linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Mark Brown <broonie@kernel.org>
To: Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will@kernel.org>,
	Shuah Khan <skhan@linuxfoundation.org>,
	Shuah Khan <shuah@kernel.org>
Cc: Alan Hayward <alan.hayward@arm.com>,
	Luis Machado <luis.machado@arm.com>,
	Salil Akerkar <Salil.Akerkar@arm.com>,
	Basant Kumar Dwivedi <Basant.KumarDwivedi@arm.com>,
	Szabolcs Nagy <szabolcs.nagy@arm.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-kselftest@vger.kernel.org, Mark Brown <broonie@kernel.org>
Subject: [PATCH v7 32/37] kselftest/arm64: sme: Provide streaming mode SVE stress test
Date: Fri, 10 Dec 2021 18:41:28 +0000	[thread overview]
Message-ID: <20211210184133.320748-33-broonie@kernel.org> (raw)
In-Reply-To: <20211210184133.320748-1-broonie@kernel.org>

One of the features of SME is the addition of streaming mode, in which we
have access to a set of streaming mode SVE registers at the SME vector
length. Since these are accessed using the SVE instructions let's reuse
the existing SVE stress test for testing with a compile time option for
controlling the few small differences needed:

 - Enter streaming mode immediately on starting the program.
 - In streaming mode FFR is removed so skip reading and writing FFR.

In order to avoid requiring a cutting edge toolchain with SME support
use the op/CR form for specifying SVCR.

Signed-off-by: Mark Brown <broonie@kernel.org>
---
 tools/testing/selftests/arm64/fp/.gitignore  |  1 +
 tools/testing/selftests/arm64/fp/Makefile    |  3 +
 tools/testing/selftests/arm64/fp/ssve-stress | 59 ++++++++++++++++++++
 tools/testing/selftests/arm64/fp/sve-test.S  | 30 ++++++++++
 4 files changed, 93 insertions(+)
 create mode 100644 tools/testing/selftests/arm64/fp/ssve-stress

diff --git a/tools/testing/selftests/arm64/fp/.gitignore b/tools/testing/selftests/arm64/fp/.gitignore
index 885dd592807b..73c600e1ab81 100644
--- a/tools/testing/selftests/arm64/fp/.gitignore
+++ b/tools/testing/selftests/arm64/fp/.gitignore
@@ -4,5 +4,6 @@ rdvl-sve
 sve-probe-vls
 sve-ptrace
 sve-test
+ssve-test
 vec-syscfg
 vlset
diff --git a/tools/testing/selftests/arm64/fp/Makefile b/tools/testing/selftests/arm64/fp/Makefile
index 11d4fc3b7115..6d9e4d1922e4 100644
--- a/tools/testing/selftests/arm64/fp/Makefile
+++ b/tools/testing/selftests/arm64/fp/Makefile
@@ -5,6 +5,7 @@ TEST_GEN_PROGS := sve-ptrace sve-probe-vls vec-syscfg
 TEST_PROGS_EXTENDED := fpsimd-test fpsimd-stress \
 	rdvl-sme rdvl-sve \
 	sve-test sve-stress \
+	ssve-test ssve-stress \
 	vlset
 
 all: $(TEST_GEN_PROGS) $(TEST_PROGS_EXTENDED)
@@ -17,6 +18,8 @@ sve-ptrace: sve-ptrace.o
 sve-probe-vls: sve-probe-vls.o rdvl.o
 sve-test: sve-test.o asm-utils.o
 	$(CC) -nostdlib $^ -o $@
+ssve-test: sve-test.S asm-utils.o
+	$(CC) -DSSVE -nostdlib $^ -o $@
 vec-syscfg: vec-syscfg.o rdvl.o
 vlset: vlset.o
 
diff --git a/tools/testing/selftests/arm64/fp/ssve-stress b/tools/testing/selftests/arm64/fp/ssve-stress
new file mode 100644
index 000000000000..e2bd2cc184ad
--- /dev/null
+++ b/tools/testing/selftests/arm64/fp/ssve-stress
@@ -0,0 +1,59 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0-only
+# Copyright (C) 2015-2019 ARM Limited.
+# Original author: Dave Martin <Dave.Martin@arm.com>
+
+set -ue
+
+NR_CPUS=`nproc`
+
+pids=
+logs=
+
+cleanup () {
+	trap - INT TERM CHLD
+	set +e
+
+	if [ -n "$pids" ]; then
+		kill $pids
+		wait $pids
+		pids=
+	fi
+
+	if [ -n "$logs" ]; then
+		cat $logs
+		rm $logs
+		logs=
+	fi
+}
+
+interrupt () {
+	cleanup
+	exit 0
+}
+
+child_died () {
+	cleanup
+	exit 1
+}
+
+trap interrupt INT TERM EXIT
+
+for x in `seq 0 $((NR_CPUS * 4))`; do
+	log=`mktemp`
+	logs=$logs\ $log
+	./ssve-test >$log &
+	pids=$pids\ $!
+done
+
+# Wait for all child processes to be created:
+sleep 10
+
+while :; do
+	kill -USR1 $pids
+done &
+pids=$pids\ $!
+
+wait
+
+exit 1
diff --git a/tools/testing/selftests/arm64/fp/sve-test.S b/tools/testing/selftests/arm64/fp/sve-test.S
index f5b1b48ffff2..31764e8370db 100644
--- a/tools/testing/selftests/arm64/fp/sve-test.S
+++ b/tools/testing/selftests/arm64/fp/sve-test.S
@@ -156,6 +156,7 @@ endfunction
 // We fill the upper lanes of FFR with zeros.
 // Beware: corrupts P0.
 function setup_ffr
+#ifndef SSVE
 	mov	x4, x30
 
 	and	w0, w0, #0x3
@@ -178,6 +179,9 @@ function setup_ffr
 	wrffr	p0.b
 
 	ret	x4
+#else
+	ret
+#endif
 endfunction
 
 // Trivial memory compare: compare x2 bytes starting at address x0 with
@@ -260,6 +264,7 @@ endfunction
 // Beware -- corrupts P0.
 // Clobbers x0-x5.
 function check_ffr
+#ifndef SSVE
 	mov	x3, x30
 
 	ldr	x4, =scratch
@@ -280,6 +285,9 @@ function check_ffr
 	mov	x2, x5
 	mov	x30, x3
 	b	memcmp
+#else
+	ret
+#endif
 endfunction
 
 // Any SVE register modified here can cause corruption in the main
@@ -295,13 +303,26 @@ function irritator_handler
 	movi	v0.8b, #1
 	movi	v9.16b, #2
 	movi	v31.8b, #3
+#ifndef SSVE
 	// And P0
 	rdffr	p0.b
 	// And FFR
 	wrffr	p15.b
+#endif
+
+	ret
+endfunction
+
+#ifdef SSVE
+function enable_sm
+	// Set SVCR.SM to 1, equivalent to SMSTART SM but doesn't need a
+	// SME capable toolchain.
+	mov	x0, #1
+	msr	S3_3_C4_C2_2, x0
 
 	ret
 endfunction
+#endif
 
 function terminate_handler
 	mov	w21, w0
@@ -359,6 +380,11 @@ endfunction
 .globl _start
 function _start
 _start:
+#ifdef SSVE
+	puts	"Streaming mode "
+	bl	enable_sm
+#endif
+
 	// Sanity-check and report the vector length
 
 	rdvl	x19, #8
@@ -407,6 +433,10 @@ _start:
 	orr	w2, w2, #SA_NODEFER
 	bl	setsignal
 
+#ifdef SSVE
+	bl	enable_sm	// syscalls will have exited streaming mode
+#endif
+
 	mov	x22, #0		// generation number, increments per iteration
 .Ltest_loop:
 	rdvl	x0, #8
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2021-12-10 19:13 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-10 18:40 [PATCH v7 00/37] arm64/sme: Initial support for the Scalable Matrix Extension Mark Brown
2021-12-10 18:40 ` [PATCH v7 01/37] arm64/sve: Make sysctl interface for SVE reusable by SME Mark Brown
2021-12-10 18:40 ` [PATCH v7 02/37] arm64/sve: Generalise vector length configuration prctl() for SME Mark Brown
2021-12-10 18:40 ` [PATCH v7 03/37] arm64/sve: Minor clarification of ABI documentation Mark Brown
2021-12-10 18:41 ` [PATCH v7 04/37] kselftest/arm64: Parameterise ptrace vector length information Mark Brown
2021-12-10 18:41 ` [PATCH v7 05/37] kselftest/arm64: Allow signal tests to trigger from a function Mark Brown
2021-12-10 18:41 ` [PATCH v7 06/37] kselftest/arm64: Add a test program to exercise the syscall ABI Mark Brown
2021-12-10 18:41 ` [PATCH v7 07/37] arm64: cpufeature: Always specify and use a field width for capabilities Mark Brown
2021-12-10 18:41 ` [PATCH v7 08/37] tools/nolibc: Implement gettid() Mark Brown
2021-12-10 18:41 ` [PATCH v7 09/37] arm64/sme: Provide ABI documentation for SME Mark Brown
2021-12-10 18:41 ` [PATCH v7 10/37] arm64/sme: System register and exception syndrome definitions Mark Brown
2021-12-10 18:41 ` [PATCH v7 11/37] arm64/sme: Define macros for manually encoding SME instructions Mark Brown
2021-12-10 18:41 ` [PATCH v7 12/37] arm64/sme: Early CPU setup for SME Mark Brown
2021-12-10 18:41 ` [PATCH v7 13/37] arm64/sme: Basic enumeration support Mark Brown
2021-12-10 18:41 ` [PATCH v7 14/37] arm64/sme: Identify supported SME vector lengths at boot Mark Brown
2021-12-10 18:41 ` [PATCH v7 15/37] arm64/sme: Implement sysctl to set the default vector length Mark Brown
2021-12-10 18:41 ` [PATCH v7 16/37] arm64/sme: Implement vector length configuration prctl()s Mark Brown
2021-12-10 18:41 ` [PATCH v7 17/37] arm64/sme: Implement support for TPIDR2 Mark Brown
2021-12-10 18:41 ` [PATCH v7 18/37] arm64/sme: Implement SVCR context switching Mark Brown
2021-12-10 18:41 ` [PATCH v7 19/37] arm64/sme: Implement streaming SVE " Mark Brown
2021-12-10 18:41 ` [PATCH v7 20/37] arm64/sme: Implement ZA " Mark Brown
2021-12-10 18:41 ` [PATCH v7 21/37] arm64/sme: Implement traps and syscall handling for SME Mark Brown
2021-12-10 18:41 ` [PATCH v7 22/37] arm64/sme: Implement streaming SVE signal handling Mark Brown
2021-12-10 18:41 ` [PATCH v7 23/37] arm64/sme: Implement ZA " Mark Brown
2021-12-10 18:41 ` [PATCH v7 24/37] arm64/sme: Implement ptrace support for streaming mode SVE registers Mark Brown
2021-12-10 18:41 ` [PATCH v7 25/37] arm64/sme: Add ptrace support for ZA Mark Brown
2021-12-10 18:41 ` [PATCH v7 26/37] arm64/sme: Disable streaming mode and ZA when flushing CPU state Mark Brown
2021-12-10 18:41 ` [PATCH v7 27/37] arm64/sme: Save and restore streaming mode over EFI runtime calls Mark Brown
2021-12-10 18:41 ` [PATCH v7 28/37] arm64/sme: Provide Kconfig for SME Mark Brown
2021-12-10 18:41 ` [PATCH v7 29/37] kselftest/arm64: sme: Add streaming SME support to vlset Mark Brown
2021-12-10 18:41 ` [PATCH v7 30/37] kselftest/arm64: Add tests for TPIDR2 Mark Brown
2021-12-10 18:41 ` [PATCH v7 31/37] kselftest/arm64: Extend vector configuration API tests to cover SME Mark Brown
2021-12-10 18:41 ` Mark Brown [this message]
2021-12-10 18:41 ` [PATCH v7 33/37] kselftest/arm64: Add stress test for SME ZA context switching Mark Brown
2021-12-10 18:41 ` [PATCH v7 34/37] kselftest/arm64: signal: Add SME signal handling tests Mark Brown
2021-12-10 18:41 ` [PATCH v7 35/37] kselftest/arm64: Add streaming SVE to SVE ptrace tests Mark Brown
2021-12-10 18:41 ` [PATCH v7 36/37] kselftest/arm64: Add coverage for the ZA ptrace interface Mark Brown
2021-12-10 18:41 ` [PATCH v7 37/37] kselftest/arm64: Add SME support to syscall ABI test Mark Brown
2021-12-14 19:17 ` (subset) [PATCH v7 00/37] arm64/sme: Initial support for the Scalable Matrix Extension Catalin Marinas
2021-12-14 19:18   ` Catalin Marinas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211210184133.320748-33-broonie@kernel.org \
    --to=broonie@kernel.org \
    --cc=Basant.KumarDwivedi@arm.com \
    --cc=Salil.Akerkar@arm.com \
    --cc=alan.hayward@arm.com \
    --cc=catalin.marinas@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kselftest@vger.kernel.org \
    --cc=luis.machado@arm.com \
    --cc=shuah@kernel.org \
    --cc=skhan@linuxfoundation.org \
    --cc=szabolcs.nagy@arm.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).