From: "Ondřej Jirman" <megous@megous.com>
To: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: mripard@kernel.org, wens@csie.org, airlied@linux.ie,
daniel@ffwll.ch, saravanak@google.com,
dri-devel@lists.freedesktop.org,
linux-arm-kernel@lists.infradead.org,
linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] drm/sun4i: dw-hdmi: Fix HDMI PHY clock setup
Date: Tue, 14 Sep 2021 10:59:22 +0200 [thread overview]
Message-ID: <20210914085922.qxhmr6puvy5d2ceo@core> (raw)
In-Reply-To: <20210913172154.2686-1-jernej.skrabec@gmail.com>
Hello Jernej,
On Mon, Sep 13, 2021 at 07:21:54PM +0200, Jernej Skrabec wrote:
> Recent rework, which made HDMI PHY driver a platform device, inadvertely
> reversed clock setup order. HW is very touchy about it. Proper way is to
> handle controllers resets and clocks first and HDMI PHYs second.
>
> Currently, without this fix, first mode set completely fails (nothing on
> HDMI monitor) on H3 era PHYs. On H6, it still somehow work.
>
> Move HDMI PHY reset & clocks handling to sun8i_hdmi_phy_init() which
> will assure that code is executed after controllers reset & clocks are
> handled. Additionally, add sun8i_hdmi_phy_deinit() which will deinit
> them at controllers driver unload.
>
> Tested on A64, H3, H6 and R40.
>
> Fixes: 9bf3797796f5 ("drm/sun4i: dw-hdmi: Make HDMI PHY into a platform device")
> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
> ---
> drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c | 7 +-
> drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h | 4 +-
> drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 97 ++++++++++++++------------
> 3 files changed, 61 insertions(+), 47 deletions(-)
>
> diff --git a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c
> index f75fb157f2ff..5fa5407ac583 100644
> --- a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c
> +++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c
> @@ -216,11 +216,13 @@ static int sun8i_dw_hdmi_bind(struct device *dev, struct device *master,
> goto err_disable_clk_tmds;
> }
^^^ This looks like...
> + ret = sun8i_hdmi_phy_init(hdmi->phy);
> + if (ret)
> + return ret;
... you need 'goto err_disable_clk_tmds;' here, instead.
> +
> drm_encoder_helper_add(encoder, &sun8i_dw_hdmi_encoder_helper_funcs);
> drm_simple_encoder_init(drm, encoder, DRM_MODE_ENCODER_TMDS);
>
> - sun8i_hdmi_phy_init(hdmi->phy);
> -
> plat_data->mode_valid = hdmi->quirks->mode_valid;
> plat_data->use_drm_infoframe = hdmi->quirks->use_drm_infoframe;
> sun8i_hdmi_phy_set_ops(hdmi->phy, plat_data);
> @@ -262,6 +264,7 @@ static void sun8i_dw_hdmi_unbind(struct device *dev, struct device *master,
> struct sun8i_dw_hdmi *hdmi = dev_get_drvdata(dev);
>
> dw_hdmi_unbind(hdmi->hdmi);
> + sun8i_hdmi_phy_deinit(hdmi->phy);
> clk_disable_unprepare(hdmi->clk_tmds);
> reset_control_assert(hdmi->rst_ctrl);
> gpiod_set_value(hdmi->ddc_en, 0);
> diff --git a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
> index 74f6ed0e2570..bffe1b9cd3dc 100644
> --- a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
> +++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
> @@ -169,6 +169,7 @@ struct sun8i_hdmi_phy {
> struct clk *clk_phy;
> struct clk *clk_pll0;
> struct clk *clk_pll1;
> + struct device *dev;
> unsigned int rcal;
> struct regmap *regs;
> struct reset_control *rst_phy;
> @@ -205,7 +206,8 @@ encoder_to_sun8i_dw_hdmi(struct drm_encoder *encoder)
>
> int sun8i_hdmi_phy_get(struct sun8i_dw_hdmi *hdmi, struct device_node *node);
>
> -void sun8i_hdmi_phy_init(struct sun8i_hdmi_phy *phy);
> +int sun8i_hdmi_phy_init(struct sun8i_hdmi_phy *phy);
> +void sun8i_hdmi_phy_deinit(struct sun8i_hdmi_phy *phy);
> void sun8i_hdmi_phy_set_ops(struct sun8i_hdmi_phy *phy,
> struct dw_hdmi_plat_data *plat_data);
>
> diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
> index c9239708d398..78b152973957 100644
> --- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
> +++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
> @@ -506,9 +506,60 @@ static void sun8i_hdmi_phy_init_h3(struct sun8i_hdmi_phy *phy)
> phy->rcal = (val & SUN8I_HDMI_PHY_ANA_STS_RCAL_MASK) >> 2;
> }
>
> -void sun8i_hdmi_phy_init(struct sun8i_hdmi_phy *phy)
> +int sun8i_hdmi_phy_init(struct sun8i_hdmi_phy *phy)
> {
> + int ret;
> +
> + ret = reset_control_deassert(phy->rst_phy);
> + if (ret) {
> + dev_err(phy->dev, "Cannot deassert phy reset control: %d\n", ret);
> + return ret;
> + }
> +
> + ret = clk_prepare_enable(phy->clk_bus);
> + if (ret) {
> + dev_err(phy->dev, "Cannot enable bus clock: %d\n", ret);
> + goto err_deassert_rst_phy;
I know it was there before, but please:
s/deassert/assert/
kind regards,
o.
> + }
> +
> + ret = clk_prepare_enable(phy->clk_mod);
> + if (ret) {
> + dev_err(phy->dev, "Cannot enable mod clock: %d\n", ret);
> + goto err_disable_clk_bus;
> + }
> +
> + if (phy->variant->has_phy_clk) {
> + ret = sun8i_phy_clk_create(phy, phy->dev,
> + phy->variant->has_second_pll);
> + if (ret) {
> + dev_err(phy->dev, "Couldn't create the PHY clock\n");
> + goto err_disable_clk_mod;
> + }
> +
> + clk_prepare_enable(phy->clk_phy);
> + }
> +
> phy->variant->phy_init(phy);
> +
> + return 0;
> +
> +err_disable_clk_mod:
> + clk_disable_unprepare(phy->clk_mod);
> +err_disable_clk_bus:
> + clk_disable_unprepare(phy->clk_bus);
> +err_deassert_rst_phy:
> + reset_control_assert(phy->rst_phy);
> +
> + return ret;
> +}
> +
>
> [......]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-09-14 9:01 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-13 17:21 [PATCH] drm/sun4i: dw-hdmi: Fix HDMI PHY clock setup Jernej Skrabec
2021-09-14 8:59 ` Ondřej Jirman [this message]
2021-09-14 15:42 ` Jernej Škrabec
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210914085922.qxhmr6puvy5d2ceo@core \
--to=megous@megous.com \
--cc=airlied@linux.ie \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=jernej.skrabec@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=mripard@kernel.org \
--cc=saravanak@google.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).