From: Nicolas Saenz Julienne <nsaenzju@redhat.com>
To: linux-arm-kernel@lists.infradead.org, maz@kernel.org,
rostedt@goodmis.org
Cc: james.morse@arm.com, alexandru.elisei@arm.com,
suzuki.poulose@arm.com, catalin.marinas@arm.com, will@kernel.org,
nsaenzju@redhat.com, linux-kernel@vger.kernel.org,
kvmarm@lists.cs.columbia.edu, mingo@redhat.com,
mtosatti@redhat.com, nilal@redhat.com
Subject: [RFC PATCH 1/2] arm64/tracing: add cntvct based trace clock
Date: Fri, 19 Nov 2021 11:21:17 +0100 [thread overview]
Message-ID: <20211119102117.22304-2-nsaenzju@redhat.com> (raw)
In-Reply-To: <20211119102117.22304-1-nsaenzju@redhat.com>
Add a new arm64-specific trace clock using the cntvct register, similar
to x64-tsc. This gives us:
- A clock that is relatively fast (1GHz on armv8.6, 1-50MHz otherwise),
monotonic, and resilient to low power modes.
- It can be used to correlate events across cpus as well as across
hypervisor and guests.
By using arch_timer_read_counter() we make sure that armv8.6 cpus use
the less expensive CNTVCTSS_EL0, which cannot be accessed speculatively.
Signed-off-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
---
arch/arm64/include/asm/trace_clock.h | 12 ++++++++++++
arch/arm64/kernel/Makefile | 2 +-
arch/arm64/kernel/trace_clock.c | 12 ++++++++++++
3 files changed, 25 insertions(+), 1 deletion(-)
create mode 100644 arch/arm64/include/asm/trace_clock.h
create mode 100644 arch/arm64/kernel/trace_clock.c
diff --git a/arch/arm64/include/asm/trace_clock.h b/arch/arm64/include/asm/trace_clock.h
new file mode 100644
index 000000000000..ce4a66d63108
--- /dev/null
+++ b/arch/arm64/include/asm/trace_clock.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_ARM64_TRACE_CLOCK_H
+#define _ASM_ARM64_TRACE_CLOCK_H
+
+#include <linux/types.h>
+
+extern u64 notrace trace_clock_arm64_cntvct(void);
+
+# define ARCH_TRACE_CLOCKS \
+ { trace_clock_arm64_cntvct, "cntvct", .in_ns = 0 },
+
+#endif /* _ASM_ARM64_TRACE_CLOCK_H */
diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile
index 88b3e2a21408..ec9180f0ac90 100644
--- a/arch/arm64/kernel/Makefile
+++ b/arch/arm64/kernel/Makefile
@@ -29,7 +29,7 @@ obj-y := debug-monitors.o entry.o irq.o fpsimd.o \
cpufeature.o alternative.o cacheinfo.o \
smp.o smp_spin_table.o topology.o smccc-call.o \
syscall.o proton-pack.o idreg-override.o idle.o \
- patching.o
+ patching.o trace_clock.o
targets += efi-entry.o
diff --git a/arch/arm64/kernel/trace_clock.c b/arch/arm64/kernel/trace_clock.c
new file mode 100644
index 000000000000..fe1315f368cb
--- /dev/null
+++ b/arch/arm64/kernel/trace_clock.c
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * arm64 trace clocks
+ */
+#include <asm/trace_clock.h>
+
+#include <clocksource/arm_arch_timer.h>
+
+u64 notrace trace_clock_arm64_cntvct(void)
+{
+ return arch_timer_read_counter();
+}
--
2.33.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-11-19 10:23 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-19 10:21 [RFC PATCH 0/2] KVM: arm64: Host/Guest trace syncronization Nicolas Saenz Julienne
2021-11-19 10:21 ` Nicolas Saenz Julienne [this message]
2021-11-19 11:26 ` [RFC PATCH 1/2] arm64/tracing: add cntvct based trace clock Marcelo Tosatti
2021-11-19 12:00 ` Marc Zyngier
2021-11-19 13:26 ` Nicolas Saenz Julienne
2021-11-22 14:57 ` Steven Rostedt
2021-11-24 9:45 ` Nicolas Saenz Julienne
2021-11-19 10:21 ` [RFC PATCH 2/2] KVM: arm64: export cntvoff in debugfs Nicolas Saenz Julienne
2021-11-19 11:11 ` Marcelo Tosatti
2021-11-19 12:17 ` Marc Zyngier
2021-11-19 12:59 ` Marcelo Tosatti
2021-11-19 13:31 ` Marc Zyngier
2021-11-22 20:40 ` Nicolas Saenz Julienne
2021-11-23 11:09 ` Marc Zyngier
2021-11-29 12:47 ` Marcelo Tosatti
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211119102117.22304-2-nsaenzju@redhat.com \
--to=nsaenzju@redhat.com \
--cc=alexandru.elisei@arm.com \
--cc=catalin.marinas@arm.com \
--cc=james.morse@arm.com \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maz@kernel.org \
--cc=mingo@redhat.com \
--cc=mtosatti@redhat.com \
--cc=nilal@redhat.com \
--cc=rostedt@goodmis.org \
--cc=suzuki.poulose@arm.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).