From: Mark Rutland <mark.rutland@arm.com>
To: linux-arm-kernel@lists.infradead.org
Cc: alexandru.elisei@arm.com, catalin.marinas@arm.com,
james.morse@arm.com, mark.rutland@arm.com, maz@kernel.org,
stable@vger.kernel.org, suzuki.poulose@arm.com, will@kernel.org
Subject: [PATCH] arm64/kvm: extract ESR_ELx.EC only
Date: Wed, 3 Nov 2021 11:05:45 +0000 [thread overview]
Message-ID: <20211103110545.4613-1-mark.rutland@arm.com> (raw)
Since ARMv8.0 the upper 32 bits of ESR_ELx have been RES0, and recently
some of the upper bits gained a meaning and can be non-zero. For
example, when FEAT_LS64 is implemented, ESR_ELx[36:32] contain ISS2,
which for an ST64BV or ST64BV0 can be non-zero. This can be seen in ARM
DDI 0487G.b, page D13-3145, section D13.2.37.
Generally, we must not rely on RES0 bit remaining zero in future, and
when extracting ESR_ELx.EC we must mask out all other bits.
All C code uses the ESR_ELx_EC() macro, which masks out the irrelevant
bits, and therefore no alterations are required to C code to avoid
consuming irrelevant bits.
In a couple of places the KVM assembly extracts ESR_ELx.EC using LSR on
an X register, and so could in theory consume previously RES0 bits. In
both cases this is for comparison with EC values ESR_ELx_EC_HVC32 and
ESR_ELx_EC_HVC64, for which the upper bits of ESR_ELx must currently be
zero, but this could change in future.
This patch adjusts the KVM vectors to use UBFX rather than LSR to
extract ESR_ELx.EC, ensuring these are robust to future additions to
ESR_ELx.
Cc: stable@vger.kernel.org
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
---
arch/arm64/include/asm/esr.h | 1 +
arch/arm64/kvm/hyp/hyp-entry.S | 2 +-
arch/arm64/kvm/hyp/nvhe/host.S | 2 +-
3 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/include/asm/esr.h b/arch/arm64/include/asm/esr.h
index a305ce256090..d52a0b269ee8 100644
--- a/arch/arm64/include/asm/esr.h
+++ b/arch/arm64/include/asm/esr.h
@@ -68,6 +68,7 @@
#define ESR_ELx_EC_MAX (0x3F)
#define ESR_ELx_EC_SHIFT (26)
+#define ESR_ELx_EC_WIDTH (6)
#define ESR_ELx_EC_MASK (UL(0x3F) << ESR_ELx_EC_SHIFT)
#define ESR_ELx_EC(esr) (((esr) & ESR_ELx_EC_MASK) >> ESR_ELx_EC_SHIFT)
diff --git a/arch/arm64/kvm/hyp/hyp-entry.S b/arch/arm64/kvm/hyp/hyp-entry.S
index 9aa9b73475c9..b6b6801d96d5 100644
--- a/arch/arm64/kvm/hyp/hyp-entry.S
+++ b/arch/arm64/kvm/hyp/hyp-entry.S
@@ -44,7 +44,7 @@
el1_sync: // Guest trapped into EL2
mrs x0, esr_el2
- lsr x0, x0, #ESR_ELx_EC_SHIFT
+ ubfx x0, x0, #ESR_ELx_EC_SHIFT, #ESR_ELx_EC_WIDTH
cmp x0, #ESR_ELx_EC_HVC64
ccmp x0, #ESR_ELx_EC_HVC32, #4, ne
b.ne el1_trap
diff --git a/arch/arm64/kvm/hyp/nvhe/host.S b/arch/arm64/kvm/hyp/nvhe/host.S
index 4b652ffb591d..d310d2b2c8b4 100644
--- a/arch/arm64/kvm/hyp/nvhe/host.S
+++ b/arch/arm64/kvm/hyp/nvhe/host.S
@@ -115,7 +115,7 @@ SYM_FUNC_END(__hyp_do_panic)
.L__vect_start\@:
stp x0, x1, [sp, #-16]!
mrs x0, esr_el2
- lsr x0, x0, #ESR_ELx_EC_SHIFT
+ ubfx x0, x0, #ESR_ELx_EC_SHIFT, #ESR_ELx_EC_WIDTH
cmp x0, #ESR_ELx_EC_HVC64
b.ne __host_exit
--
2.11.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-11-03 11:07 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-03 11:05 Mark Rutland [this message]
2021-11-08 10:07 ` [PATCH] arm64/kvm: extract ESR_ELx.EC only Will Deacon
2021-11-08 10:42 ` Marc Zyngier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211103110545.4613-1-mark.rutland@arm.com \
--to=mark.rutland@arm.com \
--cc=alexandru.elisei@arm.com \
--cc=catalin.marinas@arm.com \
--cc=james.morse@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=maz@kernel.org \
--cc=stable@vger.kernel.org \
--cc=suzuki.poulose@arm.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox