From: Yong Wu <yong.wu@mediatek.com>
To: Joerg Roedel <joro@8bytes.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
Will Deacon <will@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>,
Tomasz Figa <tfiga@chromium.com>,
<linux-mediatek@lists.infradead.org>,
<srv_heupstream@mediatek.com>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<iommu@lists.linux-foundation.org>,
Krzysztof Kozlowski <krzk@kernel.org>, <yong.wu@mediatek.com>,
<youlin.pei@mediatek.com>,
Nicolas Boichat <drinkcat@chromium.org>, <anan.sun@mediatek.com>,
<chao.hao@mediatek.com>
Subject: [PATCH 2/2] iommu/mediatek: Alloc building as module
Date: Tue, 23 Mar 2021 13:58:01 +0800 [thread overview]
Message-ID: <20210323055801.16885-2-yong.wu@mediatek.com> (raw)
In-Reply-To: <20210323055801.16885-1-yong.wu@mediatek.com>
The IOMMU in many SoC depends on the MM clocks and power-domain which
are device_initcall normally, thus the subsys_init here is not helpful.
This patch switches it to module_platform_driver which allow the
driver built as module.
Correspondingly switch the config to tristate.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
drivers/iommu/Kconfig | 2 +-
drivers/iommu/mtk_iommu.c | 16 ++++------------
2 files changed, 5 insertions(+), 13 deletions(-)
diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index bc93da48bed0..74f3e15edc14 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -349,7 +349,7 @@ config S390_AP_IOMMU
is not implemented as it is not necessary for VFIO.
config MTK_IOMMU
- bool "MTK IOMMU Support"
+ tristate "MediaTek IOMMU Support"
depends on ARCH_MEDIATEK || COMPILE_TEST
select ARM_DMA_USE_IOMMU
select IOMMU_API
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 6ecc007f07cd..a73ff3e20480 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -17,6 +17,7 @@
#include <linux/iopoll.h>
#include <linux/list.h>
#include <linux/mfd/syscon.h>
+#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/of_iommu.h>
#include <linux/of_irq.h>
@@ -1079,16 +1080,7 @@ static struct platform_driver mtk_iommu_driver = {
.pm = &mtk_iommu_pm_ops,
}
};
+module_platform_driver(mtk_iommu_driver);
-static int __init mtk_iommu_init(void)
-{
- int ret;
-
- ret = platform_driver_register(&mtk_iommu_driver);
- if (ret != 0)
- pr_err("Failed to register MTK IOMMU driver\n");
-
- return ret;
-}
-
-subsys_initcall(mtk_iommu_init)
+MODULE_DESCRIPTION("IOMMU API for MediaTek M4U implementations");
+MODULE_LICENSE("GPL v2");
--
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-03-23 6:01 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-23 5:58 [PATCH 1/2] iommu/mediatek-v1: Alloc building as module Yong Wu
2021-03-23 5:58 ` Yong Wu [this message]
2021-03-25 17:16 ` Will Deacon
2021-03-25 17:42 ` Robin Murphy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210323055801.16885-2-yong.wu@mediatek.com \
--to=yong.wu@mediatek.com \
--cc=anan.sun@mediatek.com \
--cc=chao.hao@mediatek.com \
--cc=drinkcat@chromium.org \
--cc=iommu@lists.linux-foundation.org \
--cc=joro@8bytes.org \
--cc=krzk@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=robin.murphy@arm.com \
--cc=srv_heupstream@mediatek.com \
--cc=tfiga@chromium.com \
--cc=will@kernel.org \
--cc=youlin.pei@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).