linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Rex-BC Chen <rex-bc.chen@mediatek.com>
To: <chunkuang.hu@kernel.org>, <matthias.bgg@gmail.com>
Cc: <devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>,
	<Project_Global_Chrome_Upstream_Group@mediatek.com>,
	Rex-BC Chen <rex-bc.chen@mediatek.com>,
	Jitao Shi <jitao.shi@mediatek.com>
Subject: [v5,PATCH 3/3] drm/mediatek: dpi: add bus format negotiation
Date: Wed, 26 May 2021 16:52:19 +0800	[thread overview]
Message-ID: <20210526085219.7582-4-rex-bc.chen@mediatek.com> (raw)
In-Reply-To: <20210526085219.7582-1-rex-bc.chen@mediatek.com>

Add the atomic_get_output_bus_fmts, atomic_get_input_bus_fmts to negotiate
the possible output and input formats for the current mode and monitor,
and use the negotiated formats in a basic atomic_check callback.

Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_dpi.c | 85 ++++++++++++++++++++++++++++--
 1 file changed, 80 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index a71f112e9a7a..6c77a9810011 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -549,6 +549,80 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
 	return 0;
 }
 
+static u32 *mtk_dpi_bridge_atomic_get_output_bus_fmts(struct drm_bridge *bridge,
+					struct drm_bridge_state *bridge_state,
+					struct drm_crtc_state *crtc_state,
+					struct drm_connector_state *conn_state,
+					unsigned int *num_output_fmts)
+{
+	struct mtk_dpi *dpi = bridge_to_dpi(bridge);
+	u32 *output_fmts;
+
+	*num_output_fmts = 0;
+
+	if (!dpi->conf->output_fmts) {
+		dev_err(dpi->dev, "output_fmts should not be null\n");
+		return NULL;
+	}
+
+	output_fmts = kcalloc(dpi->conf->num_output_fmts, sizeof(*output_fmts),
+			     GFP_KERNEL);
+	if (!output_fmts)
+		return NULL;
+
+	*num_output_fmts = dpi->conf->num_output_fmts;
+
+	memcpy(output_fmts, dpi->conf->output_fmts,
+	       sizeof(u32) * dpi->conf->num_output_fmts);
+
+	return output_fmts;
+}
+
+static u32 *mtk_dpi_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
+					struct drm_bridge_state *bridge_state,
+					struct drm_crtc_state *crtc_state,
+					struct drm_connector_state *conn_state,
+					u32 output_fmt,
+					unsigned int *num_input_fmts)
+{
+	u32 *input_fmts;
+
+	*num_input_fmts = 0;
+
+	input_fmts = kcalloc(1, sizeof(*input_fmts),
+			     GFP_KERNEL);
+	if (!input_fmts)
+		return NULL;
+
+	*num_input_fmts = 1;
+	input_fmts[0] = MEDIA_BUS_FMT_RGB888_1X24;
+
+	return input_fmts;
+}
+
+static int mtk_dpi_bridge_atomic_check(struct drm_bridge *bridge,
+				       struct drm_bridge_state *bridge_state,
+				       struct drm_crtc_state *crtc_state,
+				       struct drm_connector_state *conn_state)
+{
+	struct mtk_dpi *dpi = bridge->driver_private;
+	unsigned int out_bus_format;
+
+	out_bus_format = bridge_state->output_bus_cfg.format;
+
+	dev_dbg(dpi->dev, "input format 0x%04x, output format 0x%04x\n",
+		bridge_state->input_bus_cfg.format,
+		bridge_state->output_bus_cfg.format);
+
+	dpi->output_fmt = out_bus_format;
+	dpi->bit_num = MTK_DPI_OUT_BIT_NUM_8BITS;
+	dpi->channel_swap = MTK_DPI_OUT_CHANNEL_SWAP_RGB;
+	dpi->yc_map = MTK_DPI_OUT_YC_MAP_RGB;
+	dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB;
+
+	return 0;
+}
+
 static int mtk_dpi_bridge_attach(struct drm_bridge *bridge,
 				 enum drm_bridge_attach_flags flags)
 {
@@ -601,6 +675,12 @@ static const struct drm_bridge_funcs mtk_dpi_bridge_funcs = {
 	.mode_valid = mtk_dpi_bridge_mode_valid,
 	.disable = mtk_dpi_bridge_disable,
 	.enable = mtk_dpi_bridge_enable,
+	.atomic_check = mtk_dpi_bridge_atomic_check,
+	.atomic_get_output_bus_fmts = mtk_dpi_bridge_atomic_get_output_bus_fmts,
+	.atomic_get_input_bus_fmts = mtk_dpi_bridge_atomic_get_input_bus_fmts,
+	.atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
+	.atomic_reset = drm_atomic_helper_bridge_reset,
 };
 
 void mtk_dpi_start(struct device *dev)
@@ -647,11 +727,6 @@ static int mtk_dpi_bind(struct device *dev, struct device *master, void *data)
 	}
 	drm_connector_attach_encoder(dpi->connector, &dpi->encoder);
 
-	dpi->bit_num = MTK_DPI_OUT_BIT_NUM_8BITS;
-	dpi->channel_swap = MTK_DPI_OUT_CHANNEL_SWAP_RGB;
-	dpi->yc_map = MTK_DPI_OUT_YC_MAP_RGB;
-	dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB;
-
 	return 0;
 
 err_cleanup:
-- 
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2021-05-26  9:08 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-26  8:52 [v5,PATCH 0/3] mt8183 dpi supports dual edge Rex-BC Chen
2021-05-26  8:52 ` [v5,PATCH 1/3] drm/mediatek: dpi dual edge sample mode support Rex-BC Chen
2021-05-26  8:52 ` [v5, PATCH 2/3] drm/mediatek: config driver data to support dual edge sample Rex-BC Chen
2021-05-26  8:52 ` Rex-BC Chen [this message]
2021-06-04  1:03 ` [v5,PATCH 0/3] mt8183 dpi supports dual edge Chun-Kuang Hu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210526085219.7582-4-rex-bc.chen@mediatek.com \
    --to=rex-bc.chen@mediatek.com \
    --cc=Project_Global_Chrome_Upstream_Group@mediatek.com \
    --cc=chunkuang.hu@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jitao.shi@mediatek.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).