linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Fabio Estevam <festevam@gmail.com>
To: shawnguo@kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
	frieder.schrempf@kontron.de, tharvey@gateworks.com,
	Fabio Estevam <festevam@gmail.com>
Subject: [PATCH 2/2] arm64: dts: imx8mm-venice: Fix the SPI chipselect polarity
Date: Fri, 16 Jul 2021 10:28:45 -0300	[thread overview]
Message-ID: <20210716132845.3371666-2-festevam@gmail.com> (raw)
In-Reply-To: <20210716132845.3371666-1-festevam@gmail.com>

The conversion of the spi-imx driver to use GPIO descriptors
in commit 8cdcd8aeee28 ("spi: imx/fsl-lpspi: Convert to GPIO descriptors")
helped to detect the following SPI chipselect polarity mismatch on an
imx6q-sabresd for example:
    
[    4.854337] m25p80@0 enforce active low on chipselect handle
   
Prior to the above commit, the chipselect polarity passed via cs-gpios
property was ignored and considered active-low.
    
The reason for such mismatch is clearly explained in the comments inside
drivers/gpio/gpiolib-of.c:
    
* SPI children have active low chip selects
* by default. This can be specified negatively
* by just omitting "spi-cs-high" in the
* device node, or actively by tagging on
* GPIO_ACTIVE_LOW as flag in the device
* tree. If the line is simultaneously
* tagged as active low in the device tree
* and has the "spi-cs-high" set, we get a
* conflict and the "spi-cs-high" flag will
* take precedence.
    
To properly represent the SPI chipselect polarity, change it to active-low
when the "spi-cs-high" property is absent.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
 arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi | 2 +-
 arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi | 2 +-
 arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
index 905b68a3daa5..138bb8c9bf56 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
@@ -57,7 +57,7 @@ reg_usb_otg1_vbus: regulator-usb-otg1 {
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_spi2>;
-	cs-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
index b7c91bdc21dd..27afa46a253a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
@@ -76,7 +76,7 @@ reg_usb_otg2_vbus: regulator-usb-otg2 {
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_spi2>;
-	cs-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
index d2ffd62a3bd4..a59e849c7be2 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
@@ -96,7 +96,7 @@ reg_wifi_en: regulator-wifi-en {
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_spi2>;
-	cs-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2021-07-16 13:31 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-16 13:28 [PATCH 1/2] arm64: dts: imx8mm-kontron-n801x-som: Fix the SPI chipselect polarity Fabio Estevam
2021-07-16 13:28 ` Fabio Estevam [this message]
2021-07-16 14:51   ` [PATCH 2/2] arm64: dts: imx8mm-venice: " Tim Harvey
2021-07-19 10:55 ` [PATCH 1/2] arm64: dts: imx8mm-kontron-n801x-som: " Frieder Schrempf
2021-08-14 13:25   ` Fabio Estevam
2021-09-22  1:22     ` Shawn Guo
2021-09-22  2:58 ` Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210716132845.3371666-2-festevam@gmail.com \
    --to=festevam@gmail.com \
    --cc=frieder.schrempf@kontron.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=shawnguo@kernel.org \
    --cc=tharvey@gateworks.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).