[PATCH AUTOSEL 5.14 03/32] mfd: db8500-prcmu: Adjust map to reality

[PATCH AUTOSEL 5.14 03/32] mfd: db8500-prcmu: Adjust map to reality

[Sasha Levin]

From: Linus Walleij <linus.walleij@linaro.org>

[ Upstream commit ec343111c056ec3847800302f6dbc57281f833fa ]

These are the actual frequencies reported by the PLL, so let's
report these. The roundoffs are inappropriate, we should round
to the frequency that the clock will later report.

Drop some whitespace at the same time.

Cc: phone-devel@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/db8500-prcmu.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index 3bde7fda755f..dea4e4e8bed5 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -1622,22 +1622,20 @@ static long round_clock_rate(u8 clock, unsigned long rate)
 }
 
 static const unsigned long db8500_armss_freqs[] = {
-	200000000,
-	400000000,
-	800000000,
+	199680000,
+	399360000,
+	798720000,
 	998400000
 };
 
 /* The DB8520 has slightly higher ARMSS max frequency */
 static const unsigned long db8520_armss_freqs[] = {
-	200000000,
-	400000000,
-	800000000,
+	199680000,
+	399360000,
+	798720000,
 	1152000000
 };
 
-
-
 static long round_armss_rate(unsigned long rate)
 {
 	unsigned long freq = 0;
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.14 09/32] mfd: Don't use irq_create_mapping() to resolve a mapping

[Sasha Levin]

From: Marc Zyngier <maz@kernel.org>

[ Upstream commit 9ff80e2de36d0554e3a6da18a171719fe8663c17 ]

Although irq_create_mapping() is able to deal with duplicate
mappings, it really isn't supposed to be a substitute for
irq_find_mapping(), and can result in allocations that take place
in atomic context if the mapping didn't exist.

Fix the handful of MFD drivers that use irq_create_mapping() in
interrupt context by using irq_find_mapping() instead.

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/ab8500-core.c | 2 +-
 drivers/mfd/stmpe.c       | 4 ++--
 drivers/mfd/tc3589x.c     | 2 +-
 drivers/mfd/wm8994-irq.c  | 2 +-
 4 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index 30489670ea52..cca0aac26148 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -485,7 +485,7 @@ static int ab8500_handle_hierarchical_line(struct ab8500 *ab8500,
 		if (line == AB8540_INT_GPIO43F || line == AB8540_INT_GPIO44F)
 			line += 1;
 
-		handle_nested_irq(irq_create_mapping(ab8500->domain, line));
+		handle_nested_irq(irq_find_mapping(ab8500->domain, line));
 	}
 
 	return 0;
diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
index 1dd39483e7c1..58d09c615e67 100644
--- a/drivers/mfd/stmpe.c
+++ b/drivers/mfd/stmpe.c
@@ -1095,7 +1095,7 @@ static irqreturn_t stmpe_irq(int irq, void *data)
 
 	if (variant->id_val == STMPE801_ID ||
 	    variant->id_val == STMPE1600_ID) {
-		int base = irq_create_mapping(stmpe->domain, 0);
+		int base = irq_find_mapping(stmpe->domain, 0);
 
 		handle_nested_irq(base);
 		return IRQ_HANDLED;
@@ -1123,7 +1123,7 @@ static irqreturn_t stmpe_irq(int irq, void *data)
 		while (status) {
 			int bit = __ffs(status);
 			int line = bank * 8 + bit;
-			int nestedirq = irq_create_mapping(stmpe->domain, line);
+			int nestedirq = irq_find_mapping(stmpe->domain, line);
 
 			handle_nested_irq(nestedirq);
 			status &= ~(1 << bit);
diff --git a/drivers/mfd/tc3589x.c b/drivers/mfd/tc3589x.c
index 7614f8fe0e91..13583cdb93b6 100644
--- a/drivers/mfd/tc3589x.c
+++ b/drivers/mfd/tc3589x.c
@@ -187,7 +187,7 @@ static irqreturn_t tc3589x_irq(int irq, void *data)
 
 	while (status) {
 		int bit = __ffs(status);
-		int virq = irq_create_mapping(tc3589x->domain, bit);
+		int virq = irq_find_mapping(tc3589x->domain, bit);
 
 		handle_nested_irq(virq);
 		status &= ~(1 << bit);
diff --git a/drivers/mfd/wm8994-irq.c b/drivers/mfd/wm8994-irq.c
index 6c3a619e2628..651a028bc519 100644
--- a/drivers/mfd/wm8994-irq.c
+++ b/drivers/mfd/wm8994-irq.c
@@ -154,7 +154,7 @@ static irqreturn_t wm8994_edge_irq(int irq, void *data)
 	struct wm8994 *wm8994 = data;
 
 	while (gpio_get_value_cansleep(wm8994->pdata.irq_gpio))
-		handle_nested_irq(irq_create_mapping(wm8994->edge_irq, 0));
+		handle_nested_irq(irq_find_mapping(wm8994->edge_irq, 0));
 
 	return IRQ_HANDLED;
 }
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.14 13/32] KVM: arm64: Make hyp_panic() more robust when protected mode is enabled

[Sasha Levin]

From: Will Deacon <will@kernel.org>

[ Upstream commit ccac96977243d7916053550f62e6489760ad0adc ]

When protected mode is enabled, the host is unable to access most parts
of the EL2 hypervisor image, including 'hyp_physvirt_offset' and the
contents of the hypervisor's '.rodata.str' section. Unfortunately,
nvhe_hyp_panic_handler() tries to read from both of these locations when
handling a BUG() triggered at EL2; the former for converting the ELR to
a physical address and the latter for displaying the name of the source
file where the BUG() occurred.

Hack the EL2 panic asm to pass both physical and virtual ELR values to
the host and utilise the newly introduced CONFIG_NVHE_EL2_DEBUG so that
we disable stage-2 protection for the host before returning to the EL1
panic handler. If the debug option is not enabled, display the address
instead of the source file:line information.

Cc: Andrew Scull <ascull@google.com>
Cc: Quentin Perret <qperret@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210813130336.8139-1-will@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kvm/handle_exit.c   | 23 ++++++++++++++---------
 arch/arm64/kvm/hyp/nvhe/host.S | 21 +++++++++++++++++----
 2 files changed, 31 insertions(+), 13 deletions(-)

diff --git a/arch/arm64/kvm/handle_exit.c b/arch/arm64/kvm/handle_exit.c
index 6f48336b1d86..04ebab299aa4 100644
--- a/arch/arm64/kvm/handle_exit.c
+++ b/arch/arm64/kvm/handle_exit.c
@@ -292,11 +292,12 @@ void handle_exit_early(struct kvm_vcpu *vcpu, int exception_index)
 		kvm_handle_guest_serror(vcpu, kvm_vcpu_get_esr(vcpu));
 }
 
-void __noreturn __cold nvhe_hyp_panic_handler(u64 esr, u64 spsr, u64 elr,
+void __noreturn __cold nvhe_hyp_panic_handler(u64 esr, u64 spsr,
+					      u64 elr_virt, u64 elr_phys,
 					      u64 par, uintptr_t vcpu,
 					      u64 far, u64 hpfar) {
-	u64 elr_in_kimg = __phys_to_kimg(__hyp_pa(elr));
-	u64 hyp_offset = elr_in_kimg - kaslr_offset() - elr;
+	u64 elr_in_kimg = __phys_to_kimg(elr_phys);
+	u64 hyp_offset = elr_in_kimg - kaslr_offset() - elr_virt;
 	u64 mode = spsr & PSR_MODE_MASK;
 
 	/*
@@ -309,20 +310,24 @@ void __noreturn __cold nvhe_hyp_panic_handler(u64 esr, u64 spsr, u64 elr,
 		kvm_err("Invalid host exception to nVHE hyp!\n");
 	} else if (ESR_ELx_EC(esr) == ESR_ELx_EC_BRK64 &&
 		   (esr & ESR_ELx_BRK64_ISS_COMMENT_MASK) == BUG_BRK_IMM) {
-		struct bug_entry *bug = find_bug(elr_in_kimg);
 		const char *file = NULL;
 		unsigned int line = 0;
 
 		/* All hyp bugs, including warnings, are treated as fatal. */
-		if (bug)
-			bug_get_file_line(bug, &file, &line);
+		if (!is_protected_kvm_enabled() ||
+		    IS_ENABLED(CONFIG_NVHE_EL2_DEBUG)) {
+			struct bug_entry *bug = find_bug(elr_in_kimg);
+
+			if (bug)
+				bug_get_file_line(bug, &file, &line);
+		}
 
 		if (file)
 			kvm_err("nVHE hyp BUG at: %s:%u!\n", file, line);
 		else
-			kvm_err("nVHE hyp BUG at: %016llx!\n", elr + hyp_offset);
+			kvm_err("nVHE hyp BUG at: %016llx!\n", elr_virt + hyp_offset);
 	} else {
-		kvm_err("nVHE hyp panic at: %016llx!\n", elr + hyp_offset);
+		kvm_err("nVHE hyp panic at: %016llx!\n", elr_virt + hyp_offset);
 	}
 
 	/*
@@ -334,5 +339,5 @@ void __noreturn __cold nvhe_hyp_panic_handler(u64 esr, u64 spsr, u64 elr,
 	kvm_err("Hyp Offset: 0x%llx\n", hyp_offset);
 
 	panic("HYP panic:\nPS:%08llx PC:%016llx ESR:%08llx\nFAR:%016llx HPFAR:%016llx PAR:%016llx\nVCPU:%016lx\n",
-	      spsr, elr, esr, far, hpfar, par, vcpu);
+	      spsr, elr_virt, esr, far, hpfar, par, vcpu);
 }
diff --git a/arch/arm64/kvm/hyp/nvhe/host.S b/arch/arm64/kvm/hyp/nvhe/host.S
index 2b23400e0fb3..4b652ffb591d 100644
--- a/arch/arm64/kvm/hyp/nvhe/host.S
+++ b/arch/arm64/kvm/hyp/nvhe/host.S
@@ -7,6 +7,7 @@
 #include <linux/linkage.h>
 
 #include <asm/assembler.h>
+#include <asm/kvm_arm.h>
 #include <asm/kvm_asm.h>
 #include <asm/kvm_mmu.h>
 
@@ -85,12 +86,24 @@ SYM_FUNC_START(__hyp_do_panic)
 
 	mov	x29, x0
 
+#ifdef CONFIG_NVHE_EL2_DEBUG
+	/* Ensure host stage-2 is disabled */
+	mrs	x0, hcr_el2
+	bic	x0, x0, #HCR_VM
+	msr	hcr_el2, x0
+	isb
+	tlbi	vmalls12e1
+	dsb	nsh
+#endif
+
 	/* Load the panic arguments into x0-7 */
 	mrs	x0, esr_el2
-	get_vcpu_ptr x4, x5
-	mrs	x5, far_el2
-	mrs	x6, hpfar_el2
-	mov	x7, xzr			// Unused argument
+	mov	x4, x3
+	mov	x3, x2
+	hyp_pa	x3, x6
+	get_vcpu_ptr x5, x6
+	mrs	x6, far_el2
+	mrs	x7, hpfar_el2
 
 	/* Enter the host, conditionally restoring the host context. */
 	cbz	x29, __host_enter_without_restoring
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.14 15/32] PCI: cadence: Use bitfield for *quirk_retrain_flag* instead of bool

[Sasha Levin]

From: Kishon Vijay Abraham I <kishon@ti.com>

[ Upstream commit f4455748b2126a9ba2bcc9cfb2fbcaa08de29bb2 ]

No functional change. As we are intending to add additional 1-bit
members in struct j721e_pcie_data/struct cdns_pcie_rc, use bitfields
instead of bool since it takes less space. As discussed in [1],
the preference is to use bitfileds instead of bool inside structures.

[1] -> https://lore.kernel.org/linux-fsdevel/CA+55aFzKQ6Pj18TB8p4Yr0M4t+S+BsiHH=BJNmn=76-NcjTj-g@mail.gmail.com/

Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20210811123336.31357-2-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/cadence/pci-j721e.c    | 2 +-
 drivers/pci/controller/cadence/pcie-cadence.h | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
index 35e61048e133..0c5813b230b4 100644
--- a/drivers/pci/controller/cadence/pci-j721e.c
+++ b/drivers/pci/controller/cadence/pci-j721e.c
@@ -66,7 +66,7 @@ enum j721e_pcie_mode {
 
 struct j721e_pcie_data {
 	enum j721e_pcie_mode	mode;
-	bool quirk_retrain_flag;
+	unsigned int		quirk_retrain_flag:1;
 };
 
 static inline u32 j721e_pcie_user_readl(struct j721e_pcie *pcie, u32 offset)
diff --git a/drivers/pci/controller/cadence/pcie-cadence.h b/drivers/pci/controller/cadence/pcie-cadence.h
index 30db2d68c17a..bc27d126f239 100644
--- a/drivers/pci/controller/cadence/pcie-cadence.h
+++ b/drivers/pci/controller/cadence/pcie-cadence.h
@@ -303,7 +303,7 @@ struct cdns_pcie_rc {
 	u32			vendor_id;
 	u32			device_id;
 	bool			avail_ib_bar[CDNS_PCIE_RP_MAX_IB];
-	bool                    quirk_retrain_flag;
+	unsigned int		quirk_retrain_flag:1;
 };
 
 /**
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.14 17/32] PCI: j721e: Add PCIe support for J7200

[Sasha Levin]

From: Kishon Vijay Abraham I <kishon@ti.com>

[ Upstream commit f1de58802f0fff364cf49f5e47d1be744baa434f ]

J7200 has the same PCIe IP as in J721E with minor changes in the
wrapper. J7200 allows byte access of bridge configuration space
registers and the register field for LINK_DOWN interrupt is different.
J7200 also requires "quirk_detect_quiet_flag" to be set. Configure these
changes as part of driver data applicable only to J7200.

