[PATCH AUTOSEL 5.4 002/109] ASoC: atmel: ATMEL drivers don't need HAS_DMA

[PATCH AUTOSEL 5.4 002/109] ASoC: atmel: ATMEL drivers don't need HAS_DMA

[Sasha Levin]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 6c5c659dfe3f02e08054a6c20019e3886618b512 ]

On a config (such as arch/sh/) which does not set HAS_DMA when MMU
is not set, several ATMEL ASoC drivers select symbols that cause
kconfig warnings. There is one "depends on HAS_DMA" which is no longer
needed. Dropping it eliminates the kconfig warnings and still builds
with no problems reported.

Fix the following kconfig warnings:

WARNING: unmet direct dependencies detected for SND_ATMEL_SOC_PDC
  Depends on [n]: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m] && HAS_DMA [=n]
  Selected by [m]:
  - SND_ATMEL_SOC_SSC [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m]
  - SND_ATMEL_SOC_SSC_PDC [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m] && ATMEL_SSC [=m]

WARNING: unmet direct dependencies detected for SND_ATMEL_SOC_SSC_PDC
  Depends on [n]: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m] && ATMEL_SSC [=m] && HAS_DMA [=n]
  Selected by [m]:
  - SND_AT91_SOC_SAM9G20_WM8731 [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m] && (ARCH_AT91 || COMPILE_TEST [=y]) && ATMEL_SSC [=m] && SND_SOC_I2C_AND_SPI [=m]

WARNING: unmet direct dependencies detected for SND_ATMEL_SOC_SSC
  Depends on [n]: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m] && HAS_DMA [=n]
  Selected by [m]:
  - SND_ATMEL_SOC_SSC_DMA [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m] && ATMEL_SSC [=m]

WARNING: unmet direct dependencies detected for SND_ATMEL_SOC_SSC_DMA
  Depends on [n]: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m] && ATMEL_SSC [=m] && HAS_DMA [=n]
  Selected by [m]:
  - SND_ATMEL_SOC_WM8904 [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m] && (ARCH_AT91 || COMPILE_TEST [=y]) && ATMEL_SSC [=m] && I2C [=m]
  - SND_AT91_SOC_SAM9X5_WM8731 [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m] && (ARCH_AT91 || COMPILE_TEST [=y]) && ATMEL_SSC [=m] && SND_SOC_I2C_AND_SPI [=m]

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210707214752.3831-1-rdunlap@infradead.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/atmel/Kconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/sound/soc/atmel/Kconfig b/sound/soc/atmel/Kconfig
index 71f2d42188c4..51e75b781968 100644
--- a/sound/soc/atmel/Kconfig
+++ b/sound/soc/atmel/Kconfig
@@ -11,7 +11,6 @@ if SND_ATMEL_SOC
 
 config SND_ATMEL_SOC_PDC
 	bool
-	depends on HAS_DMA
 
 config SND_ATMEL_SOC_DMA
 	bool
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 004/109] crypto: mxs-dcp - Use sg_mapping_iter to copy data

[Sasha Levin]

From: Sean Anderson <sean.anderson@seco.com>

[ Upstream commit 2e6d793e1bf07fe5e20cfbbdcec9e1af7e5097eb ]

This uses the sg_pcopy_from_buffer to copy data, instead of doing it
ourselves.

In addition to reducing code size, this fixes the following oops
resulting from failing to kmap the page:

[   68.896381] Unable to handle kernel NULL pointer dereference at virtual address 00000ab8
[   68.904539] pgd = 3561adb3
[   68.907475] [00000ab8] *pgd=00000000
[   68.911153] Internal error: Oops: 805 [#1] ARM
[   68.915618] Modules linked in: cfg80211 rfkill des_generic libdes arc4 libarc4 cbc ecb algif_skcipher sha256_generic libsha256 sha1_generic hmac aes_generic libaes cmac sha512_generic md5 md4 algif_hash af_alg i2c_imx i2c_core ci_hdrc_imx ci_hdrc mxs_dcp ulpi roles udc_core imx_sdma usbmisc_imx usb_common firmware_class virt_dma phy_mxs_usb nf_tables nfnetlink ip_tables x_tables ipv6 autofs4
[   68.950741] CPU: 0 PID: 139 Comm: mxs_dcp_chan/ae Not tainted 5.10.34 #296
[   68.958501] Hardware name: Freescale i.MX6 Ultralite (Device Tree)
[   68.964710] PC is at memcpy+0xa8/0x330
[   68.968479] LR is at 0xd7b2bc9d
[   68.971638] pc : [<c053e7c8>]    lr : [<d7b2bc9d>]    psr: 000f0013
[   68.977920] sp : c2cbbee4  ip : 00000010  fp : 00000010
[   68.983159] r10: 00000000  r9 : c3283a40  r8 : 1a5a6f08
[   68.988402] r7 : 4bfe0ecc  r6 : 76d8a220  r5 : c32f9050  r4 : 00000001
[   68.994945] r3 : 00000ab8  r2 : fffffff0  r1 : c32f9050  r0 : 00000ab8
[   69.001492] Flags: nzcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[   69.008646] Control: 10c53c7d  Table: 83664059  DAC: 00000051
[   69.014414] Process mxs_dcp_chan/ae (pid: 139, stack limit = 0x667b57ab)
[   69.021133] Stack: (0xc2cbbee4 to 0xc2cbc000)
[   69.025519] bee0:          c32f9050 c3235408 00000010 00000010 00000ab8 00000001 bf10406c
[   69.033720] bf00: 00000000 00000000 00000010 00000000 c32355d0 832fb080 00000000 c13de2fc
[   69.041921] bf20: c3628010 00000010 c33d5780 00000ab8 bf1067e8 00000002 c21e5010 c2cba000
[   69.050125] bf40: c32f8040 00000000 bf106a40 c32f9040 c3283a80 00000001 bf105240 c3234040
[   69.058327] bf60: ffffe000 c3204100 c2c69800 c2cba000 00000000 bf103b84 00000000 c2eddc54
[   69.066530] bf80: c3204144 c0140d1c c2cba000 c2c69800 c0140be8 00000000 00000000 00000000
[   69.074730] bfa0: 00000000 00000000 00000000 c0100114 00000000 00000000 00000000 00000000
[   69.082932] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   69.091131] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[   69.099364] [<c053e7c8>] (memcpy) from [<bf10406c>] (dcp_chan_thread_aes+0x4e8/0x840 [mxs_dcp])
[   69.108117] [<bf10406c>] (dcp_chan_thread_aes [mxs_dcp]) from [<c0140d1c>] (kthread+0x134/0x160)
[   69.116941] [<c0140d1c>] (kthread) from [<c0100114>] (ret_from_fork+0x14/0x20)
[   69.124178] Exception stack(0xc2cbbfb0 to 0xc2cbbff8)
[   69.129250] bfa0:                                     00000000 00000000 00000000 00000000
[   69.137450] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   69.145648] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000
[   69.152289] Code: e320f000 e4803004 e4804004 e4805004 (e4806004)

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/mxs-dcp.c | 36 +++++++++---------------------------
 1 file changed, 9 insertions(+), 27 deletions(-)

diff --git a/drivers/crypto/mxs-dcp.c b/drivers/crypto/mxs-dcp.c
index f8a48a84df2a..658a78974a22 100644
--- a/drivers/crypto/mxs-dcp.c
+++ b/drivers/crypto/mxs-dcp.c
@@ -281,21 +281,20 @@ static int mxs_dcp_aes_block_crypt(struct crypto_async_request *arq)
 
 	struct scatterlist *dst = req->dst;
 	struct scatterlist *src = req->src;
-	const int nents = sg_nents(req->src);
+	int dst_nents = sg_nents(dst);
 
 	const int out_off = DCP_BUF_SZ;
 	uint8_t *in_buf = sdcp->coh->aes_in_buf;
 	uint8_t *out_buf = sdcp->coh->aes_out_buf;
 
-	uint8_t *out_tmp, *src_buf, *dst_buf = NULL;
 	uint32_t dst_off = 0;
+	uint8_t *src_buf = NULL;
 	uint32_t last_out_len = 0;
 
 	uint8_t *key = sdcp->coh->aes_key;
 
 	int ret = 0;
-	int split = 0;
-	unsigned int i, len, clen, rem = 0, tlen = 0;
+	unsigned int i, len, clen, tlen = 0;
 	int init = 0;
 	bool limit_hit = false;
 
@@ -313,7 +312,7 @@ static int mxs_dcp_aes_block_crypt(struct crypto_async_request *arq)
 		memset(key + AES_KEYSIZE_128, 0, AES_KEYSIZE_128);
 	}
 
-	for_each_sg(req->src, src, nents, i) {
+	for_each_sg(req->src, src, sg_nents(src), i) {
 		src_buf = sg_virt(src);
 		len = sg_dma_len(src);
 		tlen += len;
@@ -338,34 +337,17 @@ static int mxs_dcp_aes_block_crypt(struct crypto_async_request *arq)
 			 * submit the buffer.
 			 */
 			if (actx->fill == out_off || sg_is_last(src) ||
-				limit_hit) {
+			    limit_hit) {
 				ret = mxs_dcp_run_aes(actx, req, init);
 				if (ret)
 					return ret;
 				init = 0;
 
-				out_tmp = out_buf;
+				sg_pcopy_from_buffer(dst, dst_nents, out_buf,
+						     actx->fill, dst_off);
+				dst_off += actx->fill;
 				last_out_len = actx->fill;
-				while (dst && actx->fill) {
-					if (!split) {
-						dst_buf = sg_virt(dst);
-						dst_off = 0;
-					}
-					rem = min(sg_dma_len(dst) - dst_off,
-						  actx->fill);
-
-					memcpy(dst_buf + dst_off, out_tmp, rem);
-					out_tmp += rem;
-					dst_off += rem;
-					actx->fill -= rem;
-
-					if (dst_off == sg_dma_len(dst)) {
-						dst = sg_next(dst);
-						split = 0;
-					} else {
-						split = 1;
-					}
-				}
+				actx->fill = 0;
 			}
 		} while (len);
 
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 024/109] spi: imx: fix ERR009165

[Sasha Levin]

From: Robin Gong <yibin.gong@nxp.com>

[ Upstream commit 980f884866eed4dda2a18de888c5a67dde67d640 ]

Change to XCH  mode even in dma mode, please refer to the below
errata:
https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-imx.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 474d5a7fa95e..c47e1d428ef4 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -614,8 +614,8 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,
 	ctrl |= mx51_ecspi_clkdiv(spi_imx, spi_imx->spi_bus_clk, &clk);
 	spi_imx->spi_bus_clk = clk;
 
-	if (spi_imx->usedma)
-		ctrl |= MX51_ECSPI_CTRL_SMC;
+	/* ERR009165: work in XHC mode as PIO */
+	ctrl &= ~MX51_ECSPI_CTRL_SMC;
 
 	writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
 
@@ -629,7 +629,7 @@ static void mx51_setup_wml(struct spi_imx_data *spi_imx)
 	 * and enable DMA request.
 	 */
 	writel(MX51_ECSPI_DMA_RX_WML(spi_imx->wml - 1) |
-		MX51_ECSPI_DMA_TX_WML(spi_imx->wml) |
+		MX51_ECSPI_DMA_TX_WML(0) |
 		MX51_ECSPI_DMA_RXT_WML(spi_imx->wml) |
 		MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN |
 		MX51_ECSPI_DMA_RXTDEN, spi_imx->base + MX51_ECSPI_DMA);
@@ -1284,10 +1284,6 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
 {
 	int ret;
 
-	/* use pio mode for i.mx6dl chip TKT238285 */
-	if (of_machine_is_compatible("fsl,imx6dl"))
-		return 0;
-
 	spi_imx->wml = spi_imx->devtype_data->fifo_size / 2;
 
 	/* Prepare for TX DMA: */
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 054/109] ARM: dts: imx53-ppd: Fix ACHC entry

[Sasha Levin]

From: Sebastian Reichel <sebastian.reichel@collabora.com>

[ Upstream commit cd7cd5b716d594e27a933c12f026d4f2426d7bf4 ]

PPD has only one ACHC device, which effectively is a Kinetis
microcontroller. It has one SPI interface used for normal
communication. Additionally it's possible to flash the device
firmware using NXP's EzPort protocol by correctly driving a
second chip select pin and the device reset pin.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20210802172309.164365-3-sebastian.reichel@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx53-ppd.dts | 23 +++++++++++++----------
 1 file changed, 13 insertions(+), 10 deletions(-)

diff --git a/arch/arm/boot/dts/imx53-ppd.dts b/arch/arm/boot/dts/imx53-ppd.dts
index 5ff9a179c83c..c80d1700e094 100644
--- a/arch/arm/boot/dts/imx53-ppd.dts
+++ b/arch/arm/boot/dts/imx53-ppd.dts
@@ -70,6 +70,12 @@ cko2_11M: sgtl-clock-cko2 {
 		clock-frequency = <11289600>;
 	};
 
+	achc_24M: achc-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
 	sgtlsound: sound {
 		compatible = "fsl,imx53-cpuvo-sgtl5000",
 			     "fsl,imx-audio-sgtl5000";
@@ -287,16 +293,13 @@ &gpio4 11 GPIO_ACTIVE_LOW
 		    &gpio4 12 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
-	spidev0: spi@0 {
-		compatible = "ge,achc";
-		reg = <0>;
-		spi-max-frequency = <1000000>;
-	};
-
-	spidev1: spi@1 {
-		compatible = "ge,achc";
-		reg = <1>;
-		spi-max-frequency = <1000000>;
+	spidev0: spi@1 {
+		compatible = "ge,achc", "nxp,kinetis-k20";
+		reg = <1>, <0>;
+		vdd-supply = <&reg_3v3>;
+		vdda-supply = <&reg_3v3>;
+		clocks = <&achc_24M>;
+		reset-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
 	};
 
 	gpioxra0: gpio@2 {
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 056/109] net: ethernet: stmmac: Do not use unreachable() in ipq806x_gmac_probe()

[Sasha Levin]

From: Nathan Chancellor <nathan@kernel.org>

[ Upstream commit 4367355dd90942a71641c98c40c74589c9bddf90 ]

When compiling with clang in certain configurations, an objtool warning
appears:

drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.o: warning: objtool:
ipq806x_gmac_probe() falls through to next function phy_modes()

This happens because the unreachable annotation in the third switch
statement is not eliminated. The compiler should know that the first
default case would prevent the second and third from being reached as
the comment notes but sanitizer options can make it harder for the
compiler to reason this out.

Help the compiler out by eliminating the unreachable() annotation and
unifying the default case error handling so that there is no objtool
warning, the meaning of the code stays the same, and there is less
duplication.

Reported-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../ethernet/stmicro/stmmac/dwmac-ipq806x.c    | 18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
index 0f56f8e33691..03b11f191c26 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
@@ -288,10 +288,7 @@ static int ipq806x_gmac_probe(struct platform_device *pdev)
 		val &= ~NSS_COMMON_GMAC_CTL_PHY_IFACE_SEL;
 		break;
 	default:
-		dev_err(&pdev->dev, "Unsupported PHY mode: \"%s\"\n",
-			phy_modes(gmac->phy_mode));
-		err = -EINVAL;
-		goto err_remove_config_dt;
+		goto err_unsupported_phy;
 	}
 	regmap_write(gmac->nss_common, NSS_COMMON_GMAC_CTL(gmac->id), val);
 
@@ -308,10 +305,7 @@ static int ipq806x_gmac_probe(struct platform_device *pdev)
 			NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id);
 		break;
 	default:
-		dev_err(&pdev->dev, "Unsupported PHY mode: \"%s\"\n",
-			phy_modes(gmac->phy_mode));
-		err = -EINVAL;
-		goto err_remove_config_dt;
+		goto err_unsupported_phy;
 	}
 	regmap_write(gmac->nss_common, NSS_COMMON_CLK_SRC_CTRL, val);
 
@@ -328,8 +322,7 @@ static int ipq806x_gmac_probe(struct platform_device *pdev)
 				NSS_COMMON_CLK_GATE_GMII_TX_EN(gmac->id);
 		break;
 	default:
-		/* We don't get here; the switch above will have errored out */
-		unreachable();
+		goto err_unsupported_phy;
 	}
 	regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val);
 
@@ -360,6 +353,11 @@ static int ipq806x_gmac_probe(struct platform_device *pdev)
 
 	return 0;
 
+err_unsupported_phy:
+	dev_err(&pdev->dev, "Unsupported PHY mode: \"%s\"\n",
+		phy_modes(gmac->phy_mode));
+	err = -EINVAL;
+
 err_remove_config_dt:
 	stmmac_remove_config_dt(pdev, plat_dat);
 
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 067/109] arm64: dts: ls1046a: fix eeprom entries

[Sasha Levin]

From: Raag Jadav <raagjadav@gmail.com>

[ Upstream commit c1a6018d1839c9cb8f807dc863a50102a1a5c412 ]

ls1046afrwy and ls1046ardb boards have CAT24C04[1] and CAT24C05[2]
eeproms respectively. Both are 4Kb (512 bytes) in size,
and compatible with AT24C04[3].
Remove multi-address entries, as both the boards have a single chip each.

[1] https://www.onsemi.com/pdf/datasheet/cat24c01-d.pdf
[2] https://www.onsemi.com/pdf/datasheet/cat24c03-d.pdf
[3] https://ww1.microchip.com/downloads/en/DeviceDoc/doc0180.pdf

Signed-off-by: Raag Jadav <raagjadav@gmail.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts | 8 +-------
 arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts  | 7 +------
 2 files changed, 2 insertions(+), 13 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
index 3595be0f2527..2d6c73d7d397 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
@@ -83,15 +83,9 @@ rtc@51 {
 			};
 
 			eeprom@52 {
-				compatible = "atmel,24c512";
+				compatible = "onnn,cat24c04", "atmel,24c04";
 				reg = <0x52>;
 			};
-
-			eeprom@53 {
-				compatible = "atmel,24c512";
-				reg = <0x53>;
-			};
-
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
index 274339759114..8858c1e92f23 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
@@ -58,14 +58,9 @@ temp-sensor@4c {
 	};
 
 	eeprom@52 {
-		compatible = "atmel,24c512";
+		compatible = "onnn,cat24c05", "atmel,24c04";
 		reg = <0x52>;
 	};
-
-	eeprom@53 {
-		compatible = "atmel,24c512";
-		reg = <0x53>;
-	};
 };
 
 &i2c3 {
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 079/109] drm/exynos: Always initialize mapping in exynos_drm_register_dma()

[Sasha Levin]

From: Nathan Chancellor <nathan@kernel.org>

[ Upstream commit c626f3864bbbb28bbe06476b0b497c1330aa4463 ]

In certain randconfigs, clang warns:

drivers/gpu/drm/exynos/exynos_drm_dma.c:121:19: warning: variable
'mapping' is uninitialized when used here [-Wuninitialized]
                priv->mapping = mapping;
                                ^~~~~~~
drivers/gpu/drm/exynos/exynos_drm_dma.c:111:16: note: initialize the
variable 'mapping' to silence this warning
                void *mapping;
                             ^
                              = NULL
1 warning generated.

This occurs when CONFIG_EXYNOS_IOMMU is enabled and both
CONFIG_ARM_DMA_USE_IOMMU and CONFIG_IOMMU_DMA are disabled, which makes
the code look like

  void *mapping;

  if (0)
    mapping = arm_iommu_create_mapping()
  else if (0)
    mapping = iommu_get_domain_for_dev()

  ...
  priv->mapping = mapping;

Add an else branch that initializes mapping to the -ENODEV error pointer
so that there is no more warning and the driver does not change during
runtime.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/exynos/exynos_drm_dma.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_dma.c b/drivers/gpu/drm/exynos/exynos_drm_dma.c
index 58b89ec11b0e..a3c9d8b9e1a1 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dma.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dma.c
@@ -140,6 +140,8 @@ int exynos_drm_register_dma(struct drm_device *drm, struct device *dev,
 				EXYNOS_DEV_ADDR_START, EXYNOS_DEV_ADDR_SIZE);
 		else if (IS_ENABLED(CONFIG_IOMMU_DMA))
 			mapping = iommu_get_domain_for_dev(priv->dma_dev);
+		else
+			mapping = ERR_PTR(-ENODEV);
 
 		if (IS_ERR(mapping))
 			return PTR_ERR(mapping);
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 088/109] mmc: sdhci-of-arasan: Check return value of non-void funtions

[Sasha Levin]

From: Manish Narani <manish.narani@xilinx.com>

[ Upstream commit 66bad6ed2204fdb78a0a8fb89d824397106a5471 ]

At a couple of places, the return values of the non-void functions were
not getting checked. This was reported by the coverity tool. Modify the
code to check the return values of the same.

