From: Jonathan McDowell <noodles@earth.li>
To: "Sandy Huang" <hjc@rock-chips.com>,
"Heiko Stübner" <heiko@sntech.de>,
"David Airlie" <airlied@linux.ie>,
"Daniel Vetter" <daniel@ffwll.ch>,
dri-devel@lists.freedesktop.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH] drm/rockchip: Cope with endpoints that haven't been registered yet
Date: Tue, 16 Mar 2021 18:27:53 +0000 [thread overview]
Message-ID: <20210316182753.GA25685@earth.li> (raw)
The Rockchip RGB CRTC output driver attempts to avoid probing Rockchip
subdrivers to see if they're a connected panel or bridge. However part
of its checks assumes that if no OF platform device is found then it
can't be a valid bridge or panel. This causes issues with I2C controlled
bridges that have not yet been registered to the point they can be
found.
Change this to return EPROBE_DEFER instead of ENODEV and don't ignore
such devices. The subsequent call to drm_of_find_panel_or_bridge() will
return EPROBE_DEFER as well if there's actually a valid device we should
wait for.
Signed-off-by: Jonathan McDowell <noodles@earth.li>
---
drivers/gpu/drm/rockchip/rockchip_drm_drv.c | 8 ++++++--
drivers/gpu/drm/rockchip/rockchip_rgb.c | 7 ++++---
2 files changed, 10 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_drv.c b/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
index 212bd87c0c4a..b0d63a566501 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
@@ -270,11 +270,15 @@ int rockchip_drm_endpoint_is_subdriver(struct device_node *ep)
if (!node)
return -ENODEV;
- /* status disabled will prevent creation of platform-devices */
+ /*
+ * status disabled will prevent creation of platform-devices,
+ * but equally we can't rely on the driver having been registered
+ * yet (e.g. I2C bridges).
+ */
pdev = of_find_device_by_node(node);
of_node_put(node);
if (!pdev)
- return -ENODEV;
+ return -EPROBE_DEFER;
/*
* All rockchip subdrivers have probed at this point, so
diff --git a/drivers/gpu/drm/rockchip/rockchip_rgb.c b/drivers/gpu/drm/rockchip/rockchip_rgb.c
index c079714477d8..989595087397 100644
--- a/drivers/gpu/drm/rockchip/rockchip_rgb.c
+++ b/drivers/gpu/drm/rockchip/rockchip_rgb.c
@@ -77,7 +77,7 @@ struct rockchip_rgb *rockchip_rgb_init(struct device *dev,
struct drm_encoder *encoder;
struct device_node *port, *endpoint;
u32 endpoint_id;
- int ret = 0, child_count = 0;
+ int subret, ret = 0, child_count = 0;
struct drm_panel *panel;
struct drm_bridge *bridge;
@@ -96,8 +96,9 @@ struct rockchip_rgb *rockchip_rgb_init(struct device *dev,
if (of_property_read_u32(endpoint, "reg", &endpoint_id))
endpoint_id = 0;
- /* if subdriver (> 0) or error case (< 0), ignore entry */
- if (rockchip_drm_endpoint_is_subdriver(endpoint) != 0)
+ /* if subdriver (> 0) or non-defer error case (< 0), ignore entry */
+ subret = rockchip_drm_endpoint_is_subdriver(endpoint);
+ if (subret != 0 && subret != -EPROBE_DEFER)
continue;
child_count++;
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-03-16 18:29 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-16 18:27 Jonathan McDowell [this message]
2021-03-21 18:58 ` [PATCH] drm/rockchip: Cope with endpoints that haven't been registered yet Heiko Stuebner
2021-04-16 11:30 ` Jonathan McDowell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210316182753.GA25685@earth.li \
--to=noodles@earth.li \
--cc=airlied@linux.ie \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=heiko@sntech.de \
--cc=hjc@rock-chips.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).