Link: https://lore.kernel.org/r/20210811123336.31357-4-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/cadence/pci-j721e.c | 40 +++++++++++++++++++---
 1 file changed, 36 insertions(+), 4 deletions(-)

diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
index 0c5813b230b4..10b13b728284 100644
--- a/drivers/pci/controller/cadence/pci-j721e.c
+++ b/drivers/pci/controller/cadence/pci-j721e.c
@@ -27,6 +27,7 @@
 #define STATUS_REG_SYS_2	0x508
 #define STATUS_CLR_REG_SYS_2	0x708
 #define LINK_DOWN		BIT(1)
+#define J7200_LINK_DOWN		BIT(10)
 
 #define J721E_PCIE_USER_CMD_STATUS	0x4
 #define LINK_TRAINING_ENABLE		BIT(0)
@@ -57,6 +58,7 @@ struct j721e_pcie {
 	struct cdns_pcie	*cdns_pcie;
 	void __iomem		*user_cfg_base;
 	void __iomem		*intd_cfg_base;
+	u32			linkdown_irq_regfield;
 };
 
 enum j721e_pcie_mode {
@@ -67,6 +69,9 @@ enum j721e_pcie_mode {
 struct j721e_pcie_data {
 	enum j721e_pcie_mode	mode;
 	unsigned int		quirk_retrain_flag:1;
+	unsigned int		quirk_detect_quiet_flag:1;
+	u32			linkdown_irq_regfield;
+	unsigned int		byte_access_allowed:1;
 };
 
 static inline u32 j721e_pcie_user_readl(struct j721e_pcie *pcie, u32 offset)
@@ -98,12 +103,12 @@ static irqreturn_t j721e_pcie_link_irq_handler(int irq, void *priv)
 	u32 reg;
 
 	reg = j721e_pcie_intd_readl(pcie, STATUS_REG_SYS_2);
-	if (!(reg & LINK_DOWN))
+	if (!(reg & pcie->linkdown_irq_regfield))
 		return IRQ_NONE;
 
 	dev_err(dev, "LINK DOWN!\n");
 
-	j721e_pcie_intd_writel(pcie, STATUS_CLR_REG_SYS_2, LINK_DOWN);
+	j721e_pcie_intd_writel(pcie, STATUS_CLR_REG_SYS_2, pcie->linkdown_irq_regfield);
 	return IRQ_HANDLED;
 }
 
@@ -112,7 +117,7 @@ static void j721e_pcie_config_link_irq(struct j721e_pcie *pcie)
 	u32 reg;
 
 	reg = j721e_pcie_intd_readl(pcie, ENABLE_REG_SYS_2);
-	reg |= LINK_DOWN;
+	reg |= pcie->linkdown_irq_regfield;
 	j721e_pcie_intd_writel(pcie, ENABLE_REG_SYS_2, reg);
 }
 
@@ -284,10 +289,25 @@ static struct pci_ops cdns_ti_pcie_host_ops = {
 static const struct j721e_pcie_data j721e_pcie_rc_data = {
 	.mode = PCI_MODE_RC,
 	.quirk_retrain_flag = true,
+	.byte_access_allowed = false,
+	.linkdown_irq_regfield = LINK_DOWN,
 };
 
 static const struct j721e_pcie_data j721e_pcie_ep_data = {
 	.mode = PCI_MODE_EP,
+	.linkdown_irq_regfield = LINK_DOWN,
+};
+
+static const struct j721e_pcie_data j7200_pcie_rc_data = {
+	.mode = PCI_MODE_RC,
+	.quirk_detect_quiet_flag = true,
+	.linkdown_irq_regfield = J7200_LINK_DOWN,
+	.byte_access_allowed = true,
+};
+
+static const struct j721e_pcie_data j7200_pcie_ep_data = {
+	.mode = PCI_MODE_EP,
+	.quirk_detect_quiet_flag = true,
 };
 
 static const struct of_device_id of_j721e_pcie_match[] = {
@@ -299,6 +319,14 @@ static const struct of_device_id of_j721e_pcie_match[] = {
 		.compatible = "ti,j721e-pcie-ep",
 		.data = &j721e_pcie_ep_data,
 	},
+	{
+		.compatible = "ti,j7200-pcie-host",
+		.data = &j7200_pcie_rc_data,
+	},
+	{
+		.compatible = "ti,j7200-pcie-ep",
+		.data = &j7200_pcie_ep_data,
+	},
 	{},
 };
 
@@ -332,6 +360,7 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 
 	pcie->dev = dev;
 	pcie->mode = mode;
+	pcie->linkdown_irq_regfield = data->linkdown_irq_regfield;
 
 	base = devm_platform_ioremap_resource_byname(pdev, "intd_cfg");
 	if (IS_ERR(base))
@@ -391,9 +420,11 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 			goto err_get_sync;
 		}
 
-		bridge->ops = &cdns_ti_pcie_host_ops;
+		if (!data->byte_access_allowed)
+			bridge->ops = &cdns_ti_pcie_host_ops;
 		rc = pci_host_bridge_priv(bridge);
 		rc->quirk_retrain_flag = data->quirk_retrain_flag;
+		rc->quirk_detect_quiet_flag = data->quirk_detect_quiet_flag;
 
 		cdns_pcie = &rc->pcie;
 		cdns_pcie->dev = dev;
@@ -459,6 +490,7 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 			ret = -ENOMEM;
 			goto err_get_sync;
 		}
+		ep->quirk_detect_quiet_flag = data->quirk_detect_quiet_flag;
 
 		cdns_pcie = &ep->pcie;
 		cdns_pcie->dev = dev;
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.14 18/32] PCI: j721e: Add PCIe support for AM64

[Sasha Levin]

From: Kishon Vijay Abraham I <kishon@ti.com>

[ Upstream commit c8a375a8e15ac31293d7fda08008d6da8f5df3db ]

AM64 has the same PCIe IP as in J7200 with certain erratas not
applicable (quirk_detect_quiet_flag). Add support for "ti,am64-pcie-host"
compatible and "ti,am64-pcie-ep" compatible that is specific to AM64.

Link: https://lore.kernel.org/r/20210811123336.31357-5-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/cadence/pci-j721e.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
index 10b13b728284..ffb176d288cd 100644
--- a/drivers/pci/controller/cadence/pci-j721e.c
+++ b/drivers/pci/controller/cadence/pci-j721e.c
@@ -310,6 +310,17 @@ static const struct j721e_pcie_data j7200_pcie_ep_data = {
 	.quirk_detect_quiet_flag = true,
 };
 
+static const struct j721e_pcie_data am64_pcie_rc_data = {
+	.mode = PCI_MODE_RC,
+	.linkdown_irq_regfield = J7200_LINK_DOWN,
+	.byte_access_allowed = true,
+};
+
+static const struct j721e_pcie_data am64_pcie_ep_data = {
+	.mode = PCI_MODE_EP,
+	.linkdown_irq_regfield = J7200_LINK_DOWN,
+};
+
 static const struct of_device_id of_j721e_pcie_match[] = {
 	{
 		.compatible = "ti,j721e-pcie-host",
@@ -327,6 +338,14 @@ static const struct of_device_id of_j721e_pcie_match[] = {
 		.compatible = "ti,j7200-pcie-ep",
 		.data = &j7200_pcie_ep_data,
 	},
+	{
+		.compatible = "ti,am64-pcie-host",
+		.data = &am64_pcie_rc_data,
+	},
+	{
+		.compatible = "ti,am64-pcie-ep",
+		.data = &am64_pcie_ep_data,
+	},
 	{},
 };
 
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.14 31/32] stmmac: dwmac-loongson:Fix missing return value

[Sasha Levin]

From: zhaoxiao <long870912@gmail.com>

[ Upstream commit 5289de5929d1758a95477a4d160195397ccffa7b ]

Add the return value when phy_mode < 0.

Signed-off-by: zhaoxiao <long870912@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
index 4c9a37dd0d3f..ecf759ee1c9f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
@@ -109,8 +109,10 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
 		plat->bus_id = pci_dev_id(pdev);
 
 	phy_mode = device_get_phy_mode(&pdev->dev);
-	if (phy_mode < 0)
+	if (phy_mode < 0) {
 		dev_err(&pdev->dev, "phy_mode not found\n");
+		return phy_mode;
+	}
 
 	plat->phy_interface = phy_mode;
 	plat->interface = PHY_INTERFACE_MODE_GMII;
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel