Re: [PATCH v2] media: aspeed: move err-handling together to the bottom

From: Mauro Carvalho Chehab <mchehab@kernel.org>
To: Jammy Huang <jammy_huang@aspeedtech.com>
Cc: <hverkuil-cisco@xs4all.nl>, <sakari.ailus@linux.intel.com>,
	<gregkh@linuxfoundation.org>, <laurent.pinchart@ideasonboard.com>,
	<eajames@linux.ibm.com>, <joel@jms.id.au>, <andrew@aj.id.au>,
	<linux-media@vger.kernel.org>, <openbmc@lists.ozlabs.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-aspeed@lists.ozlabs.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2] media: aspeed: move err-handling together to the bottom
Date: Tue, 14 Dec 2021 15:53:00 +0100	[thread overview]
Message-ID: <20211214155300.0132946e@coco.lan> (raw)
In-Reply-To: <20211206004811.1118-1-jammy_huang@aspeedtech.com>

Em Mon, 6 Dec 2021 08:48:11 +0800
Jammy Huang <jammy_huang@aspeedtech.com> escreveu:

> refine aspeed_video_setup_video() flow.

Why? It makes no difference where the error handling code is. Let's
keep it as preferred by the driver's author ;-)

Regards,
Mauro

> 
> Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
> ---
> v2:
>  - remove change-id in comment
> ---
>  drivers/media/platform/aspeed-video.c | 24 +++++++++++-------------
>  1 file changed, 11 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
> index fea5e4d0927e..f5c40d6b4ece 100644
> --- a/drivers/media/platform/aspeed-video.c
> +++ b/drivers/media/platform/aspeed-video.c
> @@ -1641,11 +1641,8 @@ static int aspeed_video_setup_video(struct aspeed_video *video)
>  
>  	rc = video->ctrl_handler.error;
>  	if (rc) {
> -		v4l2_ctrl_handler_free(&video->ctrl_handler);
> -		v4l2_device_unregister(v4l2_dev);
> -
>  		dev_err(video->dev, "Failed to init controls: %d\n", rc);
> -		return rc;
> +		goto err_ctrl_init;
>  	}
>  
>  	v4l2_dev->ctrl_handler = &video->ctrl_handler;
> @@ -1663,11 +1660,8 @@ static int aspeed_video_setup_video(struct aspeed_video *video)
>  
>  	rc = vb2_queue_init(vbq);
>  	if (rc) {
> -		v4l2_ctrl_handler_free(&video->ctrl_handler);
> -		v4l2_device_unregister(v4l2_dev);
> -
>  		dev_err(video->dev, "Failed to init vb2 queue\n");
> -		return rc;
> +		goto err_vb2_init;
>  	}
>  
>  	vdev->queue = vbq;
> @@ -1685,15 +1679,19 @@ static int aspeed_video_setup_video(struct aspeed_video *video)
>  	video_set_drvdata(vdev, video);
>  	rc = video_register_device(vdev, VFL_TYPE_GRABBER, 0);
>  	if (rc) {
> -		vb2_queue_release(vbq);
> -		v4l2_ctrl_handler_free(&video->ctrl_handler);
> -		v4l2_device_unregister(v4l2_dev);
> -
>  		dev_err(video->dev, "Failed to register video device\n");
> -		return rc;
> +		goto err_video_reg;
>  	}
>  
>  	return 0;
> +
> +err_video_reg:
> +	vb2_queue_release(vbq);
> +err_vb2_init:
> +err_ctrl_init:
> +	v4l2_ctrl_handler_free(&video->ctrl_handler);
> +	v4l2_device_unregister(v4l2_dev);
> +	return rc;
>  }
>  
>  static int aspeed_video_init(struct aspeed_video *video)

Thanks,
Mauro

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel