public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: "Paweł Anikiel" <pan@semihalf.com>
To: arnd@arndb.de, olof@lixom.net, soc@kernel.org,
	robh+dt@kernel.org, dinguyen@kernel.org
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, upstream@semihalf.com,
	mw@semihalf.com, ka@semihalf.com, jam@semihalf.com,
	tn@semihalf.com, amstan@google.com,
	"Paweł Anikiel" <pan@semihalf.com>,
	"Joanna Brozek" <jbrozek@antmicro.com>,
	"Mariusz Glebocki" <mglebocki@antmicro.com>,
	"Tomasz Gorochowik" <tgorochowik@antmicro.com>,
	"Maciej Mikunda" <mmikunda@antmicro.com>
Subject: [PATCH v5 1/1] dts: socfpga: Add Mercury+ AA1 devicetree
Date: Thu, 21 Oct 2021 17:17:36 +0200	[thread overview]
Message-ID: <20211021151736.2096926-2-pan@semihalf.com> (raw)
In-Reply-To: <20211021151736.2096926-1-pan@semihalf.com>

Add support for the Mercury+ AA1 module for Arria 10 SoC FPGA.

Signed-off-by: Paweł Anikiel <pan@semihalf.com>
Signed-off-by: Joanna Brozek <jbrozek@antmicro.com>
Signed-off-by: Mariusz Glebocki <mglebocki@antmicro.com>
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Signed-off-by: Maciej Mikunda <mmikunda@antmicro.com>
---
 arch/arm/boot/dts/Makefile                    |   1 +
 .../boot/dts/socfpga_arria10_mercury_aa1.dts  | 112 ++++++++++++++++++
 2 files changed, 113 insertions(+)
 create mode 100644 arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 7e0934180724..803702883122 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1075,6 +1075,7 @@ dtb-$(CONFIG_ARCH_S5PV210) += \
 	s5pv210-torbreck.dtb
 dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += \
 	socfpga_arria5_socdk.dtb \
+	socfpga_arria10_mercury_aa1.dtb \
 	socfpga_arria10_socdk_nand.dtb \
 	socfpga_arria10_socdk_qspi.dtb \
 	socfpga_arria10_socdk_sdmmc.dtb \
diff --git a/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dts b/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dts
new file mode 100644
index 000000000000..2a3364b26361
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dts
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "socfpga_arria10.dtsi"
+
+/ {
+
+	model = "Enclustra Mercury AA1";
+	compatible = "altr,socfpga-arria10", "altr,socfpga";
+
+	aliases {
+		ethernet0 = &gmac0;
+		serial1 = &uart1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x80000000>; /* 2GB */
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+};
+
+&eccmgr {
+	sdmmca-ecc@ff8c2c00 {
+		compatible = "altr,socfpga-sdmmc-ecc";
+		reg = <0xff8c2c00 0x400>;
+		altr,ecc-parent = <&mmc>;
+		interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
+			     <47 IRQ_TYPE_LEVEL_HIGH>,
+			     <16 IRQ_TYPE_LEVEL_HIGH>,
+			     <48 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&gmac0 {
+	phy-mode = "rgmii";
+	phy-addr = <0xffffffff>; /* probe for phy addr */
+
+	max-frame-size = <3800>;
+	status = "okay";
+
+	phy-handle = <&phy3>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy3: ethernet-phy@3 {
+			txd0-skew-ps = <0>; /* -420ps */
+			txd1-skew-ps = <0>; /* -420ps */
+			txd2-skew-ps = <0>; /* -420ps */
+			txd3-skew-ps = <0>; /* -420ps */
+			rxd0-skew-ps = <420>; /* 0ps */
+			rxd1-skew-ps = <420>; /* 0ps */
+			rxd2-skew-ps = <420>; /* 0ps */
+			rxd3-skew-ps = <420>; /* 0ps */
+			txen-skew-ps = <0>; /* -420ps */
+			txc-skew-ps = <1860>; /* 960ps */
+			rxdv-skew-ps = <420>; /* 0ps */
+			rxc-skew-ps = <1680>; /* 780ps */
+			reg = <3>;
+		};
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	isl12022: isl12022@6f {
+		status = "okay";
+		compatible = "isil,isl12022";
+		reg = <0x6f>;
+	};
+};
+
+/* Following mappings are taken from arria10 socdk dts */
+&mmc {
+	status = "okay";
+	cap-sd-highspeed;
+	broken-cd;
+	bus-width = <4>;
+};
+
+&osc1 {
+	clock-frequency = <33330000>;
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2021-10-21 15:26 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-21 15:17 [PATCH v5 0/1] Add support for the Mercury+ AA1 module Paweł Anikiel
2021-10-21 15:17 ` Paweł Anikiel [this message]
2021-10-21 15:34   ` [PATCH v5 1/1] dts: socfpga: Add Mercury+ AA1 devicetree Arnd Bergmann
2021-10-21 22:10     ` Dinh Nguyen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211021151736.2096926-2-pan@semihalf.com \
    --to=pan@semihalf.com \
    --cc=amstan@google.com \
    --cc=arnd@arndb.de \
    --cc=devicetree@vger.kernel.org \
    --cc=dinguyen@kernel.org \
    --cc=jam@semihalf.com \
    --cc=jbrozek@antmicro.com \
    --cc=ka@semihalf.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mglebocki@antmicro.com \
    --cc=mmikunda@antmicro.com \
    --cc=mw@semihalf.com \
    --cc=olof@lixom.net \
    --cc=robh+dt@kernel.org \
    --cc=soc@kernel.org \
    --cc=tgorochowik@antmicro.com \
    --cc=tn@semihalf.com \
    --cc=upstream@semihalf.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox