From: Bjorn Helgaas <helgaas@kernel.org>
To: Marc Zyngier <maz@kernel.org>
Cc: linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-pci@vger.kernel.org,
kernel-team@android.com,
"Alyssa Rosenzweig" <alyssa@rosenzweig.io>,
"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Pali Rohár" <pali@kernel.org>
Subject: Re: [PATCH] PCI: apple: Reset the port for 100ms on probe
Date: Wed, 17 Nov 2021 14:12:45 -0600 [thread overview]
Message-ID: <20211117201245.GA1768803@bhelgaas> (raw)
In-Reply-To: <20211117160053.232158-1-maz@kernel.org>
[+cc Pali]
On Wed, Nov 17, 2021 at 04:00:53PM +0000, Marc Zyngier wrote:
> While the Apple PCIe driver works correctly when directly booted
> from the firmware, it fails to initialise when the kernel is booted
> from a bootloader using PCIe such as u-boot.
>
> That's beacuse we're missing a proper reset of the port (we only
> clear the reset, but never assert it).
s/beacuse/because/
> Bring the port back to life by wiggling the #PERST pin for 100ms
> (as per the spec).
I cc'd Pali because I think he's interested in consolidating or
somehow rationalizing delays like this.
If we have a specific spec reference here, I think it would help that
effort. I *think* it's PCIe r5.0, sec 6.6.1, which mentions the 100ms
along with some additional constraints, like waiting 100ms after Link
training completes for ports that support > 5.0 GT/s, whether
Readiness Notifications are used, and CRS Software Visiblity.
> Fixes: 1e33888fbe44 ("PCI: apple: Add initial hardware bring-up")
> Signed-off-by: Marc Zyngier <maz@kernel.org>
> Cc: Alyssa Rosenzweig <alyssa@rosenzweig.io>
> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> Cc: Bjorn Helgaas <bhelgaas@google.com>
> ---
> drivers/pci/controller/pcie-apple.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/drivers/pci/controller/pcie-apple.c b/drivers/pci/controller/pcie-apple.c
> index 1bf4d75b61be..bbea5f6e0a68 100644
> --- a/drivers/pci/controller/pcie-apple.c
> +++ b/drivers/pci/controller/pcie-apple.c
> @@ -543,6 +543,9 @@ static int apple_pcie_setup_port(struct apple_pcie *pcie,
> if (ret < 0)
> return ret;
>
> + /* Hold #PERST for 100ms as per the spec */
> + gpiod_set_value(reset, 0);
> + msleep(100);
> rmw_set(PORT_PERST_OFF, port->base + PORT_PERST);
> gpiod_set_value(reset, 1);
>
> --
> 2.30.2
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-11-17 20:14 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-17 16:00 [PATCH] PCI: apple: Reset the port for 100ms on probe Marc Zyngier
2021-11-17 20:12 ` Bjorn Helgaas [this message]
2021-11-17 20:28 ` Pali Rohár
2021-11-18 10:01 ` Marc Zyngier
2021-11-18 10:31 ` Pali Rohár
2021-11-18 12:57 ` Marc Zyngier
2021-11-20 11:32 ` Pali Rohár
2021-11-18 10:45 ` Marc Zyngier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211117201245.GA1768803@bhelgaas \
--to=helgaas@kernel.org \
--cc=alyssa@rosenzweig.io \
--cc=bhelgaas@google.com \
--cc=kernel-team@android.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=maz@kernel.org \
--cc=pali@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).