c096 100644
> --- a/drivers/thermal/Kconfig
> +++ b/drivers/thermal/Kconfig
> @@ -450,15 +450,6 @@ depends on (ARCH_STI || ARCH_STM32) && OF
>  source "drivers/thermal/st/Kconfig"
>  endmenu
>
> -config TANGO_THERMAL
> -	tristate "Tango thermal management"
> -	depends on ARCH_TANGO || COMPILE_TEST
> -	help
> -	  Enable the Tango thermal driver, which supports the primitive
> -	  temperature sensor embedded in Tango chips since the SMP8758.
> -	  This sensor only generates a 1-bit signal to indicate whether
> -	  the die temperature exceeds a programmable threshold.
> -
>  source "drivers/thermal/tegra/Kconfig"
>
>  config GENERIC_ADC_THERMAL
> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> index b64dd50a6629..a44dda2d03bc 100644
> --- a/drivers/thermal/Makefile
> +++ b/drivers/thermal/Makefile
> @@ -42,7 +42,6 @@ obj-y				+= samsung/
>  obj-$(CONFIG_DOVE_THERMAL)  	+= dove_thermal.o
>  obj-$(CONFIG_DB8500_THERMAL)	+= db8500_thermal.o
>  obj-$(CONFIG_ARMADA_THERMAL)	+= armada_thermal.o
> -obj-$(CONFIG_TANGO_THERMAL)	+= tango_thermal.o
>  obj-$(CONFIG_IMX_THERMAL)	+= imx_thermal.o
>  obj-$(CONFIG_IMX_SC_THERMAL)	+= imx_sc_thermal.o
>  obj-$(CONFIG_IMX8MM_THERMAL)	+= imx8mm_thermal.o
> diff --git a/drivers/thermal/tango_thermal.c b/drivers/thermal/tango_thermal.c
> deleted file mode 100644
> index 304b461e12aa..000000000000
> --- a/drivers/thermal/tango_thermal.c
> +++ /dev/null
> @@ -1,126 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -#include <linux/io.h>
> -#include <linux/delay.h>
> -#include <linux/module.h>
> -#include <linux/thermal.h>
> -#include <linux/platform_device.h>
> -
> -/*
> - * According to a data sheet draft, "this temperature sensor uses a bandgap
> - * type of circuit to compare a voltage which has a negative temperature
> - * coefficient with a voltage that is proportional to absolute temperature.
> - * A resistor bank allows 41 different temperature thresholds to be selected
> - * and the logic output will then indicate whether the actual die temperature
> - * lies above or below the selected threshold."
> - */
> -
> -#define TEMPSI_CMD	0
> -#define TEMPSI_RES	4
> -#define TEMPSI_CFG	8
> -
> -#define CMD_OFF		0
> -#define CMD_ON		1
> -#define CMD_READ	2
> -
> -#define IDX_MIN		15
> -#define IDX_MAX		40
> -
> -struct tango_thermal_priv {
> -	void __iomem *base;
> -	int thresh_idx;
> -};
> -
> -static bool temp_above_thresh(void __iomem *base, int thresh_idx)
> -{
> -	writel(CMD_READ | thresh_idx << 8, base + TEMPSI_CMD);
> -	usleep_range(10, 20);
> -	writel(CMD_READ | thresh_idx << 8, base + TEMPSI_CMD);
> -
> -	return readl(base + TEMPSI_RES);
> -}
> -
> -static int tango_get_temp(void *arg, int *res)
> -{
> -	struct tango_thermal_priv *priv = arg;
> -	int idx = priv->thresh_idx;
> -
> -	if (temp_above_thresh(priv->base, idx)) {
> -		/* Search upward by incrementing thresh_idx */
> -		while (idx < IDX_MAX && temp_above_thresh(priv->base, ++idx))
> -			cpu_relax();
> -		idx = idx - 1; /* always return lower bound */
> -	} else {
> -		/* Search downward by decrementing thresh_idx */
> -		while (idx > IDX_MIN && !temp_above_thresh(priv->base, --idx))
> -			cpu_relax();
> -	}
> -
> -	*res = (idx * 9 / 2 - 38) * 1000; /* millidegrees Celsius */
> -	priv->thresh_idx = idx;
> -
> -	return 0;
> -}
> -
> -static const struct thermal_zone_of_device_ops ops = {
> -	.get_temp	= tango_get_temp,
> -};
> -
> -static void tango_thermal_init(struct tango_thermal_priv *priv)
> -{
> -	writel(0, priv->base + TEMPSI_CFG);
> -	writel(CMD_ON, priv->base + TEMPSI_CMD);
> -}
> -
> -static int tango_thermal_probe(struct platform_device *pdev)
> -{
> -	struct resource *res;
> -	struct tango_thermal_priv *priv;
> -	struct thermal_zone_device *tzdev;
> -
> -	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> -	if (!priv)
> -		return -ENOMEM;
> -
> -	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> -	priv->base = devm_ioremap_resource(&pdev->dev, res);
> -	if (IS_ERR(priv->base))
> -		return PTR_ERR(priv->base);
> -
> -	platform_set_drvdata(pdev, priv);
> -	priv->thresh_idx = IDX_MIN;
> -	tango_thermal_init(priv);
> -
> -	tzdev = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, priv, &ops);
> -	return PTR_ERR_OR_ZERO(tzdev);
> -}
> -
> -static int __maybe_unused tango_thermal_resume(struct device *dev)
> -{
> -	tango_thermal_init(dev_get_drvdata(dev));
> -	return 0;
> -}
> -
> -static SIMPLE_DEV_PM_OPS(tango_thermal_pm, NULL, tango_thermal_resume);
> -
> -static const struct of_device_id tango_sensor_ids[] = {
> -	{
> -		.compatible = "sigma,smp8758-thermal",
> -	},
> -	{ /* sentinel */ }
> -};
> -MODULE_DEVICE_TABLE(of, tango_sensor_ids);
> -
> -static struct platform_driver tango_thermal_driver = {
> -	.probe	= tango_thermal_probe,
> -	.driver	= {
> -		.name		= "tango-thermal",
> -		.of_match_table	= tango_sensor_ids,
> -		.pm		= &tango_thermal_pm,
> -	},
> -};
> -
> -module_platform_driver(tango_thermal_driver);
> -
> -MODULE_LICENSE("GPL");
> -MODULE_AUTHOR("Sigma Designs");
> -MODULE_DESCRIPTION("Tango temperature sensor");
> -- 
>
> 2.29.2
>

-- 
Måns Rullgård

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 2/2] thermal: remove zx driver

[Arnd Bergmann]

From: Arnd Bergmann <arnd@arndb.de>

The zte zx platform is getting removed, so this driver is no
longer needed.

Cc: Jun Nie <jun.nie@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 .../bindings/thermal/zx2967-thermal.txt       | 116 --------
 drivers/thermal/Kconfig                       |   8 -
 drivers/thermal/Makefile                      |   1 -
 drivers/thermal/zx2967_thermal.c              | 256 ------------------
 4 files changed, 381 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/thermal/zx2967-thermal.txt
 delete mode 100644 drivers/thermal/zx2967_thermal.c

diff --git a/Documentation/devicetree/bindings/thermal/zx2967-thermal.txt b/Documentation/devicetree/bindings/thermal/zx2967-thermal.txt
deleted file mode 100644
index 3dc1c6bf0478..000000000000
--- a/Documentation/devicetree/bindings/thermal/zx2967-thermal.txt
+++ /dev/null
@@ -1,116 +0,0 @@
-* ZTE zx2967 family Thermal
-
-Required Properties:
-- compatible: should be one of the following.
-    * zte,zx296718-thermal
-- reg: physical base address of the controller and length of memory mapped
-    region.
-- clocks : Pairs of phandle and specifier referencing the controller's clocks.
-- clock-names: "topcrm" for the topcrm clock.
-	       "apb" for the apb clock.
-- #thermal-sensor-cells: must be 0.
-
-Please note: slope coefficient defined in thermal-zones section need to be
-multiplied by 1000.
-
-Example for tempsensor:
-
-	tempsensor: tempsensor@148a000 {
-		compatible = "zte,zx296718-thermal";
-		reg = <0x0148a000 0x20>;
-		clocks = <&topcrm TEMPSENSOR_GATE>, <&audiocrm AUDIO_TS_PCLK>;
-		clock-names = "topcrm", "apb";
-		#thermal-sensor-cells = <0>;
-	};
-
-Example for cooling device:
-
-	cooling_dev: cooling_dev {
-		cluster0_cooling_dev: cluster0-cooling-dev {
-			#cooling-cells = <2>;
-			cpumask = <0xf>;
-			capacitance = <1500>;
-		};
-
-	cluster1_cooling_dev: cluster1-cooling-dev {
-			#cooling-cells = <2>;
-			cpumask = <0x30>;
-			capacitance = <2000>;
-		};
-	};
-
-Example for thermal zones:
-
-	thermal-zones {
-		zx296718_thermal: zx296718_thermal {
-			polling-delay-passive = <500>;
-			polling-delay = <1000>;
-			sustainable-power = <6500>;
-
-			thermal-sensors = <&tempsensor 0>;
-			/*
-			 * slope need to be multiplied by 1000.
-			 */
-			coefficients = <1951 (-922)>;
-
-			trips {
-				trip0: switch_on_temperature {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip1: desired_temperature {
-					temperature = <100000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				crit: critical_temperature {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-
-			cooling-maps {
-				map0 {
-					trip = <&trip0>;
-					cooling-device = <&gpu 2 5>;
-				};
-
-				map1 {
-					trip = <&trip0>;
-					cooling-device = <&cluster0_cooling_dev 1 2>;
-				};
-
-				map2 {
-					trip = <&trip1>;
-					cooling-device = <&cluster0_cooling_dev 1 2>;
-				};
-
-				map3 {
-					trip = <&crit>;
-					cooling-device = <&cluster0_cooling_dev 1 2>;
-				};
-
-				map4 {
-					trip = <&trip0>;
-					cooling-device = <&cluster1_cooling_dev 1 2>;
-					contribution = <9000>;
-				};
-
-				map5 {
-					trip = <&trip1>;
-					cooling-device = <&cluster1_cooling_dev 1 2>;
-					contribution = <4096>;
-				};
-
-				map6 {
-					trip = <&crit>;
-					cooling-device = <&cluster1_cooling_dev 1 2>;
-					contribution = <4096>;
-				};
-			};
-		};
-	};
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index cf199574c096..d7f44deab5b1 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -467,14 +467,6 @@ depends on (ARCH_QCOM && OF) || COMPILE_TEST
 source "drivers/thermal/qcom/Kconfig"
 endmenu
 
-config ZX2967_THERMAL
-	tristate "Thermal sensors on zx2967 SoC"
-	depends on ARCH_ZX || COMPILE_TEST
-	help
-	  Enable the zx2967 thermal sensors driver, which supports
-	  the primitive temperature sensor embedded in zx2967 SoCs.
-	  This sensor generates the real time die temperature.
-
 config UNIPHIER_THERMAL
 	tristate "Socionext UniPhier thermal driver"
 	depends on ARCH_UNIPHIER || COMPILE_TEST
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index a44dda2d03bc..82fc3e616e54 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -56,7 +56,6 @@ obj-y				+= tegra/
 obj-$(CONFIG_HISI_THERMAL)     += hisi_thermal.o
 obj-$(CONFIG_MTK_THERMAL)	+= mtk_thermal.o
 obj-$(CONFIG_GENERIC_ADC_THERMAL)	+= thermal-generic-adc.o
-obj-$(CONFIG_ZX2967_THERMAL)	+= zx2967_thermal.o
 obj-$(CONFIG_UNIPHIER_THERMAL)	+= uniphier_thermal.o
 obj-$(CONFIG_AMLOGIC_THERMAL)     += amlogic_thermal.o
 obj-$(CONFIG_SPRD_THERMAL)	+= sprd_thermal.o
diff --git a/drivers/thermal/zx2967_thermal.c b/drivers/thermal/zx2967_thermal.c
deleted file mode 100644
index 8e3a2d3c2f9a..000000000000
--- a/drivers/thermal/zx2967_thermal.c
+++ /dev/null
@@ -1,256 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * ZTE's zx2967 family thermal sensor driver
- *
- * Copyright (C) 2017 ZTE Ltd.
- *
- * Author: Baoyou Xie <baoyou.xie@linaro.org>
- */
-
-#include <linux/clk.h>
-#include <linux/device.h>
-#include <linux/err.h>
-#include <linux/iopoll.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/thermal.h>
-
-/* Power Mode: 0->low 1->high */
-#define ZX2967_THERMAL_POWER_MODE	0
-#define ZX2967_POWER_MODE_LOW		0
-#define ZX2967_POWER_MODE_HIGH		1
-
-/* DCF Control Register */
-#define ZX2967_THERMAL_DCF		0x4
-#define ZX2967_DCF_EN			BIT(1)
-#define ZX2967_DCF_FREEZE		BIT(0)
-
-/* Selection Register */
-#define ZX2967_THERMAL_SEL		0x8
-
-/* Control Register */
-#define ZX2967_THERMAL_CTRL		0x10
-
-#define ZX2967_THERMAL_READY		BIT(12)
-#define ZX2967_THERMAL_TEMP_MASK	GENMASK(11, 0)
-#define ZX2967_THERMAL_ID_MASK		0x18
-#define ZX2967_THERMAL_ID		0x10
-
-#define ZX2967_GET_TEMP_TIMEOUT_US	(100 * 1024)
-
-/**
- * struct zx2967_thermal_priv - zx2967 thermal sensor private structure
- * @tzd: struct thermal_zone_device where the sensor is registered
- * @lock: prevents read sensor in parallel
- * @clk_topcrm: topcrm clk structure
- * @clk_apb: apb clk structure
- * @regs: pointer to base address of the thermal sensor
- * @dev: struct device pointer
- */
-
-struct zx2967_thermal_priv {
-	struct thermal_zone_device	*tzd;
-	struct mutex			lock;
-	struct clk			*clk_topcrm;
-	struct clk			*clk_apb;
-	void __iomem			*regs;
-	struct device			*dev;
-};
-
-static int zx2967_thermal_get_temp(void *data, int *temp)
-{
-	void __iomem *regs;
-	struct zx2967_thermal_priv *priv = data;
-	u32 val;
-	int ret;
-
-	if (!priv->tzd)
-		return -EAGAIN;
-
-	regs = priv->regs;
-	mutex_lock(&priv->lock);
-	writel_relaxed(ZX2967_POWER_MODE_LOW,
-		       regs + ZX2967_THERMAL_POWER_MODE);
-	writel_relaxed(ZX2967_DCF_EN, regs + ZX2967_THERMAL_DCF);
-
-	val = readl_relaxed(regs + ZX2967_THERMAL_SEL);
-	val &= ~ZX2967_THERMAL_ID_MASK;
-	val |= ZX2967_THERMAL_ID;
-	writel_relaxed(val, regs + ZX2967_THERMAL_SEL);
-
-	/*
-	 * Must wait for a while, surely it's a bit odd.
-	 * otherwise temperature value we got has a few deviation, even if
-	 * the THERMAL_READY bit is set.
-	 */
-	usleep_range(100, 300);
-	ret = readx_poll_timeout(readl, regs + ZX2967_THERMAL_CTRL,
-				 val, val & ZX2967_THERMAL_READY, 300,
-				 ZX2967_GET_TEMP_TIMEOUT_US);
-	if (ret) {
-		dev_err(priv->dev, "Thermal sensor data timeout\n");
-		goto unlock;
-	}
-
-	writel_relaxed(ZX2967_DCF_FREEZE | ZX2967_DCF_EN,
-		       regs + ZX2967_THERMAL_DCF);
-	val = readl_relaxed(regs + ZX2967_THERMAL_CTRL)
-			 & ZX2967_THERMAL_TEMP_MASK;
-	writel_relaxed(ZX2967_POWER_MODE_HIGH,
-		       regs + ZX2967_THERMAL_POWER_MODE);
-
-	/*
-	 * Calculate temperature
-	 * In dts, slope is multiplied by 1000.
-	 */
-	*temp = DIV_ROUND_CLOSEST(((s32)val + priv->tzd->tzp->offset) * 1000,
-				  priv->tzd->tzp->slope);
-
-unlock:
-	mutex_unlock(&priv->lock);
-	return ret;
-}
-
-static const struct thermal_zone_of_device_ops zx2967_of_thermal_ops = {
-	.get_temp = zx2967_thermal_get_temp,
-};
-
-static int zx2967_thermal_probe(struct platform_device *pdev)
-{
-	struct zx2967_thermal_priv *priv;
-	struct resource *res;
-	int ret;
-
-	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
-	if (!priv)
-		return -ENOMEM;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	priv->regs = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(priv->regs))
-		return PTR_ERR(priv->regs);
-
-	priv->clk_topcrm = devm_clk_get(&pdev->dev, "topcrm");
-	if (IS_ERR(priv->clk_topcrm)) {
-		ret = PTR_ERR(priv->clk_topcrm);
-		dev_err(&pdev->dev, "failed to get topcrm clock: %d\n", ret);
-		return ret;
-	}
-
-	ret = clk_prepare_enable(priv->clk_topcrm);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to enable topcrm clock: %d\n",
-			ret);
-		return ret;
-	}
-
-	priv->clk_apb = devm_clk_get(&pdev->dev, "apb");
-	if (IS_ERR(priv->clk_apb)) {
-		ret = PTR_ERR(priv->clk_apb);
-		dev_err(&pdev->dev, "failed to get apb clock: %d\n", ret);
-		goto disable_clk_topcrm;
-	}
-
-	ret = clk_prepare_enable(priv->clk_apb);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to enable apb clock: %d\n",
-			ret);
-		goto disable_clk_topcrm;
-	}
-
-	mutex_init(&priv->lock);
-	priv->tzd = thermal_zone_of_sensor_register(&pdev->dev,
-					0, priv, &zx2967_of_thermal_ops);
-
-	if (IS_ERR(priv->tzd)) {
-		ret = PTR_ERR(priv->tzd);
-		dev_err(&pdev->dev, "failed to register sensor: %d\n", ret);
-		goto disable_clk_all;
-	}
-
-	if (priv->tzd->tzp->slope == 0) {
-		thermal_zone_of_sensor_unregister(&pdev->dev, priv->tzd);
-		dev_err(&pdev->dev, "coefficients of sensor is invalid\n");
-		ret = -EINVAL;
-		goto disable_clk_all;
-	}
-
-	priv->dev = &pdev->dev;
-	platform_set_drvdata(pdev, priv);
-
-	return 0;
-
-disable_clk_all:
-	clk_disable_unprepare(priv->clk_apb);
-disable_clk_topcrm:
-	clk_disable_unprepare(priv->clk_topcrm);
-	return ret;
-}
-
-static int zx2967_thermal_exit(struct platform_device *pdev)
-{
-	struct zx2967_thermal_priv *priv = platform_get_drvdata(pdev);
-
-	thermal_zone_of_sensor_unregister(&pdev->dev, priv->tzd);
-	clk_disable_unprepare(priv->clk_topcrm);
-	clk_disable_unprepare(priv->clk_apb);
-
-	return 0;
-}
-
-static const struct of_device_id zx2967_thermal_id_table[] = {
-	{ .compatible = "zte,zx296718-thermal" },
-	{}
-};
-MODULE_DEVICE_TABLE(of, zx2967_thermal_id_table);
-
-#ifdef CONFIG_PM_SLEEP
-static int zx2967_thermal_suspend(struct device *dev)
-{
-	struct zx2967_thermal_priv *priv = dev_get_drvdata(dev);
-
-	if (priv && priv->clk_topcrm)
-		clk_disable_unprepare(priv->clk_topcrm);
-
-	if (priv && priv->clk_apb)
-		clk_disable_unprepare(priv->clk_apb);
-
-	return 0;
-}
-
-static int zx2967_thermal_resume(struct device *dev)
-{
-	struct zx2967_thermal_priv *priv = dev_get_drvdata(dev);
-	int error;
-
-	error = clk_prepare_enable(priv->clk_topcrm);
-	if (error)
-		return error;
-
-	error = clk_prepare_enable(priv->clk_apb);
-	if (error) {
-		clk_disable_unprepare(priv->clk_topcrm);
-		return error;
-	}
-
-	return 0;
-}
-#endif
-
-static SIMPLE_DEV_PM_OPS(zx2967_thermal_pm_ops,
-			 zx2967_thermal_suspend, zx2967_thermal_resume);
-
-static struct platform_driver zx2967_thermal_driver = {
-	.probe = zx2967_thermal_probe,
-	.remove = zx2967_thermal_exit,
-	.driver = {
-		.name = "zx2967_thermal",
-		.of_match_table = zx2967_thermal_id_table,
-		.pm = &zx2967_thermal_pm_ops,
-	},
-};
-module_platform_driver(zx2967_thermal_driver);
-
-MODULE_AUTHOR("Baoyou Xie <baoyou.xie@linaro.org>");
-MODULE_DESCRIPTION("ZTE zx2967 thermal driver");
-MODULE_LICENSE("GPL v2");
-- 
2.29.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel