linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: Liu Ying <victor.liu@nxp.com>
Cc: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-media@vger.kernel.org,
	airlied@linux.ie, daniel@ffwll.ch, shawnguo@kernel.org,
	s.hauer@pengutronix.de, kernel@pengutronix.de,
	festevam@gmail.com, linux-imx@nxp.com, mchehab@kernel.org,
	a.hajda@samsung.com, narmstrong@baylibre.com,
	Laurent.pinchart@ideasonboard.com, jonas@kwiboo.se,
	jernej.skrabec@siol.net, kishon@ti.com, vkoul@kernel.org,
	robert.foss@linaro.org, lee.jones@linaro.org
Subject: Re: [PATCH v5 07/14] dt-bindings: mfd: Add i.MX8qm/qxp Control and Status Registers module binding
Date: Tue, 16 Mar 2021 16:38:50 -0600	[thread overview]
Message-ID: <20210316223850.GA3806545@robh.at.kernel.org> (raw)
In-Reply-To: <1615370138-5673-8-git-send-email-victor.liu@nxp.com>

On Wed, Mar 10, 2021 at 05:55:31PM +0800, Liu Ying wrote:
> This patch adds bindings for i.MX8qm/qxp Control and Status Registers module.
> 
> Signed-off-by: Liu Ying <victor.liu@nxp.com>
> ---
> v4->v5:
> * Newly introduced in v5. (Rob)
> 
>  .../devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml   | 202 +++++++++++++++++++++
>  1 file changed, 202 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml
> 
> diff --git a/Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml b/Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml
> new file mode 100644
> index 00000000..0e724d9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml
> @@ -0,0 +1,202 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/fsl,imx8qxp-csr.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Freescale i.MX8qm/qxp Control and Status Registers Module Bindings
> +
> +maintainers:
> +  - Liu Ying <victor.liu@nxp.com>
> +
> +description: |
> +  As a system controller, the Freescale i.MX8qm/qxp Control and Status
> +  Registers(CSR) module represents a set of miscellaneous registers of a
> +  specific subsystem.  It may provide control and/or status report interfaces
> +  to a mix of standalone hardware devices within that subsystem.  One typical
> +  use-case is for some other nodes to acquire a reference to the syscon node
> +  by phandle, and the other typical use-case is that the operating system
> +  should consider all subnodes of the CSR module as separate child devices.
> +
> +select:
> +  properties:
> +    compatible:
> +      contains:
> +        enum:
> +          - fsl,imx8qxp-mipi-lvds-csr
> +          - fsl,imx8qm-lvds-csr

You shouldn't need this, we filter out 'syscon' and 'simple-mfd'.

> +  required:
> +    - compatible
> +
> +properties:
> +  $nodename:
> +    pattern: "^syscon@[0-9a-f]+$"
> +
> +  compatible:
> +    items:
> +      - enum:
> +          - fsl,imx8qxp-mipi-lvds-csr
> +          - fsl,imx8qm-lvds-csr
> +      - const: syscon
> +      - const: simple-mfd
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    const: ipg
> +
> +patternProperties:
> +  "^(ldb|phy|pxl2dpi)$":
> +    type: object
> +    description: The possible child devices of the CSR module.
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: fsl,imx8qxp-mipi-lvds-csr
> +    then:
> +      required:
> +        - pxl2dpi
> +        - ldb
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: fsl,imx8qm-lvds-csr
> +    then:
> +      required:
> +        - phy
> +        - ldb
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/imx8-lpcg.h>
> +    #include <dt-bindings/firmware/imx/rsrc.h>
> +    mipi_lvds_0_csr: syscon@56221000 {
> +        compatible = "fsl,imx8qxp-mipi-lvds-csr", "syscon", "simple-mfd";
> +        reg = <0x56221000 0x1000>;
> +        clocks = <&mipi_lvds_0_di_mipi_lvds_regs_lpcg IMX_LPCG_CLK_4>;
> +        clock-names = "ipg";
> +
> +        mipi_lvds_0_pxl2dpi: pxl2dpi {
> +            compatible = "fsl,imx8qxp-pxl2dpi";
> +            fsl,sc-resource = <IMX_SC_R_MIPI_0>;
> +            power-domains = <&pd IMX_SC_R_MIPI_0>;
> +
> +            ports {
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +
> +                port@0 {
> +                    #address-cells = <1>;
> +                    #size-cells = <0>;
> +                    reg = <0>;
> +
> +                    mipi_lvds_0_pxl2dpi_dc0_pixel_link0: endpoint@0 {
> +                        reg = <0>;
> +                        remote-endpoint = <&dc0_pixel_link0_mipi_lvds_0_pxl2dpi>;
> +                    };
> +
> +                    mipi_lvds_0_pxl2dpi_dc0_pixel_link1: endpoint@1 {
> +                        reg = <1>;
> +                        remote-endpoint = <&dc0_pixel_link1_mipi_lvds_0_pxl2dpi>;
> +                    };
> +                };
> +
> +                port@1 {
> +                    #address-cells = <1>;
> +                    #size-cells = <0>;
> +                    reg = <1>;
> +
> +                    mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0: endpoint@0 {
> +                        reg = <0>;
> +                        remote-endpoint = <&mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi>;
> +                    };
> +
> +                    mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1: endpoint@1 {
> +                        reg = <1>;
> +                        remote-endpoint = <&mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi>;
> +                    };
> +                };
> +            };
> +        };
> +
> +        mipi_lvds_0_ldb: ldb {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +            compatible = "fsl,imx8qxp-ldb";
> +            clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_MISC2>,
> +                     <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_BYPASS>;
> +            clock-names = "pixel", "bypass";
> +            power-domains = <&pd IMX_SC_R_LVDS_0>;
> +
> +            channel@0 {
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +                reg = <0>;
> +                phys = <&mipi_lvds_0_phy>;
> +                phy-names = "lvds_phy";
> +
> +                port@0 {
> +                    reg = <0>;
> +
> +                    mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi: endpoint {
> +                        remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0>;
> +                    };
> +                };
> +
> +                port@1 {
> +                    reg = <1>;
> +
> +                    /* ... */
> +                };
> +            };
> +
> +            channel@1 {
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +                reg = <1>;
> +                phys = <&mipi_lvds_0_phy>;
> +                phy-names = "lvds_phy";
> +
> +                port@0 {
> +                    reg = <0>;
> +
> +                    mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi: endpoint {
> +                        remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1>;
> +                    };
> +                };
> +
> +                port@1 {
> +                    reg = <1>;
> +
> +                    /* ... */
> +                };
> +            };
> +        };
> +    };
> +
> +    mipi_lvds_0_phy: phy@56228300 {
> +        compatible = "fsl,imx8qxp-mipi-dphy";
> +        reg = <0x56228300 0x100>;
> +        clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_PHY>;
> +        clock-names = "phy_ref";
> +        #phy-cells = <0>;
> +        fsl,syscon = <&mipi_lvds_0_csr>;
> +        power-domains = <&pd IMX_SC_R_MIPI_0>;
> +    };
> -- 
> 2.7.4
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2021-03-16 22:40 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-10  9:55 [PATCH v5 00/14] Add some DRM bridge drivers support for i.MX8qm/qxp SoCs Liu Ying
2021-03-10  9:55 ` [PATCH v5 01/14] media: uapi: Add some RGB bus formats for i.MX8qm/qxp pixel combiner Liu Ying
2021-03-10 13:45   ` Laurent Pinchart
2021-03-10  9:55 ` [PATCH v5 02/14] media: docs: " Liu Ying
2021-03-10 13:24   ` Laurent Pinchart
2021-03-11  5:26     ` Liu Ying
2021-03-10  9:55 ` [PATCH v5 03/14] dt-bindings: display: bridge: Add i.MX8qm/qxp pixel combiner binding Liu Ying
2021-03-10  9:55 ` [PATCH v5 04/14] drm/bridge: imx: Add i.MX8qm/qxp pixel combiner support Liu Ying
2021-03-10  9:55 ` [PATCH v5 05/14] dt-bindings: display: bridge: Add i.MX8qm/qxp display pixel link binding Liu Ying
2021-03-10  9:55 ` [PATCH v5 06/14] drm/bridge: imx: Add i.MX8qm/qxp display pixel link support Liu Ying
2021-03-10  9:55 ` [PATCH v5 07/14] dt-bindings: mfd: Add i.MX8qm/qxp Control and Status Registers module binding Liu Ying
2021-03-16 22:38   ` Rob Herring [this message]
2021-03-17  2:04     ` Liu Ying
2021-03-10  9:55 ` [PATCH v5 08/14] dt-bindings: display: bridge: Add i.MX8qxp pixel link to DPI binding Liu Ying
2021-03-16 22:40   ` Rob Herring
2021-03-10  9:55 ` [PATCH v5 09/14] drm/bridge: imx: Add i.MX8qxp pixel link to DPI support Liu Ying
2021-03-10  9:55 ` [PATCH v5 10/14] drm/bridge: imx: Add LDB driver helper support Liu Ying
2021-03-10  9:55 ` [PATCH v5 11/14] dt-bindings: display: bridge: Add i.MX8qm/qxp LVDS display bridge binding Liu Ying
2021-03-10  9:55 ` [PATCH v5 12/14] drm/bridge: imx: Add LDB support for i.MX8qxp Liu Ying
2021-03-10 12:16   ` kernel test robot
2021-03-10 19:38   ` kernel test robot
2021-03-10  9:55 ` [PATCH v5 13/14] drm/bridge: imx: Add LDB support for i.MX8qm Liu Ying
2021-03-10 13:25   ` kernel test robot
2021-03-10  9:55 ` [PATCH v5 14/14] MAINTAINERS: add maintainer for DRM bridge drivers for i.MX SoCs Liu Ying

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210316223850.GA3806545@robh.at.kernel.org \
    --to=robh@kernel.org \
    --cc=Laurent.pinchart@ideasonboard.com \
    --cc=a.hajda@samsung.com \
    --cc=airlied@linux.ie \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=festevam@gmail.com \
    --cc=jernej.skrabec@siol.net \
    --cc=jonas@kwiboo.se \
    --cc=kernel@pengutronix.de \
    --cc=kishon@ti.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=narmstrong@baylibre.com \
    --cc=robert.foss@linaro.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=victor.liu@nxp.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).