linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Arnd Bergmann <arnd@kernel.org>
To: Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	Michal Simek <michal.simek@xilinx.com>,
	Punit Agrawal <punit1.agrawal@toshiba.co.jp>
Cc: Arnd Bergmann <arnd@arndb.de>, Rajan Vaja <rajan.vaja@xilinx.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Jolly Shah <jolly.shah@xilinx.com>,
	Quanyang Wang <quanyang.wang@windriver.com>,
	linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH] clk: zynqmp: fix compile testing without ZYNQMP_FIRMWARE
Date: Wed, 21 Apr 2021 15:48:36 +0200	[thread overview]
Message-ID: <20210421134844.3297838-1-arnd@kernel.org> (raw)

From: Arnd Bergmann <arnd@arndb.de>

When the firmware code is disabled, the incomplete error handling
in the clk driver causes compile-time warnings:

drivers/clk/zynqmp/pll.c: In function 'zynqmp_pll_recalc_rate':
drivers/clk/zynqmp/pll.c:147:29: error: 'fbdiv' is used uninitialized [-Werror=uninitialized]
  147 |         rate =  parent_rate * fbdiv;
      |                 ~~~~~~~~~~~~^~~~~~~
In function 'zynqmp_pll_get_mode',
    inlined from 'zynqmp_pll_recalc_rate' at drivers/clk/zynqmp/pll.c:148:6:
drivers/clk/zynqmp/pll.c:61:27: error: 'ret_payload' is used uninitialized [-Werror=uninitialized]
   61 |         return ret_payload[1];
      |                ~~~~~~~~~~~^~~
drivers/clk/zynqmp/pll.c: In function 'zynqmp_pll_recalc_rate':
drivers/clk/zynqmp/pll.c:53:13: note: 'ret_payload' declared here
   53 |         u32 ret_payload[PAYLOAD_ARG_CNT];
      |             ^~~~~~~~~~~
drivers/clk/zynqmp/clk-mux-zynqmp.c: In function 'zynqmp_clk_mux_get_parent':
drivers/clk/zynqmp/clk-mux-zynqmp.c:57:16: error: 'val' is used uninitialized [-Werror=uninitialized]
   57 |         return val;
      |                ^~~

As it was apparently intentional to support this for compile testing
purposes, change the code to have just enough error handling for the
compiler to not notice the remaining bugs.

Fixes: 21f237534661 ("clk: zynqmp: Drop dependency on ARCH_ZYNQMP")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 drivers/clk/zynqmp/clk-mux-zynqmp.c | 4 +++-
 drivers/clk/zynqmp/pll.c            | 8 ++++++--
 2 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/zynqmp/clk-mux-zynqmp.c b/drivers/clk/zynqmp/clk-mux-zynqmp.c
index 06194149be83..2afded3c7c11 100644
--- a/drivers/clk/zynqmp/clk-mux-zynqmp.c
+++ b/drivers/clk/zynqmp/clk-mux-zynqmp.c
@@ -50,9 +50,11 @@ static u8 zynqmp_clk_mux_get_parent(struct clk_hw *hw)
 
 	ret = zynqmp_pm_clock_getparent(clk_id, &val);
 
-	if (ret)
+	if (ret) {
 		pr_warn_once("%s() getparent failed for clock: %s, ret = %d\n",
 			     __func__, clk_name, ret);
+		return ret;
+	}
 
 	return val;
 }
diff --git a/drivers/clk/zynqmp/pll.c b/drivers/clk/zynqmp/pll.c
index abe6afbf3407..67d2a2d260c1 100644
--- a/drivers/clk/zynqmp/pll.c
+++ b/drivers/clk/zynqmp/pll.c
@@ -54,9 +54,11 @@ static inline enum pll_mode zynqmp_pll_get_mode(struct clk_hw *hw)
 	int ret;
 
 	ret = zynqmp_pm_get_pll_frac_mode(clk_id, ret_payload);
-	if (ret)
+	if (ret) {
 		pr_warn_once("%s() PLL get frac mode failed for %s, ret = %d\n",
 			     __func__, clk_name, ret);
+		return ret;
+	}
 
 	return ret_payload[1];
 }
@@ -140,9 +142,11 @@ static unsigned long zynqmp_pll_recalc_rate(struct clk_hw *hw,
 	int ret;
 
 	ret = zynqmp_pm_clock_getdivider(clk_id, &fbdiv);
-	if (ret)
+	if (ret) {
 		pr_warn_once("%s() get divider failed for %s, ret = %d\n",
 			     __func__, clk_name, ret);
+		return -1ul;
+	}
 
 	rate =  parent_rate * fbdiv;
 	if (zynqmp_pll_get_mode(hw) == PLL_MODE_FRAC) {
-- 
2.29.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2021-04-21 13:50 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-21 13:48 Arnd Bergmann [this message]
2021-04-22  5:48 ` [PATCH] clk: zynqmp: fix compile testing without ZYNQMP_FIRMWARE Punit Agrawal
2021-04-22 10:54   ` Michal Simek
2021-04-23  6:37     ` Punit Agrawal
2021-04-30  2:17       ` Stephen Boyd
2021-06-21 13:15         ` Michal Simek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210421134844.3297838-1-arnd@kernel.org \
    --to=arnd@kernel.org \
    --cc=arnd@arndb.de \
    --cc=gregkh@linuxfoundation.org \
    --cc=jolly.shah@xilinx.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=michal.simek@xilinx.com \
    --cc=mturquette@baylibre.com \
    --cc=punit1.agrawal@toshiba.co.jp \
    --cc=quanyang.wang@windriver.com \
    --cc=rajan.vaja@xilinx.com \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).