From: <patrice.chotard@foss.st.com>
To: Mark Brown <broonie@kernel.org>,
Miquel Raynal <miquel.raynal@bootlin.com>,
Vignesh Raghavendra <vigneshr@ti.com>,
Boris Brezillon <boris.brezillon@collabora.com>,
<linux-mtd@lists.infradead.org>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
<linux-spi@vger.kernel.org>,
<linux-stm32@st-md-mailman.stormreply.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Cc: <patrice.chotard@foss.st.com>, <christophe.kerello@foss.st.com>
Subject: [PATCH v3 2/3] mtd: spinand: use the spi-mem poll status APIs
Date: Tue, 18 May 2021 11:39:50 +0200 [thread overview]
Message-ID: <20210518093951.23136-3-patrice.chotard@foss.st.com> (raw)
In-Reply-To: <20210518093951.23136-1-patrice.chotard@foss.st.com>
From: Patrice Chotard <patrice.chotard@foss.st.com>
Make use of spi-mem poll status APIs to let advanced controllers
optimize wait operations.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
---
Changes in v3:
- Add initial_delay_us and polling_delay_us parameters to spinand_wait()
- Add SPINAND_READ/WRITE/ERASE/RESET_INITIAL_DELAY_US and
SPINAND_READ/WRITE/ERASE/RESET_POLL_DELAY_US defines.
Changes in v2:
- non-offload case is now managed by spi_mem_poll_status()
drivers/mtd/nand/spi/core.c | 45 ++++++++++++++++++++++++++-----------
include/linux/mtd/spinand.h | 11 ++++++++-
2 files changed, 42 insertions(+), 14 deletions(-)
diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index 17f63f95f4a2..ef2a692ab5b6 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -473,20 +473,26 @@ static int spinand_erase_op(struct spinand_device *spinand,
return spi_mem_exec_op(spinand->spimem, &op);
}
-static int spinand_wait(struct spinand_device *spinand, u8 *s)
+static int spinand_wait(struct spinand_device *spinand,
+ unsigned long initial_delay_us,
+ unsigned long poll_delay_us,
+ u8 *s)
{
- unsigned long timeo = jiffies + msecs_to_jiffies(400);
+ struct spi_mem_op op = SPINAND_GET_FEATURE_OP(REG_STATUS,
+ spinand->scratchbuf);
u8 status;
int ret;
- do {
- ret = spinand_read_status(spinand, &status);
- if (ret)
- return ret;
+ ret = spi_mem_poll_status(spinand->spimem, &op, STATUS_BUSY, 0,
+ initial_delay_us,
+ poll_delay_us,
+ SPINAND_STATUS_TIMEOUT_MS);
+ if (ret)
+ return ret;
- if (!(status & STATUS_BUSY))
- goto out;
- } while (time_before(jiffies, timeo));
+ status = *spinand->scratchbuf;
+ if (!(status & STATUS_BUSY))
+ goto out;
/*
* Extra read, just in case the STATUS_READY bit has changed
@@ -526,7 +532,10 @@ static int spinand_reset_op(struct spinand_device *spinand)
if (ret)
return ret;
- return spinand_wait(spinand, NULL);
+ return spinand_wait(spinand,
+ SPINAND_RESET_INITIAL_DELAY_US,
+ SPINAND_RESET_POLL_DELAY_US,
+ NULL);
}
static int spinand_lock_block(struct spinand_device *spinand, u8 lock)
@@ -549,7 +558,10 @@ static int spinand_read_page(struct spinand_device *spinand,
if (ret)
return ret;
- ret = spinand_wait(spinand, &status);
+ ret = spinand_wait(spinand,
+ SPINAND_READ_INITIAL_DELAY_US,
+ SPINAND_READ_POLL_DELAY_US,
+ &status);
if (ret < 0)
return ret;
@@ -585,7 +597,10 @@ static int spinand_write_page(struct spinand_device *spinand,
if (ret)
return ret;
- ret = spinand_wait(spinand, &status);
+ ret = spinand_wait(spinand,
+ SPINAND_WRITE_INITIAL_DELAY_US,
+ SPINAND_WRITE_POLL_DELAY_US,
+ &status);
if (!ret && (status & STATUS_PROG_FAILED))
return -EIO;
@@ -768,7 +783,11 @@ static int spinand_erase(struct nand_device *nand, const struct nand_pos *pos)
if (ret)
return ret;
- ret = spinand_wait(spinand, &status);
+ ret = spinand_wait(spinand,
+ SPINAND_ERASE_INITIAL_DELAY_US,
+ SPINAND_ERASE_POLL_DELAY_US,
+ &status);
+
if (!ret && (status & STATUS_ERASE_FAILED))
ret = -EIO;
diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
index 6bb92f26833e..180c1fa64e62 100644
--- a/include/linux/mtd/spinand.h
+++ b/include/linux/mtd/spinand.h
@@ -169,7 +169,16 @@
struct spinand_op;
struct spinand_device;
-#define SPINAND_MAX_ID_LEN 4
+#define SPINAND_MAX_ID_LEN 4
+#define SPINAND_READ_INITIAL_DELAY_US 6
+#define SPINAND_READ_POLL_DELAY_US 5
+#define SPINAND_RESET_INITIAL_DELAY_US 5
+#define SPINAND_RESET_POLL_DELAY_US 5
+#define SPINAND_WRITE_INITIAL_DELAY_US 75
+#define SPINAND_WRITE_POLL_DELAY_US 15
+#define SPINAND_ERASE_INITIAL_DELAY_US 250
+#define SPINAND_ERASE_POLL_DELAY_US 50
+#define SPINAND_STATUS_TIMEOUT_MS 400
/**
* struct spinand_id - SPI NAND id structure
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-05-18 9:47 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-18 9:39 [PATCH v3 0/3] MTD: spinand: Add spi_mem_poll_status() support patrice.chotard
2021-05-18 9:39 ` [PATCH v3 1/3] spi: spi-mem: add automatic poll status functions patrice.chotard
2021-05-18 11:30 ` Boris Brezillon
2021-05-18 11:50 ` Patrice CHOTARD
2021-05-18 11:40 ` Boris Brezillon
2021-05-18 11:54 ` Patrice CHOTARD
2021-05-18 9:39 ` patrice.chotard [this message]
2021-05-18 11:28 ` [PATCH v3 2/3] mtd: spinand: use the spi-mem poll status APIs Boris Brezillon
2021-05-18 11:50 ` Patrice CHOTARD
2021-05-18 9:39 ` [PATCH v3 3/3] spi: stm32-qspi: add automatic poll status feature patrice.chotard
2021-05-18 11:39 ` Boris Brezillon
2021-05-18 11:53 ` Patrice CHOTARD
2021-05-18 11:28 ` [PATCH v3 0/3] MTD: spinand: Add spi_mem_poll_status() support Patrice CHOTARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210518093951.23136-3-patrice.chotard@foss.st.com \
--to=patrice.chotard@foss.st.com \
--cc=alexandre.torgue@foss.st.com \
--cc=boris.brezillon@collabora.com \
--cc=broonie@kernel.org \
--cc=christophe.kerello@foss.st.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-spi@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=miquel.raynal@bootlin.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).