Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Nathan Chancellor <nathan@kernel.org>
To: Ard Biesheuvel <ardb@kernel.org>
Cc: linux-efi@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH] efi: use 32-bit alignment for efi_guid_t literals
Date: Wed, 10 Mar 2021 15:21:39 -0700	[thread overview]
Message-ID: <20210310222139.7frwtzxd5jgxvwsl@archlinux-ax161> (raw)
In-Reply-To: <20210310081210.95147-1-ardb@kernel.org>

On Wed, Mar 10, 2021 at 09:12:10AM +0100, Ard Biesheuvel wrote:
> Commit 494c704f9af0 ("efi: Use 32-bit alignment for efi_guid_t") updated
> the type definition of efi_guid_t to ensure that it always appears
> sufficiently aligned (the UEFI spec is ambiguous about this, but given
> the fact that its EFI_GUID type is defined in terms of a struct carrying
> a uint32_t, the natural alignment is definitely >= 32 bits).
> 
> However, we missed the EFI_GUID() macro which is used to instantiate
> efi_guid_t literals: that macro is still based on the guid_t type,
> which does not have a minimum alignment at all. This results in warnings
> such as
> 
>   In file included from drivers/firmware/efi/mokvar-table.c:35:
>   include/linux/efi.h:1093:34: warning: passing 1-byte aligned argument to
>       4-byte aligned parameter 2 of 'get_var' may result in an unaligned pointer
>       access [-Walign-mismatch]
>           status = get_var(L"SecureBoot", &EFI_GLOBAL_VARIABLE_GUID, NULL, &size,
>                                           ^
>   include/linux/efi.h:1101:24: warning: passing 1-byte aligned argument to
>       4-byte aligned parameter 2 of 'get_var' may result in an unaligned pointer
>       access [-Walign-mismatch]
>           get_var(L"SetupMode", &EFI_GLOBAL_VARIABLE_GUID, NULL, &size, &setupmode);
> 
> The distinction only matters on CPUs that do not support misaligned loads
> fully, but 32-bit ARM's load-multiple instructions fall into that category,
> and these are likely to be emitted by the compiler that built the firmware
> for loading word-aligned 128-bit GUIDs from memory
> 
> Instead of bodging this further, let's simply switch to our own definition
> of efi_guid_t that carries a uint32_t as well. Since efi_guid_t is used as
> an opaque type everywhere in the EFI code, this is only a minor code change.
> 
> Reported-by: Nathan Chancellor <nathan@kernel.org>
> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

I ran this through my series of 32-bit and 64-bit x86 builds and I did
not see any additional warnings added because of it.

Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>

> ---
> 
> I am currently testing this change via my for-kernelci branch. Please give
> this some soak time in the other CIs that we have access to.
> 
>  include/linux/efi.h | 15 ++++++++++-----
>  1 file changed, 10 insertions(+), 5 deletions(-)
> 
> diff --git a/include/linux/efi.h b/include/linux/efi.h
> index 8710f5710c1d..f39e9ec7485f 100644
> --- a/include/linux/efi.h
> +++ b/include/linux/efi.h
> @@ -63,17 +63,22 @@ typedef void *efi_handle_t;
>   * is 32 bits not 8 bits like our guid_t. In some cases (i.e., on 32-bit ARM),
>   * this means that firmware services invoked by the kernel may assume that
>   * efi_guid_t* arguments are 32-bit aligned, and use memory accessors that
> - * do not tolerate misalignment. So let's set the minimum alignment to 32 bits.
> + * do not tolerate misalignment.
>   *
>   * Note that the UEFI spec as well as some comments in the EDK2 code base
>   * suggest that EFI_GUID should be 64-bit aligned, but this appears to be
>   * a mistake, given that no code seems to exist that actually enforces that
>   * or relies on it.
>   */
> -typedef guid_t efi_guid_t __aligned(__alignof__(u32));
> +typedef struct {
> +	u32	a;
> +	u16	b;
> +	u16	c;
> +	u8	d[8];
> +} efi_guid_t;
>  
>  #define EFI_GUID(a,b,c,d0,d1,d2,d3,d4,d5,d6,d7) \
> -	GUID_INIT(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7)
> +	(efi_guid_t){ a, b, c, { d0,d1,d2,d3,d4,d5,d6,d7 }}
>  
>  /*
>   * Generic EFI table header
> @@ -598,8 +603,8 @@ efi_guidcmp (efi_guid_t left, efi_guid_t right)
>  static inline char *
>  efi_guid_to_str(efi_guid_t *guid, char *out)
>  {
> -	sprintf(out, "%pUl", guid->b);
> -        return out;
> +	sprintf(out, "%pUl", guid);
> +	return out;
>  }
>  
>  extern void efi_init (void);
> -- 
> 2.30.1
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2021-03-10 22:23 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-10  8:12 [PATCH] efi: use 32-bit alignment for efi_guid_t literals Ard Biesheuvel
2021-03-10  8:32 ` Ard Biesheuvel
2021-03-10 22:21 ` Nathan Chancellor [this message]
2021-03-18 17:52   ` Ard Biesheuvel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210310222139.7frwtzxd5jgxvwsl@archlinux-ax161 \
    --to=nathan@kernel.org \
    --cc=ardb@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-efi@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox