From: Evgeny Boger <boger@wirenboard.com>
To: Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
linux-arm-kernel@lists.infradead.org
Cc: Evgeny Boger <boger@wirenboard.com>,
devicetree@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
linux-sunxi@lists.linux.dev
Subject: [PATCH v4 3/3] ARM: dts: sun8i: r40: add second ethernet support
Date: Tue, 11 Jan 2022 19:06:00 +0300 [thread overview]
Message-ID: <20220111160600.58384-4-boger@wirenboard.com> (raw)
In-Reply-To: <20220111160600.58384-1-boger@wirenboard.com>
R40 (aka V40, A40i, T3) has two different Ethernet IPs
called EMAC and GMAC. EMAC only support 10/100 Mbit in MII mode,
while GMAC support both 10/100 (MII) and 10/100/1000 (RGMII).
In contrast to A10/A20 where GMAC and EMAC share the same pins
making EMAC somewhat pointless, on R40 EMAC can be routed to port H.
Both EMAC (on port H) and GMAC (on port A) can be then enabled at
the same time, allowing for two ethernet ports.
Signed-off-by: Evgeny Boger <boger@wirenboard.com>
---
arch/arm/boot/dts/sun8i-r40.dtsi | 49 ++++++++++++++++++++++++++++++++
1 file changed, 49 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index 1d87fc0c24ee..870d63fae1fc 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -217,6 +217,19 @@ syscon: system-control@1c00000 {
#size-cells = <1>;
ranges;
+ sram_a: sram@0 {
+ compatible = "mmio-sram";
+ reg = <0x00000000 0xc000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x00000000 0xc000>;
+
+ emac_sram: sram-section@8000 {
+ compatible = "allwinner,sun4i-a10-sram-a3-a4";
+ reg = <0x8000 0x4000>;
+ };
+ };
+
sram_c: sram@1d00000 {
compatible = "mmio-sram";
reg = <0x01d00000 0xd0000>;
@@ -543,6 +556,24 @@ gmac_rgmii_pins: gmac-rgmii-pins {
drive-strength = <40>;
};
+ emac_pa_pins: emac-pa-pins {
+ pins = "PA0", "PA1", "PA2",
+ "PA3", "PA4", "PA5", "PA6",
+ "PA7", "PA8", "PA9", "PA10",
+ "PA11", "PA12", "PA13", "PA14",
+ "PA15", "PA16";
+ function = "emac";
+ };
+
+ emac_ph_pins: emac-ph-pins {
+ pins = "PH8", "PH9", "PH10", "PH11",
+ "PH14", "PH15", "PH16", "PH17",
+ "PH18","PH19", "PH20", "PH21",
+ "PH22", "PH23", "PH24", "PH25",
+ "PH26", "PH27";
+ function = "emac";
+ };
+
i2c0_pins: i2c0-pins {
pins = "PB0", "PB1";
function = "i2c0";
@@ -980,6 +1011,24 @@ gmac_mdio: mdio {
};
};
+ emac: ethernet@1c0b000 {
+ compatible = "allwinner,sun8i-r40-emac";
+ reg = <0x01c0b000 0x1000>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_EMAC>;
+ resets = <&ccu RST_BUS_EMAC>;
+ allwinner,sram = <&emac_sram 1>;
+ status = "disabled";
+ };
+
+ emac_mdio: mdio@1c0b080 {
+ compatible = "allwinner,sun4i-a10-mdio";
+ reg = <0x01c0b080 0x14>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
mbus: dram-controller@1c62000 {
compatible = "allwinner,sun8i-r40-mbus";
reg = <0x01c62000 0x1000>;
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
prev parent reply other threads:[~2022-01-11 16:08 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-11 16:05 [PATCH v4 0/3] sun8i: r40: second ethernet support Evgeny Boger
2022-01-11 16:05 ` [PATCH v4 1/3] net: allwinner: reset control support Evgeny Boger
2022-01-12 9:09 ` Corentin Labbe
2022-01-11 16:05 ` [PATCH v4 2/3] dt-bindings: net: support for Allwinner R40 EMAC controller Evgeny Boger
2022-01-12 9:04 ` Maxime Ripard
2022-01-11 16:06 ` Evgeny Boger [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220111160600.58384-4-boger@wirenboard.com \
--to=boger@wirenboard.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=mripard@kernel.org \
--cc=robh+dt@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox