Re: [PATCH 4/8] arm64: dts: imx8mm-nitrogen-r2: add uarts

From: Krzysztof Kozlowski <krzk@kernel.org>
To: Adrien Grassein <adrien.grassein@gmail.com>
Cc: devicetree@vger.kernel.org, will@kernel.org, shawnguo@kernel.org,
	s.hauer@pengutronix.de, linux-kernel@vger.kernel.org,
	robh+dt@kernel.org, linux-imx@nxp.com, kernel@pengutronix.de,
	catalin.marinas@arm.com, festevam@gmail.com,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 4/8] arm64: dts: imx8mm-nitrogen-r2: add uarts
Date: Wed, 17 Feb 2021 15:22:48 +0100	[thread overview]
Message-ID: <20210217142248.klq36mraspeehiqj@kozik-lap> (raw)
In-Reply-To: <20210215231943.36910-5-adrien.grassein@gmail.com>

On Tue, Feb 16, 2021 at 12:19:39AM +0100, Adrien Grassein wrote:
> Add description and pinmuxing for uarts.
> 
> Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com>
> ---
>  .../boot/dts/freescale/imx8mm-nitrogen-r2.dts | 53 ++++++++++++++++++-
>  1 file changed, 52 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
> index 22acde0f3ba8..3c5b692f6ad1 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
> @@ -206,6 +206,15 @@ rtc@68 {
>  	};
>  };
>  
> +/* BT */
> +&uart1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart1>;
> +	assigned-clocks = <&clk IMX8MM_CLK_UART1>;

I see you have it also for uart2 - what is the purpose of it? What does
the "assigned-clocks" property alone do?

> +	uart-has-rtscts;
> +	status = "okay";
> +};
> +
>  /* console */
>  &uart2 {
>  	pinctrl-names = "default";
> @@ -215,6 +224,23 @@ &uart2 {
>  	status = "okay";
>  };
>  
> +/* J15 */
> +&uart3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart3>;
> +	assigned-clocks = <&clk IMX8MM_CLK_UART3>;
> +	uart-has-rtscts;
> +	status = "okay";
> +};
> +
> +/* J9 */
> +&uart4 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart4>;
> +	assigned-clocks = <&clk IMX8MM_CLK_UART4>;
> +	status = "okay";
> +};
> +
>  /* eMMC */
>  &usdhc1 {
>  	bus-width = <8>;
> @@ -353,6 +379,15 @@ MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x16
>  		>;
>  	};
>  
> +	pinctrl_uart1: uart1grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140
> +			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140
> +			MX8MM_IOMUXC_UART3_RXD_UART1_DCE_CTS_B 0x140
> +			MX8MM_IOMUXC_UART3_TXD_UART1_DCE_RTS_B 0x140
> +		>;
> +	};
> +
>  	pinctrl_uart2: uart2grp {
>  		fsl,pins = <
>  			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
> @@ -360,6 +395,22 @@ MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140
>  		>;
>  	};
>  
> +	pinctrl_uart3: uart3grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX 0x140
> +			MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX 0x140
> +			MX8MM_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x140
> +			MX8MM_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x140
> +		>;
> +	};
> +
> +	pinctrl_uart4: uart4grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x140
> +			MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x140
> +		>;
> +	};
> +
>  	pinctrl_usbotg1: usbotg1grp {
>  		fsl,pins = <
>  			MX8MM_IOMUXC_GPIO1_IO12_USB1_OTG_PWR	0x16
> @@ -370,7 +421,7 @@ MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC	0x156
>  	pinctrl_usbotg2: usbotg2grp {
>  		fsl,pins = <
>  			MX8MM_IOMUXC_GPIO1_IO14_USB2_OTG_PWR	0x16
> -			MX8MM_IOMUXC_GPIO1_IO15_USB2_OTG_OC	0x156
> +			MX8MM_IOMUXC_GPIO1_IO15_USB2_OTG_OC	0x15

This is not relevant to the topic.

Best regards,
Krzysztof

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel