Re: [PATCH 3/3] net: dsa: mt7530: setup core clock even in TRGMII mode

From: Vladimir Oltean <olteanv@gmail.com>
To: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Cc: Sean Wang <sean.wang@mediatek.com>,
	Landen Chao <Landen.Chao@mediatek.com>,
	Andrew Lunn <andrew@lunn.ch>,
	Vivien Didelot <vivien.didelot@gmail.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Russell King <linux@armlinux.org.uk>,
	netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 3/3] net: dsa: mt7530: setup core clock even in TRGMII mode
Date: Thu, 11 Mar 2021 01:10:26 +0200	[thread overview]
Message-ID: <20210310231026.lhxakeldngkr7prm@skbuf> (raw)
In-Reply-To: <20210310211420.649985-3-ilya.lipnitskiy@gmail.com>

Hello Ilya,

On Wed, Mar 10, 2021 at 01:14:20PM -0800, Ilya Lipnitskiy wrote:
> 3f9ef7785a9c ("MIPS: ralink: manage low reset lines") made it so mt7530
> actually resets the switch on platforms such as mt7621 (where bit 2 is
> the reset line for the switch). That exposed an issue where the switch
> would not function properly in TRGMII mode after a reset.
>
> Reconfigure core clock in TRGMII mode to fix the issue.
>
> Also, disable both core and TRGMII Tx clocks prior to reconfiguring.
> Previously, only the core clock was disabled, but not TRGMII Tx clock.
>
> Tested on Ubiquity ER-X (MT7621) with TRGMII mode enabled.
>
> Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
> ---

For the networking subsystem there are two git trees, "net" for bugfixes
and "net-next" for new features, and we specify the target tree using
git send-email --subject-prefix="PATCH net-next".

I assume you would like the v5.12 kernel to actually be functional on
the Ubiquiti ER-X switch, so I would recommend keeping this patch
minimal and splitting it out from the current series, and targeting it
towards the "net" tree, which will eventually get merged into one of the
v5.12 rc's and then into the final version. The other patches won't go
into v5.12 but into v5.13, hence the "next" name.

Also add these lines in your .gitconfig:

[core]
	abbrev = 12
[pretty]
	fixes = Fixes: %h (\"%s\")

and run:

git show 3f9ef7785a9c --pretty=fixes
Fixes: 3f9ef7785a9c ("MIPS: ralink: manage low reset lines")

and paste that "Fixes:" line in the commit message, right above your
Signed-off-by: tag.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel