linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Szabolcs Nagy <szabolcs.nagy@arm.com>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Mark Brown <broonie@kernel.org>,
	linux-arm-kernel@lists.infradead.org,
	Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will@kernel.org>,
	benh@amazon.com
Subject: Re: ucontext, kernel vs. userspace (glibc)
Date: Fri, 3 Sep 2021 12:02:50 +0100	[thread overview]
Message-ID: <20210903110250.GE21740@arm.com> (raw)
In-Reply-To: <ba3f8cda482dfa650af5dd3d1e95376e18bcd324.camel@kernel.crashing.org>

The 09/03/2021 17:14, Benjamin Herrenschmidt wrote:
> On Thu, 2021-09-02 at 13:42 +0100, Mark Brown wrote:
> > On Mon, Aug 30, 2021 at 08:40:03PM +1000, Benjamin Herrenschmidt wrote:
> > 
> > > So I'm discovering arm64 intricacies and today, as I was looking at SVE
> > > support (in the context of distro glibc backports.. don't ask), I
> > > noticed that glibc has no provision for dealing with kernel generated
> > > ucontext's in its {get,set,swap}_context functions...
> > > (It says so explicitly in the code unless I misunderstood).
> > > So one thing we did to "solve" this on ppc64 a while ago was to create
> > > a swapcontext syscall which can operate as all 3 operations (you can
> > > have NULL arguments), which also handles the sigprocmask (bonus:
> > > atomically with the context get/set from a userspace perspective).
> > > Would it make sense to do something similar on aarch64 ? (And have
> > > glibc then exploit it).
> > 
> > I think the usefulness of such an interface is mainly a question for
> > userspace - I don't immediately see any issue with implementing it if
> > it's useful to people.
> 
> Well, the problem as far as I can tell is that the glibc implementation
> of these today. They support "FPSIMD" but that's about it (so no SVE or
> anything else) along with a comment:
> 
> 	/* Check for FP SIMD context.  We don't support restoring
> 	   contexts created by the kernel, so this context must have
> 	   been created by getcontext.  Hence we can rely on the
> 	   first extension block being the FP SIMD context.  */
> 
> That said, a bit of reading around seems to indicate that the
> expecation of being able to setcontext() back to a signal handler
> generated context has been deprecated by the standard and broken on x86
> for a while in Linux, so I suppose that is less of an issue.

yes, setcontext is not expected to work with kernel
context.

> 
> That said, there is still some advantage in letting the kernel
> implement these as it would allow the kernel to support various
> "extensions" such as SVE (as long as there is room) transparently
> without having to change glibc.
> 
> In fact, isn't it possible for glibc to define its own ucontext
> structure for applications to use that can potentially have a larger
> reserved area ? By passing that size to the syscall, you can
> essentially get userspace ready for future extensions... within limits.

i think this can be a discussion for libc-alpha, but
i don't think there is interest in using the libc
context functions with kernel signal contexts,
that turned out to be problematic historically.
but if there is a use-case that can be discussed.

> 
> > > The hard-to-solve thing is the case where the SVE context spills
> > > outside of the ucontext itself, in the extra room on the stack, since
> > > programs that "now" about ucontext will not have allocated space for
> > > that, so that's more/less a lost cause already.
> > 
> > You can figure out the maximum possible size for a context so it would
> > be possible to define a mechanism for pointing to extra data I guess but
> > yeah, it's going to be a problem when we start seeing systems with large
> > enough register state.
> 
> Extra data for userspace generated ucontext's isn't going to fly much,
> there's really no "place" to put it (those things can be part of
> structures etc...) and no "hook" to allocate/free sub structures.
> 
> So you need whatever struct ucontext is used in userspace to be big
> enough.
> 
> That said, I think the current one might be enough for sve512 (I need
> to check) and we could have glibc define something much bigger (16KB ?)
> without much damage I suspect.
> 
> Nagyu ? What do you think ?

i think we only want to change set/get/swapcontext
if there is a use-case for this. currently only
a small bit of fp state has to be saved/restored.
and there can be security concerns since we have
features like bti that limits where one can jump
(arbitrary pc in setcontext does not work).

> 
> Cheers,
> Ben.
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2021-09-03 11:06 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-30 10:40 ucontext, kernel vs. userspace (glibc) Benjamin Herrenschmidt
2021-08-31 17:44 ` Catalin Marinas
2021-09-02 12:42 ` Mark Brown
2021-09-03  7:14   ` Benjamin Herrenschmidt
2021-09-03 11:02     ` Szabolcs Nagy [this message]
2021-09-03 12:25     ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210903110250.GE21740@arm.com \
    --to=szabolcs.nagy@arm.com \
    --cc=benh@amazon.com \
    --cc=benh@kernel.crashing.org \
    --cc=broonie@kernel.org \
    --cc=catalin.marinas@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).