From: Maxime Ripard <maxime@cerno.tech>
To: Andre Przywara <andre.przywara@arm.com>
Cc: "Jernej Skrabec" <jernej.skrabec@siol.net>,
"Samuel Holland" <samuel@sholland.org>,
"Yangtao Li" <tiny.windzz@gmail.com>,
linux-sunxi@googlegroups.com, linux-kernel@vger.kernel.org,
"Chen-Yu Tsai" <wens@csie.org>,
"Clément Péron" <peron.clem@gmail.com>,
"Shuosheng Huang" <huangshuosheng@allwinnertech.com>,
"Ulf Hansson" <ulf.hansson@linaro.org>,
"Linus Walleij" <linus.walleij@linaro.org>,
linux-arm-kernel@lists.infradead.org,
"Icenowy Zheng" <icenowy@aosc.io>
Subject: Re: [PATCH v4 00/21] arm64: sunxi: Initial Allwinner H616 SoC support
Date: Tue, 26 Jan 2021 13:07:47 +0100 [thread overview]
Message-ID: <20210126120747.zvsk2ttowruemefu@gilmour> (raw)
In-Reply-To: <20210125151811.11871-1-andre.przywara@arm.com>
[-- Attachment #1.1: Type: text/plain, Size: 4552 bytes --]
Hi,
On Mon, Jan 25, 2021 at 03:17:50PM +0000, Andre Przywara wrote:
> Hi,
>
> an update from the v3 last week, to add support for the Allwinner H616
> SoC. Still based on the (updated) sunxi/for-next branch.
> I am omitting the MMC and pinctrl patches now, as they have been taken
> by Ulf and LinusW already into their trees.
>
> I addressed the comments from the list, though not sure if the HOSC clock
> coming from the RTC is really a good idea (didn't change it).
>
> I was hoping that at least the clock and AXP patches (01/21-06/21) could
> make it into 5.12 still? That would allow booting boards from SD card.
> I am happy to strip the .dtsi and .dts patch to only contain the devices
> that we actually support then, if needed.
>
> For the changes: I split the joint DT bindings patch into subsystem
> specific ones, hopefully this simplifies merging. There is a new fix
> for the axp20x-pek driver, and the AXP IRQ fix has been amended as well
> (according to Samuel's comments).
>
> I eventually got USB to work, by requiring PHY 2 for [EO]HCI 1 & 3 as well.
> Not sure this is the right fix, it might be just one clock or reset
> line from that PHY that is needed for the others as well. Will do further
> experiments.
>
> For a more detailed changelog, see below.
With your series applied:
ARCH=arm64 make -j18 dtbs_check
arch/arm64/Makefile:25: ld does not support --fix-cortex-a53-843419; kernel may be susceptible to erratum
arch/arm64/Makefile:33: LSE atomics not supported by binutils
arch/arm64/Makefile:44: Detected assembler with broken .inst; disassembly will be unreliable
DTC arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dtb
DTC arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dt.yaml
CHECK arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dt.yaml
/home/max/Work/allwinner/build/arm64/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dt.yaml: clock@3001000: clocks: [[7], [8, 0], [8, 2]] is too long
From schema: /home/max/Work/repos/linux/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml
/home/max/Work/allwinner/build/arm64/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dt.yaml: clock@3001000: clock-names: ['hosc', 'losc', 'iosc'] is too long
From schema: /home/max/Work/repos/linux/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml
/home/max/Work/allwinner/build/arm64/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dt.yaml: ethernet@5020000: compatible: 'oneOf' conditional failed, one must be fixed:
['allwinner,sun50i-h616-emac', 'allwinner,sun50i-a64-emac'] is too long
Additional items are not allowed ('allwinner,sun50i-a64-emac' was unexpected)
'allwinner,sun8i-a83t-emac' was expected
'allwinner,sun8i-h3-emac' was expected
'allwinner,sun8i-r40-emac' was expected
'allwinner,sun8i-v3s-emac' was expected
'allwinner,sun50i-a64-emac' was expected
'allwinner,sun50i-h6-emac' was expected
From schema: /home/max/Work/repos/linux/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
/home/max/Work/allwinner/build/arm64/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dt.yaml: clock@7010000: clocks: [[7], [8, 0], [8, 2], [2, 4]] is too long
From schema: /home/max/Work/repos/linux/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml
/home/max/Work/allwinner/build/arm64/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dt.yaml: clock@7010000: clock-names: ['hosc', 'losc', 'iosc', 'pll-periph'] is too long
From schema: /home/max/Work/repos/linux/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml
/home/max/Work/allwinner/build/arm64/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dt.yaml: rsb@7083000: compatible: 'oneOf' conditional failed, one must be fixed:
['allwinner,sun50i-h616-rsb', 'allwinner,sun8i-a23-rsb'] is too long
Additional items are not allowed ('allwinner,sun8i-a23-rsb' was unexpected)
'allwinner,sun8i-a23-rsb' was expected
'allwinner,sun8i-a83t-rsb' was expected
From schema: /home/max/Work/repos/linux/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml
/home/max/Work/allwinner/build/arm64/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dt.yaml: leds: led-0:default-state:0: 'on' is not of type 'array'
From schema: /home/max/Work/repos/linux/Documentation/devicetree/bindings/leds/leds-gpio.yaml
The last one is not related to your changes, but the rest must be fixed
Maxime
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-01-26 12:09 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-25 15:17 [PATCH v4 00/21] arm64: sunxi: Initial Allwinner H616 SoC support Andre Przywara
2021-01-25 15:17 ` [PATCH v4 01/21] dt-bindings: clk: sunxi-ccu: Add compatible string for Allwinner H616 Andre Przywara
2021-01-25 15:17 ` [PATCH v4 02/21] clk: sunxi-ng: Add support for the Allwinner H616 R-CCU Andre Przywara
2021-01-25 15:17 ` [PATCH v4 03/21] clk: sunxi-ng: Add support for the Allwinner H616 CCU Andre Przywara
2021-01-25 15:17 ` [PATCH v4 04/21] dt-bindings: mfd: axp20x: Add AXP305 compatible (plus optional IRQ) Andre Przywara
2021-01-25 15:17 ` [PATCH v4 05/21] Input: axp20x-pek: Bail out if AXP has no interrupt line connected Andre Przywara
2021-01-25 15:17 ` [PATCH v4 06/21] mfd: axp20x: Allow AXP chips without interrupt lines Andre Przywara
2021-01-25 15:17 ` [PATCH v4 07/21] dt-bindings: sram: sunxi-sram: Add H616 compatible string Andre Przywara
2021-01-25 15:17 ` [PATCH v4 08/21] soc: sunxi: sram: Add support for more than one EMAC clock Andre Przywara
2021-01-25 15:17 ` [PATCH v4 09/21] dt-bindings: watchdog: sun4i: Add H616 compatible string Andre Przywara
2021-01-25 15:18 ` [PATCH v4 10/21] dt-bindings: i2c: mv64xxx: " Andre Przywara
2021-01-25 15:18 ` [PATCH v4 11/21] dt-bindings: media: IR: Add H616 IR " Andre Przywara
2021-01-25 15:18 ` [PATCH v4 12/21] dt-bindings: rtc: sun6i: Add H616 " Andre Przywara
2021-01-25 22:51 ` Alexandre Belloni
2021-01-26 0:14 ` Andre Przywara
2021-01-25 15:18 ` [PATCH v4 13/21] dt-bindings: spi: sunxi: " Andre Przywara
2021-01-25 15:18 ` [PATCH v4 14/21] net: stmmac: dwmac-sun8i: Prepare for second EMAC clock register Andre Przywara
2021-01-25 15:18 ` [PATCH v4 15/21] phy: sun4i-usb: Rework HCI PHY (aka. "pmu_unk1") handling Andre Przywara
2021-01-25 15:18 ` [PATCH v4 16/21] dt-bindings: usb: Add H616 compatible string Andre Przywara
2021-01-25 15:18 ` [PATCH v4 17/21] dt-bindings: usb: sunxi-musb: " Andre Przywara
2021-01-25 15:18 ` [PATCH v4 18/21] phy: sun4i-usb: Add support for the H616 USB PHY Andre Przywara
2021-01-25 15:18 ` [PATCH v4 19/21] arm64: dts: allwinner: Add Allwinner H616 .dtsi file Andre Przywara
2021-01-25 15:18 ` [PATCH v4 20/21] dt-bindings: arm: sunxi: Add OrangePi Zero 2 binding Andre Przywara
2021-01-25 15:18 ` [PATCH v4 21/21] arm64: dts: allwinner: Add OrangePi Zero 2 .dts Andre Przywara
2021-01-26 12:07 ` Maxime Ripard [this message]
2021-01-27 17:15 ` (subset) [PATCH v4 00/21] arm64: sunxi: Initial Allwinner H616 SoC support Mark Brown
2021-01-27 17:29 ` Andre Przywara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210126120747.zvsk2ttowruemefu@gilmour \
--to=maxime@cerno.tech \
--cc=andre.przywara@arm.com \
--cc=huangshuosheng@allwinnertech.com \
--cc=icenowy@aosc.io \
--cc=jernej.skrabec@siol.net \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=peron.clem@gmail.com \
--cc=samuel@sholland.org \
--cc=tiny.windzz@gmail.com \
--cc=ulf.hansson@linaro.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox