From: xiaobo <peterwillcn@gmail.com>
To: robh+dt@kernel.org, heiko@sntech.de, jagan@amarulasolutions.com
Cc: linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org,
xiaobo <peterwillcn@gmail.com>
Subject: [PATCH] arm64: dts: rockchip: arm64: make the system run light heartbeat
Date: Mon, 5 Jul 2021 12:25:18 +0800 [thread overview]
Message-ID: <20210705042518.73843-1-peterwillcn@gmail.com> (raw)
Make the system run light heartbeat, remove the wrong supply voltage.
Signed-off-by: xiaobo <peterwillcn@gmail.com>
---
.../boot/dts/rockchip/rk3399-nanopi-r4s.dts | 23 +++----------------
1 file changed, 3 insertions(+), 20 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
index fa5809887643..943f8d7c7909 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
@@ -1,7 +1,5 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
- * FriendlyElec NanoPC-T4 board device tree source
- *
* Copyright (c) 2020 FriendlyElec Computer Tech. Co., Ltd.
* (http://www.friendlyarm.com)
*
@@ -9,6 +7,7 @@
*
* Copyright (c) 2020 Jensen Huang <jensenhuang@friendlyarm.com>
* Copyright (c) 2020 Marty Jones <mj8263788@gmail.com>
+ * Copyright (C) 2020 Xiaobo Tian <peterwillcn@gmail.com>
* Copyright (c) 2021 Tianling Shen <cnsztl@gmail.com>
*/
@@ -24,20 +23,12 @@ / {
gpio-leds {
pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>;
- /delete-node/ led-0;
-
- lan_led: led-lan {
+ lan_led: led-1 {
gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
label = "green:lan";
};
- sys_led: led-sys {
- gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
- label = "red:sys";
- default-state = "on";
- };
-
- wan_led: led-wan {
+ wan_led: led-2 {
gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
label = "green:wan";
};
@@ -86,10 +77,6 @@ lan_led_pin: lan-led-pin {
rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
};
- sys_led_pin: sys-led-pin {
- rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
wan_led_pin: wan-led-pin {
rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
};
@@ -127,7 +114,3 @@ &uart0 {
&usbdrd_dwc3_0 {
dr_mode = "host";
};
-
-&vcc3v3_sys {
- vin-supply = <&vcc5v0_sys>;
-};
--
2.32.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-07-05 4:26 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-05 4:25 xiaobo [this message]
-- strict thread matches above, loose matches on Subject: below --
2021-07-05 5:06 [PATCH] arm64: dts: rockchip: arm64: make the system run light heartbeat xiaobo
2021-07-05 8:20 ` Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210705042518.73843-1-peterwillcn@gmail.com \
--to=peterwillcn@gmail.com \
--cc=heiko@sntech.de \
--cc=jagan@amarulasolutions.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).