* [PATCH 4.19 099/421] media: I2C: change RST to "RSET" to fix multiple build errors
[not found] <20210719144946.310399455@linuxfoundation.org>
@ 2021-07-19 14:48 ` Greg Kroah-Hartman
2021-07-19 14:53 ` [PATCH 4.19 412/421] ARM: dts: imx6q-dhcom: Fix ethernet reset time properties Greg Kroah-Hartman
` (2 subsequent siblings)
3 siblings, 0 replies; 4+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-19 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Randy Dunlap, kernel test robot,
Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
NXP Linux Team, moderated for non-subscribers, Andrzej Hajda,
Sylwester Nawrocki, Sangwook Lee, Hans Verkuil,
Mauro Carvalho Chehab, Sasha Levin
From: Randy Dunlap <rdunlap@infradead.org>
[ Upstream commit 8edcb5049ac29aa3c8acc5ef15dd4036543d747e ]
The use of an enum named 'RST' conflicts with a #define macro
named 'RST' in arch/mips/include/asm/mach-rc32434/rb.h.
The MIPS use of RST was there first (AFAICT), so change the
media/i2c/ uses of RST to be named 'RSET'.
'git grep -w RSET' does not report any naming conflicts with the
new name.
This fixes multiple build errors:
arch/mips/include/asm/mach-rc32434/rb.h:15:14: error: expected identifier before '(' token
15 | #define RST (1 << 15)
| ^
drivers/media/i2c/s5c73m3/s5c73m3.h:356:2: note: in expansion of macro 'RST'
356 | RST,
| ^~~
../arch/mips/include/asm/mach-rc32434/rb.h:15:14: error: expected identifier before '(' token
15 | #define RST (1 << 15)
| ^
../drivers/media/i2c/s5k6aa.c:180:2: note: in expansion of macro 'RST'
180 | RST,
| ^~~
../arch/mips/include/asm/mach-rc32434/rb.h:15:14: error: expected identifier before '(' token
15 | #define RST (1 << 15)
| ^
../drivers/media/i2c/s5k5baf.c:238:2: note: in expansion of macro 'RST'
238 | RST,
| ^~~
and some others that I have trimmed.
Fixes: cac47f1822fc ("[media] V4L: Add S5C73M3 camera driver")
Fixes: 8b99312b7214 ("[media] Add v4l2 subdev driver for S5K4ECGX sensor")
Fixes: 7d459937dc09 ("[media] Add driver for Samsung S5K5BAF camera sensor")
Fixes: bfa8dd3a0524 ("[media] v4l: Add v4l2 subdev driver for S5K6AAFX sensor")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Sangwook Lee <sangwook.lee@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/i2c/s5c73m3/s5c73m3-core.c | 6 +++---
drivers/media/i2c/s5c73m3/s5c73m3.h | 2 +-
drivers/media/i2c/s5k4ecgx.c | 10 +++++-----
drivers/media/i2c/s5k5baf.c | 6 +++---
drivers/media/i2c/s5k6aa.c | 10 +++++-----
5 files changed, 17 insertions(+), 17 deletions(-)
diff --git a/drivers/media/i2c/s5c73m3/s5c73m3-core.c b/drivers/media/i2c/s5c73m3/s5c73m3-core.c
index ce196b60f917..37cb2f82c36b 100644
--- a/drivers/media/i2c/s5c73m3/s5c73m3-core.c
+++ b/drivers/media/i2c/s5c73m3/s5c73m3-core.c
@@ -1394,7 +1394,7 @@ static int __s5c73m3_power_on(struct s5c73m3 *state)
s5c73m3_gpio_deassert(state, STBY);
usleep_range(100, 200);
- s5c73m3_gpio_deassert(state, RST);
+ s5c73m3_gpio_deassert(state, RSET);
usleep_range(50, 100);
return 0;
@@ -1409,7 +1409,7 @@ static int __s5c73m3_power_off(struct s5c73m3 *state)
{
int i, ret;
- if (s5c73m3_gpio_assert(state, RST))
+ if (s5c73m3_gpio_assert(state, RSET))
usleep_range(10, 50);
if (s5c73m3_gpio_assert(state, STBY))
@@ -1614,7 +1614,7 @@ static int s5c73m3_get_platform_data(struct s5c73m3 *state)
state->mclk_frequency = pdata->mclk_frequency;
state->gpio[STBY] = pdata->gpio_stby;
- state->gpio[RST] = pdata->gpio_reset;
+ state->gpio[RSET] = pdata->gpio_reset;
return 0;
}
diff --git a/drivers/media/i2c/s5c73m3/s5c73m3.h b/drivers/media/i2c/s5c73m3/s5c73m3.h
index 653f68e7ea07..e267b2522149 100644
--- a/drivers/media/i2c/s5c73m3/s5c73m3.h
+++ b/drivers/media/i2c/s5c73m3/s5c73m3.h
@@ -361,7 +361,7 @@ struct s5c73m3_ctrls {
enum s5c73m3_gpio_id {
STBY,
- RST,
+ RSET,
GPIO_NUM,
};
diff --git a/drivers/media/i2c/s5k4ecgx.c b/drivers/media/i2c/s5k4ecgx.c
index 6ebcf254989a..75fb13a33eab 100644
--- a/drivers/media/i2c/s5k4ecgx.c
+++ b/drivers/media/i2c/s5k4ecgx.c
@@ -177,7 +177,7 @@ static const char * const s5k4ecgx_supply_names[] = {
enum s5k4ecgx_gpio_id {
STBY,
- RST,
+ RSET,
GPIO_NUM,
};
@@ -482,7 +482,7 @@ static int __s5k4ecgx_power_on(struct s5k4ecgx *priv)
if (s5k4ecgx_gpio_set_value(priv, STBY, priv->gpio[STBY].level))
usleep_range(30, 50);
- if (s5k4ecgx_gpio_set_value(priv, RST, priv->gpio[RST].level))
+ if (s5k4ecgx_gpio_set_value(priv, RSET, priv->gpio[RSET].level))
usleep_range(30, 50);
return 0;
@@ -490,7 +490,7 @@ static int __s5k4ecgx_power_on(struct s5k4ecgx *priv)
static int __s5k4ecgx_power_off(struct s5k4ecgx *priv)
{
- if (s5k4ecgx_gpio_set_value(priv, RST, !priv->gpio[RST].level))
+ if (s5k4ecgx_gpio_set_value(priv, RSET, !priv->gpio[RSET].level))
usleep_range(30, 50);
if (s5k4ecgx_gpio_set_value(priv, STBY, !priv->gpio[STBY].level))
@@ -878,7 +878,7 @@ static int s5k4ecgx_config_gpios(struct s5k4ecgx *priv,
int ret;
priv->gpio[STBY].gpio = -EINVAL;
- priv->gpio[RST].gpio = -EINVAL;
+ priv->gpio[RSET].gpio = -EINVAL;
ret = s5k4ecgx_config_gpio(gpio->gpio, gpio->level, "S5K4ECGX_STBY");
@@ -897,7 +897,7 @@ static int s5k4ecgx_config_gpios(struct s5k4ecgx *priv,
s5k4ecgx_free_gpios(priv);
return ret;
}
- priv->gpio[RST] = *gpio;
+ priv->gpio[RSET] = *gpio;
if (gpio_is_valid(gpio->gpio))
gpio_set_value(gpio->gpio, 0);
diff --git a/drivers/media/i2c/s5k5baf.c b/drivers/media/i2c/s5k5baf.c
index 5007c9659342..de3329f04fdf 100644
--- a/drivers/media/i2c/s5k5baf.c
+++ b/drivers/media/i2c/s5k5baf.c
@@ -238,7 +238,7 @@ struct s5k5baf_gpio {
enum s5k5baf_gpio_id {
STBY,
- RST,
+ RSET,
NUM_GPIOS,
};
@@ -973,7 +973,7 @@ static int s5k5baf_power_on(struct s5k5baf *state)
s5k5baf_gpio_deassert(state, STBY);
usleep_range(50, 100);
- s5k5baf_gpio_deassert(state, RST);
+ s5k5baf_gpio_deassert(state, RSET);
return 0;
err_reg_dis:
@@ -991,7 +991,7 @@ static int s5k5baf_power_off(struct s5k5baf *state)
state->apply_cfg = 0;
state->apply_crop = 0;
- s5k5baf_gpio_assert(state, RST);
+ s5k5baf_gpio_assert(state, RSET);
s5k5baf_gpio_assert(state, STBY);
if (!IS_ERR(state->clock))
diff --git a/drivers/media/i2c/s5k6aa.c b/drivers/media/i2c/s5k6aa.c
index 13c10b5e2b45..e9c6e41cd44d 100644
--- a/drivers/media/i2c/s5k6aa.c
+++ b/drivers/media/i2c/s5k6aa.c
@@ -181,7 +181,7 @@ static const char * const s5k6aa_supply_names[] = {
enum s5k6aa_gpio_id {
STBY,
- RST,
+ RSET,
GPIO_NUM,
};
@@ -845,7 +845,7 @@ static int __s5k6aa_power_on(struct s5k6aa *s5k6aa)
ret = s5k6aa->s_power(1);
usleep_range(4000, 5000);
- if (s5k6aa_gpio_deassert(s5k6aa, RST))
+ if (s5k6aa_gpio_deassert(s5k6aa, RSET))
msleep(20);
return ret;
@@ -855,7 +855,7 @@ static int __s5k6aa_power_off(struct s5k6aa *s5k6aa)
{
int ret;
- if (s5k6aa_gpio_assert(s5k6aa, RST))
+ if (s5k6aa_gpio_assert(s5k6aa, RSET))
usleep_range(100, 150);
if (s5k6aa->s_power) {
@@ -1514,7 +1514,7 @@ static int s5k6aa_configure_gpios(struct s5k6aa *s5k6aa,
int ret;
s5k6aa->gpio[STBY].gpio = -EINVAL;
- s5k6aa->gpio[RST].gpio = -EINVAL;
+ s5k6aa->gpio[RSET].gpio = -EINVAL;
gpio = &pdata->gpio_stby;
if (gpio_is_valid(gpio->gpio)) {
@@ -1537,7 +1537,7 @@ static int s5k6aa_configure_gpios(struct s5k6aa *s5k6aa,
if (ret < 0)
return ret;
- s5k6aa->gpio[RST] = *gpio;
+ s5k6aa->gpio[RSET] = *gpio;
}
return 0;
--
2.30.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH 4.19 414/421] ARM: dts: imx6q-dhcom: Add gpios pinctrl for i2c bus recovery
[not found] <20210719144946.310399455@linuxfoundation.org>
` (2 preceding siblings ...)
2021-07-19 14:53 ` [PATCH 4.19 413/421] ARM: dts: imx6q-dhcom: Fix ethernet plugin detection problems Greg Kroah-Hartman
@ 2021-07-19 14:53 ` Greg Kroah-Hartman
3 siblings, 0 replies; 4+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-19 14:53 UTC (permalink / raw)
To: linux-kernel, linux-arm-kernel
Cc: Greg Kroah-Hartman, stable, Christoph Niedermaier, Shawn Guo,
Fabio Estevam, Marek Vasut, NXP Linux Team, kernel, Sasha Levin
From: Christoph Niedermaier <cniedermaier@dh-electronics.com>
[ Upstream commit ddc873cd3c0af4faad6a00bffda21c3f775126dd ]
The i2c bus can freeze at the end of transaction so the bus can no longer work.
This scenario is improved by adding scl/sda gpios definitions to implement the
i2c bus recovery mechanism.
Fixes: 52c7a088badd ("ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2")
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Marek Vasut <marex@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: kernel@dh-electronics.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/imx6q-dhcom-som.dtsi | 36 +++++++++++++++++++++++---
1 file changed, 33 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
index 6c08ef354a39..d5161c34a4b1 100644
--- a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
@@ -106,22 +106,31 @@
&i2c1 {
clock-frequency = <100000>;
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
};
&i2c2 {
clock-frequency = <100000>;
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c2>;
+ pinctrl-1 = <&pinctrl_i2c2_gpio>;
+ scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
};
&i2c3 {
clock-frequency = <100000>;
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c3>;
+ pinctrl-1 = <&pinctrl_i2c3_gpio>;
+ scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
ltc3676: pmic@3c {
@@ -287,6 +296,13 @@
>;
};
+ pinctrl_i2c1_gpio: i2c1-gpio-grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x4001b8b1
+ >;
+ };
+
pinctrl_i2c2: i2c2-grp {
fsl,pins = <
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
@@ -294,6 +310,13 @@
>;
};
+ pinctrl_i2c2_gpio: i2c2-gpio-grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x4001b8b1
+ >;
+ };
+
pinctrl_i2c3: i2c3-grp {
fsl,pins = <
MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
@@ -301,6 +324,13 @@
>;
};
+ pinctrl_i2c3_gpio: i2c3-gpio-grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b8b1
+ >;
+ };
+
pinctrl_pmic_hw300: pmic-hw300-grp {
fsl,pins = <
MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1B0B0
--
2.30.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 4+ messages in thread