[PATCH v7 08/23] arm64: Simplify init_el2_state to be non-VHE only

[Marc Zyngier <maz@kernel.org>]

As init_el2_state is now nVHE only, let's simplify it and drop
the VHE setup.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: David Brazdil <dbrazdil@google.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm64/include/asm/el2_setup.h | 33 ++++++++----------------------
 arch/arm64/kernel/head.S           |  2 +-
 arch/arm64/kvm/hyp/nvhe/hyp-init.S |  2 +-
 3 files changed, 10 insertions(+), 27 deletions(-)

diff --git a/arch/arm64/include/asm/el2_setup.h b/arch/arm64/include/asm/el2_setup.h
index 56c9e1cef180..d77d358f9395 100644
--- a/arch/arm64/include/asm/el2_setup.h
+++ b/arch/arm64/include/asm/el2_setup.h
@@ -32,16 +32,14 @@
  * to transparently mess with the EL0 bits via CNTKCTL_EL1 access in
  * EL2.
  */
-.macro __init_el2_timers mode
-.ifeqs "\mode", "nvhe"
+.macro __init_el2_timers
 	mrs	x0, cnthctl_el2
 	orr	x0, x0, #3			// Enable EL1 physical timers
 	msr	cnthctl_el2, x0
-.endif
 	msr	cntvoff_el2, xzr		// Clear virtual offset
 .endm
 
-.macro __init_el2_debug mode
+.macro __init_el2_debug
 	mrs	x1, id_aa64dfr0_el1
 	sbfx	x0, x1, #ID_AA64DFR0_PMUVER_SHIFT, #4
 	cmp	x0, #1
@@ -55,7 +53,6 @@
 	ubfx	x0, x1, #ID_AA64DFR0_PMSVER_SHIFT, #4
 	cbz	x0, .Lskip_spe_\@		// Skip if SPE not present
 
-.ifeqs "\mode", "nvhe"
 	mrs_s	x0, SYS_PMBIDR_EL1              // If SPE available at EL2,
 	and	x0, x0, #(1 << SYS_PMBIDR_EL1_P_SHIFT)
 	cbnz	x0, .Lskip_spe_el2_\@		// then permit sampling of physical
@@ -66,7 +63,6 @@
 	mov	x0, #(MDCR_EL2_E2PB_MASK << MDCR_EL2_E2PB_SHIFT)
 	orr	x2, x2, x0			// If we don't have VHE, then
 						// use EL1&0 translation.
-.endif
 
 .Lskip_spe_\@:
 	msr	mdcr_el2, x2			// Configure debug traps
@@ -142,37 +138,24 @@
 
 /**
  * Initialize EL2 registers to sane values. This should be called early on all
- * cores that were booted in EL2.
+ * cores that were booted in EL2. Note that everything gets initialised as
+ * if VHE was not evailable. The kernel context will be upgraded to VHE
+ * if possible later on in the boot process
  *
  * Regs: x0, x1 and x2 are clobbered.
  */
-.macro init_el2_state mode
-.ifnes "\mode", "vhe"
-.ifnes "\mode", "nvhe"
-.error "Invalid 'mode' argument"
-.endif
-.endif
-
+.macro init_el2_state
 	__init_el2_sctlr
-	__init_el2_timers \mode
-	__init_el2_debug \mode
+	__init_el2_timers
+	__init_el2_debug
 	__init_el2_lor
 	__init_el2_stage2
 	__init_el2_gicv3
 	__init_el2_hstr
-
-	/*
-	 * When VHE is not in use, early init of EL2 needs to be done here.
-	 * When VHE _is_ in use, EL1 will not be used in the host and
-	 * requires no configuration, and all non-hyp-specific EL2 setup
-	 * will be done via the _EL1 system register aliases in __cpu_setup.
-	 */
-.ifeqs "\mode", "nvhe"
 	__init_el2_nvhe_idregs
 	__init_el2_nvhe_cptr
 	__init_el2_nvhe_sve
 	__init_el2_nvhe_prepare_eret
-.endif
 .endm
 
 #endif /* __ARM_KVM_INIT_H__ */
diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
index 07445fd976ef..36212c05df42 100644
--- a/arch/arm64/kernel/head.S
+++ b/arch/arm64/kernel/head.S
@@ -501,7 +501,7 @@ SYM_INNER_LABEL(init_el2, SYM_L_LOCAL)
 	msr	hcr_el2, x0
 	isb
 
-	init_el2_state nvhe
+	init_el2_state
 
 	/* Hypervisor stub */
 	adr_l	x0, __hyp_stub_vectors
diff --git a/arch/arm64/kvm/hyp/nvhe/hyp-init.S b/arch/arm64/kvm/hyp/nvhe/hyp-init.S
index 31b060a44045..222cfc3e7190 100644
--- a/arch/arm64/kvm/hyp/nvhe/hyp-init.S
+++ b/arch/arm64/kvm/hyp/nvhe/hyp-init.S
@@ -189,7 +189,7 @@ SYM_CODE_START_LOCAL(__kvm_hyp_init_cpu)
 2:	msr	SPsel, #1			// We want to use SP_EL{1,2}
 
 	/* Initialize EL2 CPU state to sane values. */
-	init_el2_state nvhe			// Clobbers x0..x2
+	init_el2_state				// Clobbers x0..x2
 
 	/* Enable MMU, set vectors and stack. */
 	mov	x0, x28
-- 
2.29.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel