From: "Pali Rohár" <pali@kernel.org>
To: "Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Wilczyński" <kw@linux.com>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Marek Behún" <kabel@kernel.org>
Cc: linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 4/6] PCI: pci-bridge-emul: Fix definitions of reserved bits
Date: Wed, 24 Nov 2021 16:59:42 +0100 [thread overview]
Message-ID: <20211124155944.1290-5-pali@kernel.org> (raw)
In-Reply-To: <20211124155944.1290-1-pali@kernel.org>
Some bits in PCI_EXP registers are reserved for non-root ports. Driver
pci-bridge-emul.c implements PCIe Root Port device therefore it should not
allow setting reserved bits of registers.
Properly define non-reserved bits for all PCI_EXP registers.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 23a5fba4d941 ("PCI: Introduce PCI bridge emulated config space common logic")
Cc: stable@vger.kernel.org
---
drivers/pci/pci-bridge-emul.c | 36 ++++++++++++++++++++++++-----------
1 file changed, 25 insertions(+), 11 deletions(-)
diff --git a/drivers/pci/pci-bridge-emul.c b/drivers/pci/pci-bridge-emul.c
index 31ff7448bded..9a348f99641b 100644
--- a/drivers/pci/pci-bridge-emul.c
+++ b/drivers/pci/pci-bridge-emul.c
@@ -176,41 +176,55 @@ struct pci_bridge_reg_behavior pcie_cap_regs_behavior[PCI_CAP_PCIE_SIZEOF / 4] =
[PCI_CAP_LIST_ID / 4] = {
/*
* Capability ID, Next Capability Pointer and
- * Capabilities register are all read-only.
+ * bits [14:0] of Capabilities register are all read-only.
+ * Bit 15 of Capabilities register is reserved.
*/
- .ro = ~0,
+ .ro = GENMASK(30, 0),
},
[PCI_EXP_DEVCAP / 4] = {
- .ro = ~0,
+ /*
+ * Bits [31:29] and [17:16] are reserved.
+ * Bits [27:18] are reserved for non-upstream ports.
+ * Bits 28 and [14:6] are reserved for non-endpoint devices.
+ * Other bits are read-only.
+ */
+ .ro = BIT(15) | GENMASK(5, 0),
},
[PCI_EXP_DEVCTL / 4] = {
- /* Device control register is RW */
- .rw = GENMASK(15, 0),
+ /*
+ * Device control register is RW, except bit 15 which is
+ * reserved for non-endpoints or non-PCIe-to-PCI/X bridges.
+ */
+ .rw = GENMASK(14, 0),
/*
* Device status register has bits 6 and [3:0] W1C, [5:4] RO,
- * the rest is reserved
+ * the rest is reserved. Also bit 6 is reserved for non-upstream
+ * ports.
*/
- .w1c = (BIT(6) | GENMASK(3, 0)) << 16,
+ .w1c = GENMASK(3, 0) << 16,
.ro = GENMASK(5, 4) << 16,
},
[PCI_EXP_LNKCAP / 4] = {
- /* All bits are RO, except bit 23 which is reserved */
- .ro = lower_32_bits(~BIT(23)),
+ /*
+ * All bits are RO, except bit 23 which is reserved and
+ * bit 18 which is reserved for non-upstream ports.
+ */
+ .ro = lower_32_bits(~(BIT(23) | PCI_EXP_LNKCAP_CLKPM)),
},
[PCI_EXP_LNKCTL / 4] = {
/*
* Link control has bits [15:14], [11:3] and [1:0] RW, the
- * rest is reserved.
+ * rest is reserved. Bit 8 is reserved for non-upstream ports.
*
* Link status has bits [13:0] RO, and bits [15:14]
* W1C.
*/
- .rw = GENMASK(15, 14) | GENMASK(11, 3) | GENMASK(1, 0),
+ .rw = GENMASK(15, 14) | GENMASK(11, 9) | GENMASK(7, 3) | GENMASK(1, 0),
.ro = GENMASK(13, 0) << 16,
.w1c = GENMASK(15, 14) << 16,
},
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-11-24 16:02 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-24 15:59 [PATCH 0/6] PCI: pci-bridge-emul: Various fixes Pali Rohár
2021-11-24 15:59 ` [PATCH 1/6] PCI: pci-bridge-emul: Make expansion ROM Base Address register read-only Pali Rohár
2021-11-24 15:59 ` [PATCH 2/6] PCI: pci-bridge-emul: Properly mark reserved PCIe bits in PCI config space Pali Rohár
2021-11-24 15:59 ` [PATCH 3/6] PCI: pci-bridge-emul: Add definitions for missing capabilities registers Pali Rohár
2021-11-24 15:59 ` Pali Rohár [this message]
2021-11-24 15:59 ` [PATCH 5/6] PCI: pci-bridge-emul: Correctly set PCIe capabilities Pali Rohár
2021-11-24 15:59 ` [PATCH 6/6] PCI: pci-bridge-emul: Set PCI_STATUS_CAP_LIST for PCIe device Pali Rohár
2021-11-30 13:26 ` [PATCH 0/6] PCI: pci-bridge-emul: Various fixes Marek Behún
2021-12-02 20:20 ` Pali Rohár
2021-12-06 12:19 ` Lorenzo Pieralisi
2021-12-06 12:24 ` Pali Rohár
2021-12-06 14:26 ` Lorenzo Pieralisi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211124155944.1290-5-pali@kernel.org \
--to=pali@kernel.org \
--cc=bhelgaas@google.com \
--cc=kabel@kernel.org \
--cc=kw@linux.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=robh@kernel.org \
--cc=thomas.petazzoni@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).