From: Jim Quinlan <jim2101024@gmail.com>
To: linux-pci@vger.kernel.org,
Nicolas Saenz Julienne <nsaenz@kernel.org>,
Rob Herring <robh@kernel.org>, Mark Brown <broonie@kernel.org>,
bcm-kernel-feedback-list@broadcom.com, jim2101024@gmail.com,
james.quinlan@broadcom.com
Cc: "Florian Fainelli" <f.fainelli@gmail.com>,
"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
"Krzysztof Wilczyński" <kw@linux.com>,
"Bjorn Helgaas" <bhelgaas@google.com>,
linux-rpi-kernel@lists.infradead.org (moderated list:BROADCOM
BCM2711/BCM2835 ARM ARCHITECTURE),
linux-arm-kernel@lists.infradead.org (moderated list:BROADCOM
BCM2711/BCM2835 ARM ARCHITECTURE),
linux-kernel@vger.kernel.org (open list)
Subject: [PATCH v7 6/7] PCI: brcmstb: Do not turn off regulators if EP can wake up
Date: Wed, 3 Nov 2021 14:49:36 -0400 [thread overview]
Message-ID: <20211103184939.45263-7-jim2101024@gmail.com> (raw)
In-Reply-To: <20211103184939.45263-1-jim2101024@gmail.com>
If any downstream device may wake up during S2/S3 suspend, we do not want
to turn off its power when suspending.
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
---
drivers/pci/controller/pcie-brcmstb.c | 43 +++++++++++++++++++++++++--
1 file changed, 41 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index aaf6a4cbeb78..9aadb0eccfff 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -307,8 +307,20 @@ struct brcm_pcie {
void (*bridge_sw_init_set)(struct brcm_pcie *pcie, u32 val);
struct regulator_bulk_data supplies[ARRAY_SIZE(supplies)];
unsigned int num_supplies;
+ bool ep_wakeup_capable;
};
+static int pci_dev_may_wakeup(struct pci_dev *dev, void *data)
+{
+ bool *ret = data;
+
+ if (device_may_wakeup(&dev->dev)) {
+ *ret = true;
+ dev_dbg(&dev->dev, "disable cancelled for wake-up device\n");
+ }
+ return (int) *ret;
+}
+
static int brcm_regulators_on(struct brcm_pcie *pcie)
{
struct device *dev = pcie->dev;
@@ -316,6 +328,18 @@ static int brcm_regulators_on(struct brcm_pcie *pcie)
if (!pcie->num_supplies)
return 0;
+
+ if (pcie->ep_wakeup_capable) {
+ /*
+ * We are resuming from a suspend. In the previous suspend
+ * we did not disable the power supplies, so there is no
+ * need to enable them (and falsely increase their usage
+ * count).
+ */
+ pcie->ep_wakeup_capable = false;
+ return 0;
+ }
+
ret = regulator_bulk_enable(pcie->num_supplies, pcie->supplies);
if (ret)
dev_err(dev, "failed to enable EP regulators\n");
@@ -323,13 +347,28 @@ static int brcm_regulators_on(struct brcm_pcie *pcie)
return ret;
}
-static int brcm_regulators_off(struct brcm_pcie *pcie)
+static int brcm_regulators_off(struct brcm_pcie *pcie, bool force)
{
+ struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie);
struct device *dev = pcie->dev;
int ret;
if (!pcie->num_supplies)
return 0;
+
+ pcie->ep_wakeup_capable = false;
+
+ if (!force && bridge->bus && brcm_pcie_link_up(pcie)) {
+ /*
+ * If at least one device on this bus is enabled as a
+ * wake-up source, do not turn off regulators.
+ */
+ pci_walk_bus(bridge->bus, pci_dev_may_wakeup,
+ &pcie->ep_wakeup_capable);
+ if (pcie->ep_wakeup_capable)
+ return 0;
+ }
+
ret = regulator_bulk_disable(pcie->num_supplies, pcie->supplies);
if (ret)
dev_err(dev, "failed to disable EP regulators\n");
@@ -1241,7 +1280,7 @@ static int brcm_pcie_suspend(struct device *dev)
reset_control_rearm(pcie->rescal);
clk_disable_unprepare(pcie->clk);
- return brcm_regulators_off(pcie);
+ return brcm_regulators_off(pcie, false);
}
static int brcm_pcie_resume(struct device *dev)
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-11-03 18:52 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-03 18:49 [PATCH v7 0/7] PCI: brcmstb: have host-bridge turn on sub-device power Jim Quinlan
2021-11-03 18:49 ` [PATCH v7 1/7] dt-bindings: PCI: Correct brcmstb interrupts, interrupt-map Jim Quinlan
2021-11-03 18:49 ` [PATCH v7 2/7] dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators Jim Quinlan
2021-11-03 18:49 ` [PATCH v7 3/7] PCI: brcmstb: Split brcm_pcie_setup() into two funcs Jim Quinlan
2021-11-03 18:49 ` [PATCH v7 5/7] PCI: brcmstb: Add control of subdevice voltage regulators Jim Quinlan
2021-11-03 19:45 ` Mark Brown
2021-11-03 20:25 ` Jim Quinlan
2021-11-03 20:34 ` Jim Quinlan
2021-11-03 21:52 ` Mark Brown
2021-11-03 21:53 ` Jim Quinlan
2021-11-04 15:13 ` Rob Herring
2021-11-03 18:49 ` Jim Quinlan [this message]
2021-11-03 18:49 ` [PATCH v7 7/7] PCI: brcmstb: Change brcm_phy_stop() to return void Jim Quinlan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211103184939.45263-7-jim2101024@gmail.com \
--to=jim2101024@gmail.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=bhelgaas@google.com \
--cc=broonie@kernel.org \
--cc=f.fainelli@gmail.com \
--cc=james.quinlan@broadcom.com \
--cc=kw@linux.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=nsaenz@kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox