From: Jonathan Cameron <jic23@kernel.org>
To: William Breathitt Gray <vilhelm.gray@gmail.com>
Cc: linux-stm32@st-md-mailman.stormreply.com, kernel@pengutronix.de,
a.fatoum@pengutronix.de, kamel.bouhara@bootlin.com,
gwendal@chromium.org, alexandre.belloni@bootlin.com,
david@lechnology.com, linux-iio@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, syednwaris@gmail.com,
patrick.havelange@essensium.com, fabrice.gasnier@st.com,
mcoquelin.stm32@gmail.com, alexandre.torgue@st.com,
o.rempel@pengutronix.de, jarkko.nikula@linux.intel.com,
Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Subject: Re: [PATCH v14 02/17] counter: Return error code on invalid modes
Date: Sun, 8 Aug 2021 18:07:11 +0100 [thread overview]
Message-ID: <20210808180711.0b359e79@jic23-huawei> (raw)
In-Reply-To: <7af82d4e39610da11edce0ee370285fe1cb1eac8.1627990337.git.vilhelm.gray@gmail.com>
On Tue, 3 Aug 2021 21:06:12 +0900
William Breathitt Gray <vilhelm.gray@gmail.com> wrote:
> Only a select set of modes (function, action, etc.) are valid for a
> given device configuration. This patch ensures that invalid modes result
> in a return -EINVAL. Such a situation should never occur in reality, but
> it's good to define a default switch case for the sake of making the
> intent of the code clear.
>
> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com>
> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
> Cc: Alexandre Torgue <alexandre.torgue@st.com>
> Acked-by: David Lechner <david@lechnology.com>
> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com>
> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Applied,
Thanks,
> ---
> drivers/counter/104-quad-8.c | 20 ++++++++++++------
> drivers/counter/microchip-tcb-capture.c | 6 ++++++
> drivers/counter/stm32-lptimer-cnt.c | 10 +++++----
> drivers/counter/ti-eqep.c | 27 +++++++++++++++----------
> 4 files changed, 42 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/counter/104-quad-8.c b/drivers/counter/104-quad-8.c
> index 81f9642777fb..b358b2b2b883 100644
> --- a/drivers/counter/104-quad-8.c
> +++ b/drivers/counter/104-quad-8.c
> @@ -273,6 +273,10 @@ static int quad8_function_set(struct counter_device *counter,
> *scale = 2;
> mode_cfg |= QUAD8_CMR_QUADRATURE_X4;
> break;
> + default:
> + /* should never reach this path */
> + mutex_unlock(&priv->lock);
> + return -EINVAL;
> }
> }
>
> @@ -349,7 +353,7 @@ static int quad8_action_get(struct counter_device *counter,
> case QUAD8_COUNT_FUNCTION_PULSE_DIRECTION:
> if (synapse->signal->id == signal_a_id)
> *action = QUAD8_SYNAPSE_ACTION_RISING_EDGE;
> - break;
> + return 0;
> case QUAD8_COUNT_FUNCTION_QUADRATURE_X1:
> if (synapse->signal->id == signal_a_id) {
> quad8_direction_get(counter, count, &direction);
> @@ -359,17 +363,18 @@ static int quad8_action_get(struct counter_device *counter,
> else
> *action = QUAD8_SYNAPSE_ACTION_FALLING_EDGE;
> }
> - break;
> + return 0;
> case QUAD8_COUNT_FUNCTION_QUADRATURE_X2:
> if (synapse->signal->id == signal_a_id)
> *action = QUAD8_SYNAPSE_ACTION_BOTH_EDGES;
> - break;
> + return 0;
> case QUAD8_COUNT_FUNCTION_QUADRATURE_X4:
> *action = QUAD8_SYNAPSE_ACTION_BOTH_EDGES;
> - break;
> + return 0;
> + default:
> + /* should never reach this path */
> + return -EINVAL;
> }
> -
> - return 0;
> }
>
> static const struct counter_ops quad8_ops = {
> @@ -529,6 +534,9 @@ static int quad8_count_mode_set(struct counter_device *counter,
> case COUNTER_COUNT_MODE_MODULO_N:
> cnt_mode = 3;
> break;
> + default:
> + /* should never reach this path */
> + return -EINVAL;
> }
>
> mutex_lock(&priv->lock);
> diff --git a/drivers/counter/microchip-tcb-capture.c b/drivers/counter/microchip-tcb-capture.c
> index 51b8af80f98b..0c9a61962911 100644
> --- a/drivers/counter/microchip-tcb-capture.c
> +++ b/drivers/counter/microchip-tcb-capture.c
> @@ -133,6 +133,9 @@ static int mchp_tc_count_function_set(struct counter_device *counter,
> bmr |= ATMEL_TC_QDEN | ATMEL_TC_POSEN;
> cmr |= ATMEL_TC_ETRGEDG_RISING | ATMEL_TC_ABETRG | ATMEL_TC_XC0;
> break;
> + default:
> + /* should never reach this path */
> + return -EINVAL;
> }
>
> regmap_write(priv->regmap, ATMEL_TC_BMR, bmr);
> @@ -226,6 +229,9 @@ static int mchp_tc_count_action_set(struct counter_device *counter,
> case MCHP_TC_SYNAPSE_ACTION_BOTH_EDGE:
> edge = ATMEL_TC_ETRGEDG_BOTH;
> break;
> + default:
> + /* should never reach this path */
> + return -EINVAL;
> }
>
> return regmap_write_bits(priv->regmap,
> diff --git a/drivers/counter/stm32-lptimer-cnt.c b/drivers/counter/stm32-lptimer-cnt.c
> index c19d998df5ba..78f383b77bd2 100644
> --- a/drivers/counter/stm32-lptimer-cnt.c
> +++ b/drivers/counter/stm32-lptimer-cnt.c
> @@ -206,9 +206,10 @@ static int stm32_lptim_cnt_function_set(struct counter_device *counter,
> priv->quadrature_mode = 1;
> priv->polarity = STM32_LPTIM_SYNAPSE_ACTION_BOTH_EDGES;
> return 0;
> + default:
> + /* should never reach this path */
> + return -EINVAL;
> }
> -
> - return -EINVAL;
> }
>
> static ssize_t stm32_lptim_cnt_enable_read(struct counter_device *counter,
> @@ -326,9 +327,10 @@ static int stm32_lptim_cnt_action_get(struct counter_device *counter,
> case STM32_LPTIM_ENCODER_BOTH_EDGE:
> *action = priv->polarity;
> return 0;
> + default:
> + /* should never reach this path */
> + return -EINVAL;
> }
> -
> - return -EINVAL;
> }
>
> static int stm32_lptim_cnt_action_set(struct counter_device *counter,
> diff --git a/drivers/counter/ti-eqep.c b/drivers/counter/ti-eqep.c
> index 65df9ef5b5bc..c303eb17c111 100644
> --- a/drivers/counter/ti-eqep.c
> +++ b/drivers/counter/ti-eqep.c
> @@ -157,7 +157,7 @@ static int ti_eqep_action_get(struct counter_device *counter,
> * QEPA and QEPB trigger QCLK.
> */
> *action = TI_EQEP_SYNAPSE_ACTION_BOTH_EDGES;
> - break;
> + return 0;
> case TI_EQEP_COUNT_FUNC_DIR_COUNT:
> /* In direction-count mode only rising edge of QEPA is counted
> * and QEPB gives direction.
> @@ -165,12 +165,14 @@ static int ti_eqep_action_get(struct counter_device *counter,
> switch (synapse->signal->id) {
> case TI_EQEP_SIGNAL_QEPA:
> *action = TI_EQEP_SYNAPSE_ACTION_RISING_EDGE;
> - break;
> - default:
> + return 0;
> + case TI_EQEP_SIGNAL_QEPB:
> *action = TI_EQEP_SYNAPSE_ACTION_NONE;
> - break;
> + return 0;
> + default:
> + /* should never reach this path */
> + return -EINVAL;
> }
> - break;
> case TI_EQEP_COUNT_FUNC_UP_COUNT:
> case TI_EQEP_COUNT_FUNC_DOWN_COUNT:
> /* In up/down-count modes only QEPA is counted and QEPB is not
> @@ -186,15 +188,18 @@ static int ti_eqep_action_get(struct counter_device *counter,
> *action = TI_EQEP_SYNAPSE_ACTION_BOTH_EDGES;
> else
> *action = TI_EQEP_SYNAPSE_ACTION_RISING_EDGE;
> - break;
> - default:
> + return 0;
> + case TI_EQEP_SIGNAL_QEPB:
> *action = TI_EQEP_SYNAPSE_ACTION_NONE;
> - break;
> + return 0;
> + default:
> + /* should never reach this path */
> + return -EINVAL;
> }
> - break;
> + default:
> + /* should never reach this path */
> + return -EINVAL;
> }
> -
> - return 0;
> }
>
> static const struct counter_ops ti_eqep_counter_ops = {
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-08-08 17:07 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-03 12:06 [PATCH v14 00/17] Introduce the Counter character device interface William Breathitt Gray
2021-08-03 12:06 ` [PATCH v14 01/17] counter: 104-quad-8: Return error when invalid mode during ceiling_write William Breathitt Gray
2021-08-08 17:06 ` Jonathan Cameron
2021-08-03 12:06 ` [PATCH v14 02/17] counter: Return error code on invalid modes William Breathitt Gray
2021-08-08 17:07 ` Jonathan Cameron [this message]
2021-08-03 12:06 ` [PATCH v14 03/17] counter: Standardize to ERANGE for limit exceeded errors William Breathitt Gray
2021-08-08 17:08 ` Jonathan Cameron
2021-08-03 12:06 ` [PATCH v14 04/17] counter: Rename counter_signal_value to counter_signal_level William Breathitt Gray
2021-08-08 17:10 ` Jonathan Cameron
2021-08-03 12:06 ` [PATCH v14 05/17] counter: Rename counter_count_function to counter_function William Breathitt Gray
2021-08-08 17:15 ` Jonathan Cameron
2021-08-03 12:06 ` [PATCH v14 07/17] counter: Update counter.h comments to reflect sysfs internalization William Breathitt Gray
2021-08-03 12:06 ` [PATCH v14 08/17] docs: counter: Update " William Breathitt Gray
2021-08-03 12:06 ` [PATCH v14 09/17] counter: Move counter enums to uapi header William Breathitt Gray
2021-08-03 12:06 ` [PATCH v14 10/17] counter: Add character device interface William Breathitt Gray
2021-08-03 12:06 ` [PATCH v14 11/17] docs: counter: Document " William Breathitt Gray
2021-08-03 12:06 ` [PATCH v14 12/17] tools/counter: Create Counter tools William Breathitt Gray
2021-08-03 12:06 ` [PATCH v14 13/17] counter: Implement signalZ_action_component_id sysfs attribute William Breathitt Gray
2021-08-03 12:06 ` [PATCH v14 14/17] counter: Implement *_component_id sysfs attributes William Breathitt Gray
2021-08-03 12:06 ` [PATCH v14 15/17] counter: Implement events_queue_size sysfs attribute William Breathitt Gray
2021-08-03 12:06 ` [PATCH v14 16/17] counter: 104-quad-8: Replace mutex with spinlock William Breathitt Gray
2021-08-03 12:06 ` [PATCH v14 17/17] counter: 104-quad-8: Add IRQ support for the ACCES 104-QUAD-8 William Breathitt Gray
[not found] ` <2df092636a9eea5a3ddae1e9a6429e32b51284f7.1627990337.git.vilhelm.gray@gmail.com>
[not found] ` <20210808182325.2620de00@jic23-huawei>
2021-08-09 3:59 ` [PATCH v14 06/17] counter: Internalize sysfs interface code William Breathitt Gray
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210808180711.0b359e79@jic23-huawei \
--to=jic23@kernel.org \
--cc=a.fatoum@pengutronix.de \
--cc=alexandre.belloni@bootlin.com \
--cc=alexandre.torgue@st.com \
--cc=david@lechnology.com \
--cc=fabrice.gasnier@foss.st.com \
--cc=fabrice.gasnier@st.com \
--cc=gwendal@chromium.org \
--cc=jarkko.nikula@linux.intel.com \
--cc=kamel.bouhara@bootlin.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=o.rempel@pengutronix.de \
--cc=patrick.havelange@essensium.com \
--cc=syednwaris@gmail.com \
--cc=vilhelm.gray@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox