* [GIT PULL 2/6] i.MX SoC update for 5.17
2021-12-18 7:14 [GIT PULL 1/6] i.MX drivers update for 5.17 Shawn Guo
@ 2021-12-18 7:14 ` Shawn Guo
2021-12-18 7:14 ` [GIT PULL 3/6] i.MX dt-bindings " Shawn Guo
` (4 subsequent siblings)
5 siblings, 0 replies; 9+ messages in thread
From: Shawn Guo @ 2021-12-18 7:14 UTC (permalink / raw)
To: soc, arm
Cc: Shawn Guo, Fabio Estevam, Stefan Agner, Li Yang, kernel,
linux-imx, linux-arm-kernel
The following changes since commit fa55b7dcdc43c1aa1ba12bca9d2dd4318c2a0dbf:
Linux 5.16-rc1 (2021-11-14 13:56:52 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-soc-5.17
for you to fetch changes up to b0100bce4ff82ec1ccd3c1f3d339fd2df6a81784:
ARM: imx: rename DEBUG_IMX21_IMX27_UART to DEBUG_IMX27_UART (2021-11-21 16:45:16 +0800)
----------------------------------------------------------------
i.MX SoC update for 5.17:
- A couple of cleanups from Lukas Bulwahn to remove left-over from
i.MX{27,31,35} board file removal, and rename DEBUG_IMX21_IMX27_UART
to DEBUG_IMX27_UART.
----------------------------------------------------------------
Lukas Bulwahn (2):
ARM: imx: remove dead left-over from i.MX{27,31,35} removal
ARM: imx: rename DEBUG_IMX21_IMX27_UART to DEBUG_IMX27_UART
arch/arm/Kconfig.debug | 14 +++++++-------
arch/arm/include/debug/imx-uart.h | 18 +++++++++---------
arch/arm/mach-imx/Kconfig | 12 ------------
arch/arm/mach-imx/Makefile | 2 --
4 files changed, 16 insertions(+), 30 deletions(-)
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 9+ messages in thread* [GIT PULL 3/6] i.MX dt-bindings update for 5.17
2021-12-18 7:14 [GIT PULL 1/6] i.MX drivers update for 5.17 Shawn Guo
2021-12-18 7:14 ` [GIT PULL 2/6] i.MX SoC " Shawn Guo
@ 2021-12-18 7:14 ` Shawn Guo
2021-12-18 7:14 ` [GIT PULL 4/6] i.MX arm device tree change " Shawn Guo
` (3 subsequent siblings)
5 siblings, 0 replies; 9+ messages in thread
From: Shawn Guo @ 2021-12-18 7:14 UTC (permalink / raw)
To: soc, arm
Cc: Shawn Guo, Fabio Estevam, Stefan Agner, Li Yang, kernel,
linux-imx, linux-arm-kernel
The following changes since commit fa55b7dcdc43c1aa1ba12bca9d2dd4318c2a0dbf:
Linux 5.16-rc1 (2021-11-14 13:56:52 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-bindings-5.17
for you to fetch changes up to e1e06edd94d5b3171401a1435a17251102cc8494:
dt-bindings: soc: add binding for i.MX8MN DISP blk-ctrl (2021-12-17 10:54:26 +0800)
----------------------------------------------------------------
i.MX dt-bindings update for 5.17:
- New bindings for i.MX SPBA bus and i.MX8MN DISP blk-ctrl.
- New vendor prefix for BSH Hausgeraete GmbH and JOZ BV.
- New compatibles for various i.MX6 and i.MX8 boards.
- Add optional 'fsl,continuous-burst-clk' property support for imx-weim
binding.
----------------------------------------------------------------
Adam Ford (2):
dt-bindings: soc: imx: Add binding doc for spba bus
dt-bindings: soc: add binding for i.MX8MN DISP blk-ctrl
Alexander Stein (3):
dt-bindings: arm: fsl: add TQMa8MxML boards
dt-bindings: arm: fsl: add TQMa8MxNL boards
dt-bindings: arm: fsl: add TQMa8Mx boards
Ariel D'Alessandro (3):
dt-bindings: Add vendor prefix for BSH Hausgeraete GmbH
dt-bindings: arm: fsl: Add iMX8MN BSH SMM S2 boards
dt-bindings: arm: fsl: Add BSH SMM-M2 IMX6ULZ SystemMaster board
Ivan Bornyakov (1):
dt-bindings: bus: imx-weim: add words about continuous bclk
Jacky Bai (1):
dt-bindings: arm: fsl: Add binding for imx8ulp evk
Matthias Schiffer (1):
dt-bindings: arm: fsl: add TQ-Systems boards based on i.MX6Q/QP/DL
Michal Vokáč (1):
dt-bindings: arm: fsl: Add Y Soft IOTA Crux/Crux+ boards
Oleksij Rempel (2):
dt-bindings: vendor-prefixes: Add an entry for JOZ BV
dt-bindings: arm: fsl: add JOZ Access Point
Documentation/devicetree/bindings/arm/fsl.yaml | 78 +++++++++++++++++
.../devicetree/bindings/bus/fsl,spba-bus.yaml | 68 +++++++++++++++
Documentation/devicetree/bindings/bus/imx-weim.txt | 5 ++
.../bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml | 97 ++++++++++++++++++++++
.../devicetree/bindings/vendor-prefixes.yaml | 4 +
5 files changed, 252 insertions(+)
create mode 100644 Documentation/devicetree/bindings/bus/fsl,spba-bus.yaml
create mode 100644 Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 9+ messages in thread* [GIT PULL 4/6] i.MX arm device tree change for 5.17
2021-12-18 7:14 [GIT PULL 1/6] i.MX drivers update for 5.17 Shawn Guo
2021-12-18 7:14 ` [GIT PULL 2/6] i.MX SoC " Shawn Guo
2021-12-18 7:14 ` [GIT PULL 3/6] i.MX dt-bindings " Shawn Guo
@ 2021-12-18 7:14 ` Shawn Guo
2021-12-18 7:14 ` [GIT PULL 5/6] i.MX arm64 " Shawn Guo
` (2 subsequent siblings)
5 siblings, 0 replies; 9+ messages in thread
From: Shawn Guo @ 2021-12-18 7:14 UTC (permalink / raw)
To: soc, arm
Cc: Shawn Guo, Fabio Estevam, Stefan Agner, Li Yang, kernel,
linux-imx, linux-arm-kernel
The following changes since commit fa55b7dcdc43c1aa1ba12bca9d2dd4318c2a0dbf:
Linux 5.16-rc1 (2021-11-14 13:56:52 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt-5.17
for you to fetch changes up to 3951cc6bae4cd252a2efec5bad5d30265d525e0f:
ARM: dts: imx6: phytec: Add PEB-WLBT-05 support (2021-12-17 10:43:55 +0800)
----------------------------------------------------------------
i.MX arm device tree change for 5.17:
- New board support: TQ-Systems MBa6x, Y Soft IOTA Crux/Crux+ board,
JOZ Access Point, Phytec PEB-WLBT-05 support, BSH SMM-M2 IMX6ULZ
SystemMaster.
- Update SPBA bus node name to match binding schema.
- A series from Christoph Niedermaier to update imx6qdl-dhcom board
around Ethernet and USB support.
- A series from Giulio Benetti to clean up undocumented/unused fixed
clock compatibles.
- A series from Laurent Pinchart to update i.MX7 MIPI_CSI support.
- A couple of changes from Russell to update phy-mode for
vf610-zii-dev-rev-b board.
- Add Wacom digitizer support for imx7d-remarkable2 device.
----------------------------------------------------------------
Adam Ford (1):
ARM: dts: imx: Change spba to spba-bus
Alistair Francis (1):
ARM: dts: imx7d-remarkable2: add wacom digitizer device
Christoph Niedermaier (3):
ARM: dts: imx6qdl-dhcom: Align PHY reset timing with other DHCOM SoMs
ARM: dts: imx6qdl-dhcom: Identify the PHY by ethernet-phy-id0007.c0f0
ARM: dts: imx6qdl-dhcom: Add USB overcurrent pin on SoM layer
Giulio Benetti (17):
ARM: dts: imx1: drop "fsl,imx-clk32"
ARM: dts: imx25: drop "fsl,imx-osc"
ARM: dts: imx50: drop "fsl,imx-osc"
ARM: dts: imx50: drop "fsl,imx-ckil"
ARM: dts: imx50: drop "fsl,imx-ckih1"
ARM: dts: imx50: drop "fsl,imx-ckih2"
ARM: dts: imx51: drop "fsl,imx-osc"
ARM: dts: imx51: drop "fsl,imx-ckil"
ARM: dts: imx51: drop "fsl,imx-ckih1"
ARM: dts: imx51: drop "fsl,imx-ckih2"
ARM: dts: imx53: drop "fsl,imx-osc"
ARM: dts: imx53: drop "fsl,imx-ckil"
ARM: dts: imx53: drop "fsl,imx-ckih1"
ARM: dts: imx53: drop "fsl,imx-ckih2"
ARM: dts: imx6qdl: drop "fsl,imx-osc"
ARM: dts: imx6qdl: drop "fsl,imx-ckil"
ARM: dts: imx6qdl: drop "fsl,imx-ckih1"
Jason Wang (1):
ARM: dts: imx: Fix typo in pinfunc comments
Laurent Pinchart (3):
ARM: dts: imx7s-warp: Drop undefined property in mipi_csi node
ARM: dts: imx7: Drop reset-names property for mipi_csi node
ARM: dts: imx7: Group mipi_csi 'port' children in a 'ports' node
Markus Niebel (1):
ARM: dts: imx6qdl: add TQ-Systems MBa6x device trees
Matthias Schiffer (1):
ARM: dts: imx6qdl-tqma6: add ERR006687 hardware workaround for "a" variant
Michael Trimarchi (1):
ARM: dts: imx6ulz-bsh-smm-m2: Add BSH SMM-M2 IMX6ULZ SystemMaster
Michal Vokáč (1):
ARM: dts: imx6dl-yapp4: Add Y Soft IOTA Crux/Crux+ board
Oleksij Rempel (1):
ARM: dts: add JOZ Access Point
Russell King (Oracle) (2):
ARM: dts: vf610-zii-dev-rev-b: correct phy-mode for 6185 dsa link
ARM: dts: vf610-zii-dev-rev-b: specify phy-mode for external PHYs
Yunus Bas (3):
ARM: dts: imx6qdl: phytec: Add support for optional PEB-EVAL-01 board
ARM: dts: imx6qdl: phytec: Add support for optional PEB-AV-02 LCD adapter
ARM: dts: imx6: phytec: Add PEB-WLBT-05 support
arch/arm/boot/dts/Makefile | 11 +-
arch/arm/boot/dts/imx1-pinfunc.h | 6 +-
arch/arm/boot/dts/imx1.dtsi | 2 +-
arch/arm/boot/dts/imx25.dtsi | 4 +-
arch/arm/boot/dts/imx27-pinfunc.h | 6 +-
arch/arm/boot/dts/imx31.dtsi | 2 +-
arch/arm/boot/dts/imx50.dtsi | 10 +-
arch/arm/boot/dts/imx51.dtsi | 10 +-
arch/arm/boot/dts/imx53.dtsi | 10 +-
arch/arm/boot/dts/imx6dl-mba6.dtsi | 22 +
arch/arm/boot/dts/imx6dl-mba6a.dts | 21 +
arch/arm/boot/dts/imx6dl-mba6b.dts | 21 +
arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts | 3 +
arch/arm/boot/dts/imx6q-mba6.dtsi | 44 ++
arch/arm/boot/dts/imx6q-mba6a.dts | 20 +
arch/arm/boot/dts/imx6q-mba6b.dts | 20 +
arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts | 3 +
arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts | 3 +
arch/arm/boot/dts/imx6q-yapp4-crux.dts | 54 +++
arch/arm/boot/dts/imx6qdl-dhcom-drc02.dtsi | 4 +
arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi | 4 +
arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi | 8 +-
arch/arm/boot/dts/imx6qdl-mba6.dtsi | 526 +++++++++++++++++++++
arch/arm/boot/dts/imx6qdl-mba6a.dtsi | 36 ++
arch/arm/boot/dts/imx6qdl-mba6b.dtsi | 52 ++
.../boot/dts/imx6qdl-phytec-mira-peb-av-02.dtsi | 119 +++++
.../boot/dts/imx6qdl-phytec-mira-peb-eval-01.dtsi | 71 +++
.../boot/dts/imx6qdl-phytec-mira-peb-wlbt-05.dtsi | 85 ++++
arch/arm/boot/dts/imx6qdl-tqma6a.dtsi | 20 +
arch/arm/boot/dts/imx6qdl.dtsi | 8 +-
arch/arm/boot/dts/imx6qp-mba6b.dts | 18 +
arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts | 3 +
arch/arm/boot/dts/imx6qp-yapp4-crux-plus.dts | 54 +++
.../boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts | 1 +
.../boot/dts/imx6ul-phytec-segin-peb-wlbt-05.dtsi | 90 ++++
arch/arm/boot/dts/imx6ull-jozacp.dts | 456 ++++++++++++++++++
.../boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts | 1 +
.../boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts | 1 +
.../boot/dts/imx6ull-phytec-segin-peb-wlbt-05.dtsi | 19 +
arch/arm/boot/dts/imx6ulz-bsh-smm-m2.dts | 146 ++++++
arch/arm/boot/dts/imx7d-remarkable2.dts | 59 +++
arch/arm/boot/dts/imx7s-warp.dts | 14 +-
arch/arm/boot/dts/imx7s.dtsi | 22 +-
arch/arm/boot/dts/vf610-zii-dev-rev-b.dts | 6 +-
44 files changed, 2043 insertions(+), 52 deletions(-)
create mode 100644 arch/arm/boot/dts/imx6dl-mba6.dtsi
create mode 100644 arch/arm/boot/dts/imx6dl-mba6a.dts
create mode 100644 arch/arm/boot/dts/imx6dl-mba6b.dts
create mode 100644 arch/arm/boot/dts/imx6q-mba6.dtsi
create mode 100644 arch/arm/boot/dts/imx6q-mba6a.dts
create mode 100644 arch/arm/boot/dts/imx6q-mba6b.dts
create mode 100644 arch/arm/boot/dts/imx6q-yapp4-crux.dts
create mode 100644 arch/arm/boot/dts/imx6qdl-mba6.dtsi
create mode 100644 arch/arm/boot/dts/imx6qdl-mba6a.dtsi
create mode 100644 arch/arm/boot/dts/imx6qdl-mba6b.dtsi
create mode 100644 arch/arm/boot/dts/imx6qdl-phytec-mira-peb-av-02.dtsi
create mode 100644 arch/arm/boot/dts/imx6qdl-phytec-mira-peb-eval-01.dtsi
create mode 100644 arch/arm/boot/dts/imx6qdl-phytec-mira-peb-wlbt-05.dtsi
create mode 100644 arch/arm/boot/dts/imx6qp-mba6b.dts
create mode 100644 arch/arm/boot/dts/imx6qp-yapp4-crux-plus.dts
create mode 100644 arch/arm/boot/dts/imx6ul-phytec-segin-peb-wlbt-05.dtsi
create mode 100644 arch/arm/boot/dts/imx6ull-jozacp.dts
create mode 100644 arch/arm/boot/dts/imx6ull-phytec-segin-peb-wlbt-05.dtsi
create mode 100644 arch/arm/boot/dts/imx6ulz-bsh-smm-m2.dts
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 9+ messages in thread* [GIT PULL 5/6] i.MX arm64 device tree change for 5.17
2021-12-18 7:14 [GIT PULL 1/6] i.MX drivers update for 5.17 Shawn Guo
` (2 preceding siblings ...)
2021-12-18 7:14 ` [GIT PULL 4/6] i.MX arm device tree change " Shawn Guo
@ 2021-12-18 7:14 ` Shawn Guo
2021-12-18 7:14 ` [GIT PULL 6/6] i.MX defconfig update " Shawn Guo
2021-12-20 16:28 ` [GIT PULL 1/6] i.MX drivers " Arnd Bergmann
5 siblings, 0 replies; 9+ messages in thread
From: Shawn Guo @ 2021-12-18 7:14 UTC (permalink / raw)
To: soc, arm
Cc: Shawn Guo, Fabio Estevam, Stefan Agner, Li Yang, kernel,
linux-imx, linux-arm-kernel
The following changes since commit fa55b7dcdc43c1aa1ba12bca9d2dd4318c2a0dbf:
Linux 5.16-rc1 (2021-11-14 13:56:52 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt64-5.17
for you to fetch changes up to 0bc3e333a0c82ee8691bcfdf441644ce02bd8be0:
arm64: dts: imx8mp-evk: configure multiple queues on eqos (2021-12-16 18:14:25 +0800)
----------------------------------------------------------------
i.MX arm64 device tree change for 5.17:
- New SoC support: i.MX8 ULP.
- New board support: i.MX8MM/MN based TQMa8Mx boards, iMX8MN BSH SMM S2,
i.MX8 ULP EVK.
- A series from Adam Ford to enable Camera and USB support for
imx8mm-beacon device.
- Add overlays for various serdes protocols on LS1028A QDS board using
different PHY cards.
- A series from Biwen Li to update LS1028A devices around RTC, flextimer
and PWM support.
- A series from Joakim Zhang to update ENET/FEC suppport on i.MX8M
devices.
- A couple of changes from Lucas Stach to update nitrogen8-som Ethernet
PHY and I2C1 pad configuration.
- A series from Martin Kepplinger to split out a shared imx8mq-librem5-r3
dtsi for Librem5 devices.
- Add cache descriptions for i.MX8 SoCs.
- A series from Vladimir Oltean to update ls1028a-rdb device tree in
order to share the DTS between Linux and U-Boot.
- Random device addtion to various i.MX8 and LX2160A based devices.
----------------------------------------------------------------
Adam Ford (4):
arm64: dts: imx8mm-beacon: Enable USB Controllers
arm64: dts: imx8mm: Add CSI nodes
arm64: dts: imx8mm-beacon: Enable OV5640 Camera
arm64: dts: imx8mq-evk: link regulator to VPU domain
Alex Marginean (1):
arm64: dts: ls1028a-qds: add overlays for various serdes protocols
Alexander Stein (3):
arm64: dts: freescale: add initial device tree for TQMa8MQML with i.MX8MM
arm64: dts: freescale: add initial device tree for TQMa8MQNL with i.MX8MN
arm64: dts: freescale: add initial device tree for TQMa8Mx with i.MX8M
Ariel D'Alessandro (1):
arm64: dts: imx8mn-bsh-smm-s2/pro: Add iMX8MN BSH SMM S2 boards
Arnaud Ferraris (1):
arm64: dts: freescale: add 'chassis-type' property
Biwen Li (5):
arm64: dts: lx2162a-qds: add interrupt line for RTC node
arm64: dts: ls1028a: add ftm_alarm1 node to be used as wakeup source
arm64: dts: ls1028a: add flextimer based pwm nodes
arm64: dts: ls1028a-rdb: enable pwm0
arm64: dts: ls1028a-qds: move rtc node to the correct i2c bus
David Heidelberg (1):
arm64: dts: imx8mq: fix the schema check errors for fsl,tmu-calibration
Fabio Estevam (1):
arm64: dts: imx8mm/n: Remove the 'pm-ignore-notify' property
Geert Uytterhoeven (1):
arm64: dts: imx: imx8mn-beacon: Drop undocumented clock-names reference
Ioana Radulescu (1):
arm64: dts: lx2160a-rdb: Add Inphi PHY node
Jacky Bai (2):
arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp
arm64: dts: imx8ulp: Add the basic dts for imx8ulp evk board
Joakim Zhang (7):
arm64: dts: imx8mn-evk: add hardware reset for FEC PHY
arm64: dts: imx8mp-evk: add hardware reset for EQOS PHY
arm64: dts: imx8m: disable smart eee for FEC PHY
arm64: dts: imx8m: configure FEC PHY VDDIO voltage
arm64: dts: imx8mp-evk: disable CLKOUT clock for ENET PHY
arm64: dts: imx8m: remove unused "nvmem_macaddr_swap" property for FEC
arm64: dts: imx8mp: add mac address for EQOS
Kuldeep Singh (1):
arm64: dts: lx2162a: Add CAN nodes for LX2162A-QDS
Li Yang (2):
arm64: dts: ls1088a: Add reboot nodes
arm64: dts: ls1088a: add snps incr burst type adjustment for usb1
Lucas Stach (3):
arm64: dts: nitrogen8-som: correct network PHY reset
arm64: dts: nitrogen8-som: correct i2c1 pad-ctrl
arm64: dts: imx8mm: don't assign PLL2 in SoC dtsi
Martin Kepplinger (4):
arm64: dts: split out a shared imx8mq-librem5-r3.dtsi description
arm64: dts: imx8mq-librem5: describe power supply for cameras
arm64: dts: imx8mq-librem5: describe the selfie cam
arm64: dts: imx8mq-librem5-r3.dtsi: describe selfie cam XSHUTDOWN pin
Meng Li (1):
arm64: dts: fsl-ls1043a-rdb: add delay between CS and CLK signal for flash device
Pankaj Bansal (1):
arm64: dts: lx2160a-qds: Add mdio mux nodes
Pankaj Gupta (1):
arm64: dts: lx2160a: add optee-tz node
Peng Fan (6):
arm64: dts: imx8m: add cache info
arm64: dts: imx8qm: add cache info
arm64: dts: imx8qxp: add cache info
dt-bindings: power: imx8ulp: add power domain header file
arm64: dts: imx8ulp: add scmi firmware node
arm64: dts: imx8ulp: add power domain entry for usdhc
Ran Wang (1):
arm64: dts: lx2160a: enable usb3-lpm-capable for usb3 nodes
Vabhav Sharma (1):
arm64: dts: ls1028a-qds: enable lpuart1
Vladimir Oltean (4):
arm64: dts: ls1028a-rdb: sort nodes alphabetically by label
arm64: dts: ls1028a-rdb: add an alias for the FlexSPI controller
arm64: dts: ls1028a-rdb: add aliases for the Ethernet ports
arm64: dts: ls1028a-rdb: update copyright
Xiaoliang Yang (1):
arm64: dts: imx8mp-evk: configure multiple queues on eqos
Xiaowei Bao (1):
arm64: dts: ls1028a: Add PCIe EP nodes
Yangbo Lu (1):
arm64: dts: lx2162a-qds: support SD UHS-I and eMMC HS400 modes
arch/arm64/boot/dts/freescale/Makefile | 22 +
.../boot/dts/freescale/fsl-ls1028a-qds-13bb.dts | 113 +++
.../boot/dts/freescale/fsl-ls1028a-qds-65bb.dts | 108 +++
.../boot/dts/freescale/fsl-ls1028a-qds-7777.dts | 82 ++
.../boot/dts/freescale/fsl-ls1028a-qds-85bb.dts | 107 +++
.../boot/dts/freescale/fsl-ls1028a-qds-899b.dts | 75 ++
.../boot/dts/freescale/fsl-ls1028a-qds-9999.dts | 79 ++
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 39 +-
arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 103 ++-
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 130 ++-
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts | 2 +
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 13 +
arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts | 149 ++++
arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 21 +
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 10 +
arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts | 21 +
.../dts/freescale/imx8mm-beacon-baseboard.dtsi | 93 ++
.../boot/dts/freescale/imx8mm-beacon-som.dtsi | 1 -
arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi | 7 +
.../dts/freescale/imx8mm-icore-mx8mm-ctouch2.dts | 1 -
.../dts/freescale/imx8mm-icore-mx8mm-edimm2.2.dts | 1 -
.../boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts | 253 ++++++
.../arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi | 335 +++++++
arch/arm64/boot/dts/freescale/imx8mm.dtsi | 86 +-
.../dts/freescale/imx8mn-beacon-baseboard.dtsi | 1 -
.../boot/dts/freescale/imx8mn-beacon-som.dtsi | 1 -
.../dts/freescale/imx8mn-bsh-smm-s2-common.dtsi | 426 +++++++++
.../arm64/boot/dts/freescale/imx8mn-bsh-smm-s2.dts | 48 +
.../boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts | 80 ++
arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi | 9 +
.../boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts | 237 +++++
.../arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi | 322 +++++++
arch/arm64/boot/dts/freescale/imx8mn.dtsi | 29 +-
arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 73 ++
arch/arm64/boot/dts/freescale/imx8mp.dtsi | 35 +-
arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 9 +
.../arm64/boot/dts/freescale/imx8mq-librem5-r3.dts | 25 +-
.../boot/dts/freescale/imx8mq-librem5-r3.dtsi | 45 +
.../arm64/boot/dts/freescale/imx8mq-librem5-r4.dts | 16 +-
arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 97 +-
.../boot/dts/freescale/imx8mq-mnt-reform2.dts | 1 +
.../boot/dts/freescale/imx8mq-nitrogen-som.dtsi | 15 +-
.../boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts | 349 ++++++++
arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi | 360 ++++++++
arch/arm64/boot/dts/freescale/imx8mq.dtsi | 115 ++-
arch/arm64/boot/dts/freescale/imx8qm.dtsi | 38 +
arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 28 +
arch/arm64/boot/dts/freescale/imx8ulp-evk.dts | 64 ++
arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h | 978 +++++++++++++++++++++
arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 434 +++++++++
arch/arm64/boot/dts/freescale/mba8mx.dtsi | 282 ++++++
include/dt-bindings/power/imx8ulp-power.h | 26 +
52 files changed, 5840 insertions(+), 154 deletions(-)
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
create mode 100755 arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h
create mode 100644 arch/arm64/boot/dts/freescale/imx8ulp.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/mba8mx.dtsi
create mode 100644 include/dt-bindings/power/imx8ulp-power.h
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 9+ messages in thread* [GIT PULL 6/6] i.MX defconfig update for 5.17
2021-12-18 7:14 [GIT PULL 1/6] i.MX drivers update for 5.17 Shawn Guo
` (3 preceding siblings ...)
2021-12-18 7:14 ` [GIT PULL 5/6] i.MX arm64 " Shawn Guo
@ 2021-12-18 7:14 ` Shawn Guo
2021-12-20 16:28 ` [GIT PULL 1/6] i.MX drivers " Arnd Bergmann
5 siblings, 0 replies; 9+ messages in thread
From: Shawn Guo @ 2021-12-18 7:14 UTC (permalink / raw)
To: soc, arm
Cc: Shawn Guo, Fabio Estevam, Stefan Agner, Li Yang, kernel,
linux-imx, linux-arm-kernel
The following changes since commit fa55b7dcdc43c1aa1ba12bca9d2dd4318c2a0dbf:
Linux 5.16-rc1 (2021-11-14 13:56:52 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-defconfig-5.17
for you to fetch changes up to c720e38f4c2dd1e0b5cf4f7dcf8bb6951cd3856d:
ARM: imx_v6_v7_defconfig: Enable for DHCOM devices required RTC_DRV_RV3029C2 (2021-12-16 14:50:25 +0800)
----------------------------------------------------------------
i.MX defconfig update for 5.17:
- Enable pinctrl and clock drivers for i.MX8 ULP SoC.
- A couple of patches from Adam Ford to enable Camera driver support
for Beacon EmbeddedWorks i.MX8MM development kit.
- Enable drivers for devices found on TQMa8MxML-MBa8Mx board.
- Enable RTC_DRV_RV3029C2 driver support for DHCOM devices.
----------------------------------------------------------------
Adam Ford (2):
arm64: defconfig: Enable VIDEO_IMX_MEDIA
arm64: defconfig: Enable OV5640
Alexander Stein (1):
arm64: defconfig: enable drivers for TQ TQMa8MxML-MBa8Mx
Johann Neuhauser (1):
ARM: imx_v6_v7_defconfig: Enable for DHCOM devices required RTC_DRV_RV3029C2
Peng Fan (1):
arm64: defconfig: enable drivers for booting i.MX8ULP
arch/arm/configs/imx_v6_v7_defconfig | 1 +
arch/arm64/configs/defconfig | 11 +++++++++++
2 files changed, 12 insertions(+)
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [GIT PULL 1/6] i.MX drivers update for 5.17
2021-12-18 7:14 [GIT PULL 1/6] i.MX drivers update for 5.17 Shawn Guo
` (4 preceding siblings ...)
2021-12-18 7:14 ` [GIT PULL 6/6] i.MX defconfig update " Shawn Guo
@ 2021-12-20 16:28 ` Arnd Bergmann
2021-12-21 6:57 ` Shawn Guo
5 siblings, 1 reply; 9+ messages in thread
From: Arnd Bergmann @ 2021-12-20 16:28 UTC (permalink / raw)
To: Shawn Guo
Cc: SoC Team, arm-soc, Fabio Estevam, Stefan Agner, Li Yang,
Sascha Hauer, NXP Linux Team, Linux ARM
On Sat, Dec 18, 2021 at 8:14 AM Shawn Guo <shawnguo@kernel.org> wrote:
>
> The following changes since commit fa55b7dcdc43c1aa1ba12bca9d2dd4318c2a0dbf:
>
> Linux 5.16-rc1 (2021-11-14 13:56:52 -0800)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-drivers-5.17
>
> for you to fetch changes up to 7f511d514e8c34b6dd0c17b5496e48b2a6a2626c:
>
> soc: imx: imx8m-blk-ctrl: add i.MX8MN DISP blk-ctrl (2021-12-17 10:53:20 +0800)
>
> ----------------------------------------------------------------
> i.MX drivers update for 5.17:
>
> - A number of patches from Adam Ford to update gpcv2 and blk-ctrl driver
> to keep i.MX8MM VPU-H1 and i.MX8MN GPUMIX bus clocks active, and add
> i.MX8MN display related domain support.
> - Add optional continuous burst clock support for imx-weim bus driver.
> - Call pm_runtime_put_sync_suspend() instead of pm_runtime_put() in
> gpcv2 driver to prevent a sequence issue seen with i.MX8MM GPU and
> MIX domain.
Thanks, I've pulled all six tags now, but I don't know why there are no
automated emails about them, this seems to happen for some senders
but not others.
Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [GIT PULL 1/6] i.MX drivers update for 5.17
2021-12-20 16:28 ` [GIT PULL 1/6] i.MX drivers " Arnd Bergmann
@ 2021-12-21 6:57 ` Shawn Guo
2021-12-23 15:04 ` Arnd Bergmann
0 siblings, 1 reply; 9+ messages in thread
From: Shawn Guo @ 2021-12-21 6:57 UTC (permalink / raw)
To: Arnd Bergmann
Cc: SoC Team, arm-soc, Fabio Estevam, Stefan Agner, Li Yang,
Sascha Hauer, NXP Linux Team, Linux ARM
On Mon, Dec 20, 2021 at 05:28:04PM +0100, Arnd Bergmann wrote:
> On Sat, Dec 18, 2021 at 8:14 AM Shawn Guo <shawnguo@kernel.org> wrote:
> >
> > The following changes since commit fa55b7dcdc43c1aa1ba12bca9d2dd4318c2a0dbf:
> >
> > Linux 5.16-rc1 (2021-11-14 13:56:52 -0800)
> >
> > are available in the Git repository at:
> >
> > git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-drivers-5.17
> >
> > for you to fetch changes up to 7f511d514e8c34b6dd0c17b5496e48b2a6a2626c:
> >
> > soc: imx: imx8m-blk-ctrl: add i.MX8MN DISP blk-ctrl (2021-12-17 10:53:20 +0800)
> >
> > ----------------------------------------------------------------
> > i.MX drivers update for 5.17:
> >
> > - A number of patches from Adam Ford to update gpcv2 and blk-ctrl driver
> > to keep i.MX8MM VPU-H1 and i.MX8MN GPUMIX bus clocks active, and add
> > i.MX8MN display related domain support.
> > - Add optional continuous burst clock support for imx-weim bus driver.
> > - Call pm_runtime_put_sync_suspend() instead of pm_runtime_put() in
> > gpcv2 driver to prevent a sequence issue seen with i.MX8MM GPU and
> > MIX domain.
>
> Thanks, I've pulled all six tags now, but I don't know why there are no
> automated emails about them, this seems to happen for some senders
> but not others.
I sent the PRs in form of patches (manually editing) with 'git
send-email'. I have been doing this for years, and I used to get
automated emails about merging. Not sure what's changed recently.
Shawn
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [GIT PULL 1/6] i.MX drivers update for 5.17
2021-12-21 6:57 ` Shawn Guo
@ 2021-12-23 15:04 ` Arnd Bergmann
0 siblings, 0 replies; 9+ messages in thread
From: Arnd Bergmann @ 2021-12-23 15:04 UTC (permalink / raw)
To: Shawn Guo
Cc: Arnd Bergmann, SoC Team, arm-soc, Fabio Estevam, Stefan Agner,
Li Yang, Sascha Hauer, NXP Linux Team, Linux ARM
On Tue, Dec 21, 2021 at 7:57 AM Shawn Guo <shawnguo@kernel.org> wrote:
> On Mon, Dec 20, 2021 at 05:28:04PM +0100, Arnd Bergmann wrote:
> >
> > Thanks, I've pulled all six tags now, but I don't know why there are no
> > automated emails about them, this seems to happen for some senders
> > but not others.
>
> I sent the PRs in form of patches (manually editing) with 'git
> send-email'. I have been doing this for years, and I used to get
> automated emails about merging. Not sure what's changed recently.
I don't think anything changed, there are always a few that fail to get updated
by patchwork, and I've never quite figured out the difference to those that
work.
Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 9+ messages in thread