[PATCH 02/11] dts: mvebu: Update A8K AP806 SDHCI settings

From: <kostap@marvell.com>
To: <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>
Cc: andrew@lunn.ch, jaz@semihalf.com, gregory.clement@bootlin.com,
	linux@armlinux.org.uk, nadavh@marvell.com, robh+dt@kernel.org,
	Konstantin Porotchkin <kostap@marvell.com>,
	stefanc@marvell.com, mw@semihalf.com, bpeled@marvell.com,
	sebastian.hesselbarth@gmail.com
Subject: [PATCH 02/11] dts: mvebu: Update A8K AP806 SDHCI settings
Date: Wed, 3 Feb 2021 15:31:29 +0200	[thread overview]
Message-ID: <20210203133138.10754-3-kostap@marvell.com> (raw)
In-Reply-To: <20210203133138.10754-1-kostap@marvell.com>

From: Konstantin Porotchkin <kostap@marvell.com>

Update the settings for AP806 SDHCI interface according to
latest Xenon drivers changes.
- no need to select the PHY slow mode anymore
- recommended to add HS400 support at 1.8V signalling on AP806-B0
- fix the bus witdth for A8040 DB from 4 to 8 bits.

Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
---
 arch/arm64/boot/dts/marvell/armada-8040-db.dts     | 11 ++++++++++-
 arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi |  5 -----
 arch/arm64/boot/dts/marvell/armada-ap80x.dtsi      |  1 -
 3 files changed, 10 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
index 09fb5256f1db..6362e654a823 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
@@ -347,7 +347,16 @@
 
 &ap_sdhci0 {
 	status = "okay";
-	bus-width = <4>;
+	bus-width = <8>;
+	/* The below property should be added to boards with AP806-B0
+	 * for enabling HS400 speed mode. Otherwise the device highest
+	 * speed mode will be HS200.
+	 * Should not be added to boards with earlier release of AP806
+	 * since it will cause SDHCI driver to fail upon initialization.
+	 * Reference - HWE-7296210 (errata for releases A0/A1/A2)
+	 *
+	 * mmc-hs400-1_8v;
+	 */
 	non-removable;
 };
 
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
index 73733b4126e2..69653de998e2 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
@@ -109,11 +109,6 @@
 
 &ap_sdhci0 {
 	bus-width = <8>;
-	/*
-	 * Not stable in HS modes - phy needs "more calibration", so add
-	 * the "slow-mode" and disable SDR104, SDR50 and DDR50 modes.
-	 */
-	marvell,xenon-phy-slow-mode;
 	no-1-8-v;
 	no-sd;
 	no-sdio;
diff --git a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
index 12e477f1aeb9..edd6131a0587 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
@@ -257,7 +257,6 @@
 				clock-names = "core";
 				clocks = <&ap_clk 4>;
 				dma-coherent;
-				marvell,xenon-phy-slow-mode;
 				status = "disabled";
 			};
 
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
