From: Oskar Senft <osk@google.com>
To: linux-arm-kernel@lists.infradead.org,
linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>, Joel Stanley <joel@jms.id.au>,
Andrew Jeffery <andrew@aj.id.au>, Oskar Senft <osk@google.com>
Subject: [PATCH] ARM: dts: aspeed: tyan-s7106: Update nct7802 config
Date: Thu, 4 Nov 2021 17:09:14 -0400 [thread overview]
Message-ID: <20211104210914.4160448-1-osk@google.com> (raw)
This change updates the configuration for the nct7802 hardware
monitor to correctly configure its temperature sensors.
Signed-off-by: Oskar Senft <osk@google.com>
---
arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts | 23 +++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts b/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts
index 68f332ee1886..fc1585f34a57 100644
--- a/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts
@@ -213,6 +213,29 @@ &i2c0 {
nct7802@28 {
compatible = "nuvoton,nct7802";
reg = <0x28>;
+ channel@0 { /* LTD */
+ reg = <0>;
+ status = "okay";
+ };
+ channel@1 { /* RTD1 */
+ reg = <1>;
+ status = "okay";
+ sensor-type = "temperature";
+ temperature-mode = "thermistor";
+ };
+
+ channel@2 { /* RTD2 */
+ reg = <2>;
+ status = "okay";
+ sensor-type = "temperature";
+ temperature-mode = "thermistor";
+ };
+
+ channel@3 { /* RTD3 */
+ reg = <3>;
+ status = "okay";
+ sensor-type = "temperature";
+ };
};
/* Also connected to:
--
2.34.0.rc0.344.g81b53c2807-goog
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-11-04 21:11 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-04 21:09 Oskar Senft [this message]
2021-11-04 22:03 ` [PATCH] ARM: dts: aspeed: tyan-s7106: Update nct7802 config Joel Stanley
2021-11-05 1:01 ` Oskar Senft
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211104210914.4160448-1-osk@google.com \
--to=osk@google.com \
--cc=andrew@aj.id.au \
--cc=joel@jms.id.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox