From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Tim Harvey <tharvey@gateworks.com>,
Shawn Guo <shawnguo@kernel.org>, Sasha Levin <sashal@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH AUTOSEL 5.13 136/219] arm64: dts: imx8mm-venice-gw700x: fix invalid pmic pin config
Date: Thu, 9 Sep 2021 07:45:12 -0400 [thread overview]
Message-ID: <20210909114635.143983-136-sashal@kernel.org> (raw)
In-Reply-To: <20210909114635.143983-1-sashal@kernel.org>
From: Tim Harvey <tharvey@gateworks.com>
[ Upstream commit 500659f3b401fe6ffd1d63f2449d16d8a4204db7 ]
The GW700x PMIC does not have an interrupt. Remove the invalid pin
config.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi | 8 --------
1 file changed, 8 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
index 11dda79cc46b..00f86cada30d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
@@ -278,8 +278,6 @@ rtc@68 {
pmic@69 {
compatible = "mps,mp5416";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pmic>;
reg = <0x69>;
regulators {
@@ -444,12 +442,6 @@ MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3
>;
};
- pinctrl_pmic: pmicgrp {
- fsl,pins = <
- MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41
- >;
- };
-
pinctrl_uart2: uart2grp {
fsl,pins = <
MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
--
2.30.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-09-09 12:29 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20210909114635.143983-1-sashal@kernel.org>
2021-09-09 11:43 ` [PATCH AUTOSEL 5.13 007/219] ASoC: atmel: ATMEL drivers don't need HAS_DMA Sasha Levin
2021-09-09 11:43 ` [PATCH AUTOSEL 5.13 014/219] crypto: mxs-dcp - Use sg_mapping_iter to copy data Sasha Levin
2021-09-09 11:43 ` [PATCH AUTOSEL 5.13 046/219] media: platform: stm32: unprepare clocks at handling errors in probe Sasha Levin
2021-09-09 11:43 ` [PATCH AUTOSEL 5.13 050/219] spi: imx: fix ERR009165 Sasha Levin
2021-09-09 11:43 ` [PATCH AUTOSEL 5.13 051/219] spi: imx: remove ERR009165 workaround on i.mx6ul Sasha Levin
2021-09-09 11:43 ` [PATCH AUTOSEL 5.13 058/219] arm64: dts: allwinner: h6: tanix-tx6: Fix regulator node names Sasha Levin
2021-09-09 11:44 ` [PATCH AUTOSEL 5.13 079/219] ARM: dts: stm32: Set {bitclock, frame}-master phandles on DHCOM SoM Sasha Levin
2021-09-09 11:44 ` [PATCH AUTOSEL 5.13 080/219] ARM: dts: stm32: Set {bitclock, frame}-master phandles on ST DKx Sasha Levin
2021-09-09 11:44 ` [PATCH AUTOSEL 5.13 081/219] ARM: dts: stm32: Update AV96 adv7513 node per dtbs_check Sasha Levin
2021-09-09 11:44 ` [PATCH AUTOSEL 5.13 084/219] ARM: dts: at91: use the right property for shutdown controller Sasha Levin
2021-09-09 11:44 ` [PATCH AUTOSEL 5.13 093/219] media: imx: imx7-media-csi: Fix buffer return upon stream start failure Sasha Levin
2021-09-09 11:44 ` [PATCH AUTOSEL 5.13 102/219] ARM: dts: imx53-ppd: Fix ACHC entry Sasha Levin
2021-09-09 11:44 ` [PATCH AUTOSEL 5.13 111/219] net: ethernet: stmmac: Do not use unreachable() in ipq806x_gmac_probe() Sasha Levin
2021-09-09 11:44 ` [PATCH AUTOSEL 5.13 114/219] drm: xlnx: zynqmp_dpsub: Call pm_runtime_get_sync before setting pixel clock Sasha Levin
2021-09-09 11:44 ` [PATCH AUTOSEL 5.13 115/219] drm: xlnx: zynqmp: release reset to DP controller before accessing DP registers Sasha Levin
2021-09-09 11:45 ` [PATCH AUTOSEL 5.13 135/219] arm64: dts: imx8mm-venice-gw700x: fix mp5416 pmic config Sasha Levin
2021-09-09 11:45 ` Sasha Levin [this message]
2021-09-09 11:45 ` [PATCH AUTOSEL 5.13 137/219] arm64: dts: imx8mm-venice-gw71xx: fix USB OTG VBUS Sasha Levin
2021-09-09 11:45 ` [PATCH AUTOSEL 5.13 138/219] arm64: dts: ls1046a: fix eeprom entries Sasha Levin
2021-09-09 11:45 ` [PATCH AUTOSEL 5.13 157/219] kselftest/arm64: mte: Fix misleading output when skipping tests Sasha Levin
2021-09-09 11:45 ` [PATCH AUTOSEL 5.13 158/219] kselftest/arm64: pac: Fix skipping of tests on systems without PAC Sasha Levin
2021-09-09 11:45 ` [PATCH AUTOSEL 5.13 162/219] drm/exynos: Always initialize mapping in exynos_drm_register_dma() Sasha Levin
2021-09-09 11:45 ` [PATCH AUTOSEL 5.13 181/219] mmc: sdhci-of-arasan: Modified SD default speed to 19MHz for ZynqMP Sasha Levin
2021-09-09 11:45 ` [PATCH AUTOSEL 5.13 182/219] mmc: sdhci-of-arasan: Check return value of non-void funtions Sasha Levin
2021-09-09 11:46 ` [PATCH AUTOSEL 5.13 190/219] usb: dwc3: imx8mp: request irq after initializing dwc3 Sasha Levin
2021-09-09 11:46 ` [PATCH AUTOSEL 5.13 194/219] usb: xhci-mtk: fix use-after-free of mtk->hcd Sasha Levin
2021-09-09 11:46 ` [PATCH AUTOSEL 5.13 195/219] ASoC: rockchip: i2s: Fix regmap_ops hang Sasha Levin
2021-09-09 11:46 ` [PATCH AUTOSEL 5.13 196/219] ASoC: rockchip: i2s: Fixup config for DAIFMT_DSP_A/B Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210909114635.143983-136-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=shawnguo@kernel.org \
--cc=stable@vger.kernel.org \
--cc=tharvey@gateworks.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).