Addresses-Coverity: ("check_return")
Signed-off-by: Manish Narani <manish.narani@xilinx.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/1623753837-21035-5-git-send-email-manish.narani@xilinx.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/sdhci-of-arasan.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index 7023cbec4017..dd10f7abf5a7 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -192,7 +192,12 @@ static void sdhci_arasan_set_clock(struct sdhci_host *host, unsigned int clock)
 			 * through low speeds without power cycling.
 			 */
 			sdhci_set_clock(host, host->max_clk);
-			phy_power_on(sdhci_arasan->phy);
+			if (phy_power_on(sdhci_arasan->phy)) {
+				pr_err("%s: Cannot power on phy.\n",
+				       mmc_hostname(host->mmc));
+				return;
+			}
+
 			sdhci_arasan->is_phy_on = true;
 
 			/*
@@ -228,7 +233,12 @@ static void sdhci_arasan_set_clock(struct sdhci_host *host, unsigned int clock)
 		msleep(20);
 
 	if (ctrl_phy) {
-		phy_power_on(sdhci_arasan->phy);
+		if (phy_power_on(sdhci_arasan->phy)) {
+			pr_err("%s: Cannot power on phy.\n",
+			       mmc_hostname(host->mmc));
+			return;
+		}
+
 		sdhci_arasan->is_phy_on = true;
 	}
 }
@@ -416,7 +426,9 @@ static int sdhci_arasan_suspend(struct device *dev)
 		ret = phy_power_off(sdhci_arasan->phy);
 		if (ret) {
 			dev_err(dev, "Cannot power off phy.\n");
-			sdhci_resume_host(host);
+			if (sdhci_resume_host(host))
+				dev_err(dev, "Cannot resume host.\n");
+
 			return ret;
 		}
 		sdhci_arasan->is_phy_on = false;
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 097/109] ASoC: rockchip: i2s: Fix regmap_ops hang

[Sasha Levin]

From: Sugar Zhang <sugar.zhang@rock-chips.com>

[ Upstream commit 53ca9b9777b95cdd689181d7c547e38dc79adad0 ]

API 'set_fmt' maybe called when PD is off, in the situation,
any register access will hang the system. so, enable PD
before r/w register.

Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Link: https://lore.kernel.org/r/1629950520-14190-4-git-send-email-sugar.zhang@rock-chips.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/rockchip/rockchip_i2s.c | 19 ++++++++++++++-----
 1 file changed, 14 insertions(+), 5 deletions(-)

diff --git a/sound/soc/rockchip/rockchip_i2s.c b/sound/soc/rockchip/rockchip_i2s.c
index 61c984f10d8e..f48b146cd96a 100644
--- a/sound/soc/rockchip/rockchip_i2s.c
+++ b/sound/soc/rockchip/rockchip_i2s.c
@@ -186,7 +186,9 @@ static int rockchip_i2s_set_fmt(struct snd_soc_dai *cpu_dai,
 {
 	struct rk_i2s_dev *i2s = to_info(cpu_dai);
 	unsigned int mask = 0, val = 0;
+	int ret = 0;
 
+	pm_runtime_get_sync(cpu_dai->dev);
 	mask = I2S_CKR_MSS_MASK;
 	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
 	case SND_SOC_DAIFMT_CBS_CFS:
@@ -199,7 +201,8 @@ static int rockchip_i2s_set_fmt(struct snd_soc_dai *cpu_dai,
 		i2s->is_master_mode = false;
 		break;
 	default:
-		return -EINVAL;
+		ret = -EINVAL;
+		goto err_pm_put;
 	}
 
 	regmap_update_bits(i2s->regmap, I2S_CKR, mask, val);
@@ -213,7 +216,8 @@ static int rockchip_i2s_set_fmt(struct snd_soc_dai *cpu_dai,
 		val = I2S_CKR_CKP_POS;
 		break;
 	default:
-		return -EINVAL;
+		ret = -EINVAL;
+		goto err_pm_put;
 	}
 
 	regmap_update_bits(i2s->regmap, I2S_CKR, mask, val);
@@ -236,7 +240,8 @@ static int rockchip_i2s_set_fmt(struct snd_soc_dai *cpu_dai,
 		val = I2S_TXCR_TFS_PCM | I2S_TXCR_PBM_MODE(1);
 		break;
 	default:
-		return -EINVAL;
+		ret = -EINVAL;
+		goto err_pm_put;
 	}
 
 	regmap_update_bits(i2s->regmap, I2S_TXCR, mask, val);
@@ -259,12 +264,16 @@ static int rockchip_i2s_set_fmt(struct snd_soc_dai *cpu_dai,
 		val = I2S_RXCR_TFS_PCM | I2S_RXCR_PBM_MODE(1);
 		break;
 	default:
-		return -EINVAL;
+		ret = -EINVAL;
+		goto err_pm_put;
 	}
 
 	regmap_update_bits(i2s->regmap, I2S_RXCR, mask, val);
 
-	return 0;
+err_pm_put:
+	pm_runtime_put(cpu_dai->dev);
+
+	return ret;
 }
 
 static int rockchip_i2s_hw_params(struct snd_pcm_substream *substream,
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 098/109] ASoC: rockchip: i2s: Fixup config for DAIFMT_DSP_A/B

[Sasha Levin]

From: Xiaotan Luo <lxt@rock-chips.com>

[ Upstream commit 1bf56843e664eef2525bdbfae6a561e98910f676 ]

- DSP_A: PCM delay 1 bit mode, L data MSB after FRM LRC
- DSP_B: PCM no delay mode, L data MSB during FRM LRC

Signed-off-by: Xiaotan Luo <lxt@rock-chips.com>
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Link: https://lore.kernel.org/r/1629950562-14281-3-git-send-email-sugar.zhang@rock-chips.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/rockchip/rockchip_i2s.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/sound/soc/rockchip/rockchip_i2s.c b/sound/soc/rockchip/rockchip_i2s.c
index f48b146cd96a..086c90e09577 100644
--- a/sound/soc/rockchip/rockchip_i2s.c
+++ b/sound/soc/rockchip/rockchip_i2s.c
@@ -233,12 +233,12 @@ static int rockchip_i2s_set_fmt(struct snd_soc_dai *cpu_dai,
 	case SND_SOC_DAIFMT_I2S:
 		val = I2S_TXCR_IBM_NORMAL;
 		break;
-	case SND_SOC_DAIFMT_DSP_A: /* PCM no delay mode */
-		val = I2S_TXCR_TFS_PCM;
-		break;
-	case SND_SOC_DAIFMT_DSP_B: /* PCM delay 1 mode */
+	case SND_SOC_DAIFMT_DSP_A: /* PCM delay 1 bit mode */
 		val = I2S_TXCR_TFS_PCM | I2S_TXCR_PBM_MODE(1);
 		break;
+	case SND_SOC_DAIFMT_DSP_B: /* PCM no delay mode */
+		val = I2S_TXCR_TFS_PCM;
+		break;
 	default:
 		ret = -EINVAL;
 		goto err_pm_put;
@@ -257,12 +257,12 @@ static int rockchip_i2s_set_fmt(struct snd_soc_dai *cpu_dai,
 	case SND_SOC_DAIFMT_I2S:
 		val = I2S_RXCR_IBM_NORMAL;
 		break;
-	case SND_SOC_DAIFMT_DSP_A: /* PCM no delay mode */
-		val = I2S_RXCR_TFS_PCM;
-		break;
-	case SND_SOC_DAIFMT_DSP_B: /* PCM delay 1 mode */
+	case SND_SOC_DAIFMT_DSP_A: /* PCM delay 1 bit mode */
 		val = I2S_RXCR_TFS_PCM | I2S_RXCR_PBM_MODE(1);
 		break;
+	case SND_SOC_DAIFMT_DSP_B: /* PCM no delay mode */
+		val = I2S_RXCR_TFS_PCM;
+		break;
 	default:
 		ret = -EINVAL;
 		goto err_pm_put;
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel