[PATCH AUTOSEL 5.4 2/9] spi: stm32h7: fix full duplex irq handler handling

[PATCH AUTOSEL 5.4 2/9] spi: stm32h7: fix full duplex irq handler handling

[Sasha Levin]

From: Alain Volmat <alain.volmat@foss.st.com>

[ Upstream commit e4a5c19888a5f8a9390860ca493e643be58c8791 ]

In case of Full-Duplex mode, DXP flag is set when RXP and TXP flags are
set. But to avoid 2 different handlings, just add TXP and RXP flag in
the mask instead of DXP, and then keep the initial handling of TXP and
RXP events.
Also rephrase comment about EOTIE which is one of the interrupt enable
bits. It is not triggered by any event.

Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/1625042723-661-3-git-send-email-alain.volmat@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-stm32.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c
index 3af6a5a3a4b2..92bf667951b0 100644
--- a/drivers/spi/spi-stm32.c
+++ b/drivers/spi/spi-stm32.c
@@ -913,15 +913,18 @@ static irqreturn_t stm32h7_spi_irq_thread(int irq, void *dev_id)
 	ier = readl_relaxed(spi->base + STM32H7_SPI_IER);
 
 	mask = ier;
-	/* EOTIE is triggered on EOT, SUSP and TXC events. */
+	/*
+	 * EOTIE enables irq from EOT, SUSP and TXC events. We need to set
+	 * SUSP to acknowledge it later. TXC is automatically cleared
+	 */
+
 	mask |= STM32H7_SPI_SR_SUSP;
 	/*
-	 * When TXTF is set, DXPIE and TXPIE are cleared. So in case of
-	 * Full-Duplex, need to poll RXP event to know if there are remaining
-	 * data, before disabling SPI.
+	 * DXPIE is set in Full-Duplex, one IT will be raised if TXP and RXP
+	 * are set. So in case of Full-Duplex, need to poll TXP and RXP event.
 	 */
-	if (spi->rx_buf && !spi->cur_usedma)
-		mask |= STM32H7_SPI_SR_RXP;
+	if ((spi->cur_comm == SPI_FULL_DUPLEX) && !spi->cur_usedma)
+		mask |= STM32H7_SPI_SR_TXP | STM32H7_SPI_SR_RXP;
 
 	if (!(sr & mask)) {
 		dev_warn(spi->dev, "spurious IT (sr=0x%08x, ier=0x%08x)\n",
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 6/9] mt7530 fix mt7530_fdb_write vid missing ivl bit

[Sasha Levin]

From: Eric Woudstra <ericwouds@gmail.com>

[ Upstream commit 11d8d98cbeef1496469b268d79938b05524731e8 ]

According to reference guides mt7530 (mt7620) and mt7531:

NOTE: When IVL is reset, MAC[47:0] and FID[2:0] will be used to
read/write the address table. When IVL is set, MAC[47:0] and CVID[11:0]
will be used to read/write the address table.

Since the function only fills in CVID and no FID, we need to set the
IVL bit. The existing code does not set it.

This is a fix for the issue I dropped here earlier:

http://lists.infradead.org/pipermail/linux-mediatek/2021-June/025697.html

With this patch, it is now possible to delete the 'self' fdb entry
manually. However, wifi roaming still has the same issue, the entry
does not get deleted automatically. Wifi roaming also needs a fix
somewhere else to function correctly in combination with vlan.

Signed-off-by: Eric Woudstra <ericwouds@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/mt7530.c | 1 +
 drivers/net/dsa/mt7530.h | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 071e5015bf91..04531b36b217 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -353,6 +353,7 @@ mt7530_fdb_write(struct mt7530_priv *priv, u16 vid,
 	int i;
 
 	reg[1] |= vid & CVID_MASK;
+	reg[1] |= ATA2_IVL;
 	reg[2] |= (aging & AGE_TIMER_MASK) << AGE_TIMER;
 	reg[2] |= (port_mask & PORT_MAP_MASK) << PORT_MAP;
 	/* STATIC_ENT indicate that entry is static wouldn't
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index 3ef7b5a6fc22..a9ef790578ba 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -43,6 +43,7 @@ enum {
 #define  STATIC_EMP			0
 #define  STATIC_ENT			3
 #define MT7530_ATA2			0x78
+#define  ATA2_IVL			BIT(15)
 
 /* Register for address table write data */
 #define MT7530_ATWD			0x7c
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel