From: Yong Wu <yong.wu@mediatek.com>
To: Matthias Brugger <matthias.bgg@gmail.com>,
Joerg Roedel <joro@8bytes.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>
Cc: Evan Green <evgreen@chromium.org>,
Robin Murphy <robin.murphy@arm.com>,
Tomasz Figa <tfiga@chromium.org>,
Will Deacon <will.deacon@arm.com>,
<linux-mediatek@lists.infradead.org>,
<srv_heupstream@mediatek.com>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<iommu@lists.linux-foundation.org>, <yong.wu@mediatek.com>,
<youlin.pei@mediatek.com>,
Nicolas Boichat <drinkcat@chromium.org>,
Matthias Kaehlcke <mka@chromium.org>, <anan.sun@mediatek.com>,
<chao.hao@mediatek.com>, <ming-fan.chen@mediatek.com>,
<yi.kuo@mediatek.com>, <eizan@chromium.org>,
<acourbot@chromium.org>
Subject: [PATCH v5 03/16] iommu/mediatek: Add device_link between the consumer and the larb devices
Date: Sat, 10 Apr 2021 17:11:15 +0800 [thread overview]
Message-ID: <20210410091128.31823-4-yong.wu@mediatek.com> (raw)
In-Reply-To: <20210410091128.31823-1-yong.wu@mediatek.com>
MediaTek IOMMU-SMI diagram is like below. all the consumer connect with
smi-larb, then connect with smi-common.
M4U
|
smi-common
|
-------------
| | ...
| |
larb1 larb2
| |
vdec venc
When the consumer works, it should enable the smi-larb's power which
also need enable the smi-common's power firstly.
Thus, First of all, use the device link connect the consumer and the
smi-larbs. then add device link between the smi-larb and smi-common.
This patch adds device_link between the consumer and the larbs.
When device_link_add, I add the flag DL_FLAG_STATELESS to avoid calling
pm_runtime_xx to keep the original status of clocks. It can avoid two
issues:
1) Display HW show fastlogo abnormally reported in [1]. At the beggining,
all the clocks are enabled before entering kernel, but the clocks for
display HW(always in larb0) will be gated after clk_enable and clk_disable
called from device_link_add(->pm_runtime_resume) and rpm_idle. The clock
operation happened before display driver probe. At that time, the display
HW will be abnormal.
2) A deadlock issue reported in [2]. Use DL_FLAG_STATELESS to skip
pm_runtime_xx to avoid the deadlock.
Corresponding, DL_FLAG_AUTOREMOVE_CONSUMER can't be added, then
device_link_removed should be added explicitly.
[1] https://lore.kernel.org/linux-mediatek/1564213888.22908.4.camel@mhfsdcap03/
[2] https://lore.kernel.org/patchwork/patch/1086569/
Suggested-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
drivers/iommu/mtk_iommu.c | 22 ++++++++++++++++++++++
drivers/iommu/mtk_iommu_v1.c | 20 +++++++++++++++++++-
2 files changed, 41 insertions(+), 1 deletion(-)
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 7a7b8260d308..cd054bd3f0df 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -571,22 +571,44 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
{
struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
struct mtk_iommu_data *data;
+ struct device_link *link;
+ struct device *larbdev;
+ unsigned int larbid;
if (!fwspec || fwspec->ops != &mtk_iommu_ops)
return ERR_PTR(-ENODEV); /* Not a iommu client device */
data = dev_iommu_priv_get(dev);
+ /*
+ * Link the consumer device with the smi-larb device(supplier)
+ * The device in each a larb is a independent HW. thus only link
+ * one larb here.
+ */
+ larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
+ larbdev = data->larb_imu[larbid].dev;
+ link = device_link_add(dev, larbdev,
+ DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
+ if (!link)
+ dev_err(dev, "Unable to link %s\n", dev_name(larbdev));
return &data->iommu;
}
static void mtk_iommu_release_device(struct device *dev)
{
struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
+ struct mtk_iommu_data *data;
+ struct device *larbdev;
+ unsigned int larbid;
if (!fwspec || fwspec->ops != &mtk_iommu_ops)
return;
+ data = dev_iommu_priv_get(dev);
+ larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
+ larbdev = data->larb_imu[larbid].dev;
+ device_link_remove(dev, larbdev);
+
iommu_fwspec_free(dev);
}
diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
index a82466e4046e..43dbdf692894 100644
--- a/drivers/iommu/mtk_iommu_v1.c
+++ b/drivers/iommu/mtk_iommu_v1.c
@@ -425,7 +425,9 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
struct of_phandle_args iommu_spec;
struct of_phandle_iterator it;
struct mtk_iommu_data *data;
- int err;
+ struct device_link *link;
+ struct device *larbdev;
+ int err, larbid;
of_for_each_phandle(&it, err, dev->of_node, "iommus",
"#iommu-cells", -1) {
@@ -447,6 +449,14 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
data = dev_iommu_priv_get(dev);
+ /* Link the consumer device with the smi-larb device(supplier) */
+ larbid = mt2701_m4u_to_larb(fwspec->ids[0]);
+ larbdev = data->larb_imu[larbid].dev;
+ link = device_link_add(dev, larbdev,
+ DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
+ if (!link)
+ dev_err(dev, "Unable to link %s\n", dev_name(larbdev));
+
return &data->iommu;
}
@@ -467,10 +477,18 @@ static void mtk_iommu_probe_finalize(struct device *dev)
static void mtk_iommu_release_device(struct device *dev)
{
struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
+ struct mtk_iommu_data *data;
+ struct device *larbdev;
+ unsigned int larbid;
if (!fwspec || fwspec->ops != &mtk_iommu_ops)
return;
+ data = dev_iommu_priv_get(dev);
+ larbid = mt2701_m4u_to_larb(fwspec->ids[0]);
+ larbdev = data->larb_imu[larbid].dev;
+ device_link_remove(dev, larbdev);
+
iommu_fwspec_free(dev);
}
--
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-04-10 9:14 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-10 9:11 [PATCH v5 00/16] Clean up "mediatek,larb" Yong Wu
2021-04-10 9:11 ` [PATCH v5 01/16] dt-binding: mediatek: Get rid of mediatek, larb for multimedia HW Yong Wu
2021-04-10 9:11 ` [PATCH v5 02/16] iommu/mediatek: Add probe_defer for smi-larb Yong Wu
2021-04-10 9:11 ` Yong Wu [this message]
2021-04-10 9:11 ` [PATCH v5 04/16] memory: mtk-smi: Add device-link between smi-larb and smi-common Yong Wu
2021-04-10 12:40 ` Krzysztof Kozlowski
2021-04-13 6:04 ` Yong Wu
2021-04-13 14:58 ` Krzysztof Kozlowski
2021-04-10 9:11 ` [PATCH v5 05/16] media: mtk-jpeg: Use pm_runtime_resume_and_get for PM get_sync Yong Wu
2021-06-09 13:38 ` Matthias Brugger
2021-04-10 9:11 ` [PATCH v5 06/16] media: mtk-jpeg: Get rid of mtk_smi_larb_get/put Yong Wu
2021-04-10 9:11 ` [PATCH v5 07/16] media: mtk-mdp: Use pm_runtime_resume_and_get for PM get_sync Yong Wu
2021-04-10 9:11 ` [PATCH v5 08/16] media: mtk-mdp: Get rid of mtk_smi_larb_get/put Yong Wu
2021-06-08 9:35 ` houlong wei
2021-04-10 9:11 ` [PATCH v5 09/16] drm/mediatek: Use pm_runtime_resume_and_get for PM get_sync Yong Wu
2021-06-09 13:52 ` Matthias Brugger
2021-04-10 9:11 ` [PATCH v5 10/16] drm/mediatek: Add pm runtime support for ovl and rdma Yong Wu
2021-04-10 9:11 ` [PATCH v5 11/16] drm/mediatek: Get rid of mtk_smi_larb_get/put Yong Wu
2021-05-26 5:41 ` Dafna Hirschfeld
2021-06-10 12:00 ` Yong Wu
2021-04-10 9:11 ` [PATCH v5 12/16] media: mtk-vcodec: Use pm_runtime_resume_and_get for PM get_sync Yong Wu
2021-04-10 9:11 ` [PATCH v5 13/16] media: mtk-vcodec: Get rid of mtk_smi_larb_get/put Yong Wu
2021-05-12 9:20 ` Hsin-Yi Wang
2021-05-12 12:29 ` Yong Wu
2021-06-10 7:53 ` Matthias Brugger
2021-06-10 12:02 ` Yong Wu
2021-06-11 10:07 ` Matthias Brugger
2021-06-11 10:46 ` Joerg Roedel
2021-04-10 9:11 ` [PATCH v5 14/16] memory: mtk-smi: " Yong Wu
2021-04-13 14:04 ` Krzysztof Kozlowski
2021-06-09 14:42 ` Matthias Brugger
2021-04-10 9:11 ` [PATCH v5 15/16] arm: dts: mediatek: Get rid of mediatek, larb for MM nodes Yong Wu
2021-04-10 9:11 ` [PATCH v5 16/16] arm64: " Yong Wu
2021-04-13 14:58 ` (subset) [PATCH v5 00/16] Clean up "mediatek,larb" Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210410091128.31823-4-yong.wu@mediatek.com \
--to=yong.wu@mediatek.com \
--cc=acourbot@chromium.org \
--cc=anan.sun@mediatek.com \
--cc=chao.hao@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=drinkcat@chromium.org \
--cc=eizan@chromium.org \
--cc=evgreen@chromium.org \
--cc=iommu@lists.linux-foundation.org \
--cc=joro@8bytes.org \
--cc=krzk@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=ming-fan.chen@mediatek.com \
--cc=mka@chromium.org \
--cc=robh+dt@kernel.org \
--cc=robin.murphy@arm.com \
--cc=srv_heupstream@mediatek.com \
--cc=tfiga@chromium.org \
--cc=will.deacon@arm.com \
--cc=yi.kuo@mediatek.com \
--cc=youlin.pei@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).